Thingiverse
Doweling Jig by armourcraft
by Thingiverse
Last crawled date: 3 years ago
This is a 1/4" doweling jig that I created to help me through a project build. It was designed to work on 3/4" plywood or MDF, but I'm sure you can easily change that. I looked into commercially made jigs but they were all too expensive. So I decided to print my own!
You will need the following from the big box store, or off the interwebs (your choice):
2 - #6 x 1" machine screws
2 - #6 hex nuts
1 - 3/8" OD x 1/4" ID x 1/2" long metal spacer/bushing (steel or bronze should work)
I printed mine with the sides that would be facing the inside of the jig on the bed as to have them as flat as possible. The spacer should be a nice, tight press fit, but if it's loose, super glue should help do the trick. Once assembled, use a your 1/4" drill bit to finish drilling the hole in the dill plate. Then use a knife or the like to clean up the tear out. Done.
Hope you guys find this useful. It worked great for me and saved me about $60! Enjoy!
You will need the following from the big box store, or off the interwebs (your choice):
2 - #6 x 1" machine screws
2 - #6 hex nuts
1 - 3/8" OD x 1/4" ID x 1/2" long metal spacer/bushing (steel or bronze should work)
I printed mine with the sides that would be facing the inside of the jig on the bed as to have them as flat as possible. The spacer should be a nice, tight press fit, but if it's loose, super glue should help do the trick. Once assembled, use a your 1/4" drill bit to finish drilling the hole in the dill plate. Then use a knife or the like to clean up the tear out. Done.
Hope you guys find this useful. It worked great for me and saved me about $60! Enjoy!
Similar models
thingiverse
free
1/4 inch Centering Dowel Drill Jig by armourcraft
... the spacer i used:https://www.lowes.com/pd/hillman-5-count-0-250-in-x-3-8-in-plain-steel-standard-sae-flat-washer/3012470
enjoy!
thingiverse
free
Doweling Jig by photoresistor
...rotect the print from the rotating drill bit, and likely glue the spacer into place so it doesn't break loose as it heats up.
thingiverse
free
Dowel Jig by weepysplash
...hole using a 3/8" bit.
i placed a 3/8" copper coupling in the printed hole to help protect the plastic from the drill.
thingiverse
free
Cheese Jig by StriggityStrack
...ic to a project i completed but i was asked to share. i also used 1/2"od 3/8" id steel spacers as guides for the drill.
thingiverse
free
3/8 Dowel jig by rye71
...quires a 1/2" od steel spacer with 3/8id". i made it extra thick with a slightly wider slot to allow using a #2 pencil.
thingiverse
free
Doweling Jig by DavidTheMakewright
...or different offset.
part is printed as two pieces, to be glued together. 1/4" drill bit required to use, clamp recommended.
thingiverse
free
Doweling Jig
...jig to the workpiece with a spring clamp or similar i'd recommend printing this with something like petg or...
thingiverse
free
Kreg mini adapter
....
drill a single hole through the most forward hole of the adapter.
the second file is a colette measuring jig for the drill bit.
thingiverse
free
1/4" Dowel jig by Thirtybird
...a slot to align your mark with the hole to be drilled.
print the two pieces individually and assemble with m3 countersink screws.
thingiverse
free
Drill Jig to cross drill dowel on-center. Shown with 1/4" I.D. drill bushing installed.
...r dowels. i is made to take a standard interchangeable bushing. you could design & print your own of various sizes to suit.
Armourcraft
thingiverse
free
Tower of Hanoi by armourcraft
...tor for our local school system. she came across this puzzle at a seminar she attended and asked me to make one. so i did. enjoy.
thingiverse
free
Checkers Tray by armourcraft
...72.
it was designed to match the feet of the board i created, which can be found here: https://www.thingiverse.com/thing:2808678.
thingiverse
free
Chess Board Foot by armourcraft
...aple and peruvian walnut. the squares are 1.25". there is a through hole for mounting the foot to the board with a #6 screw.
thingiverse
free
Zipper Pulls by armourcraft
...around and through itself (if that makes sense).
the begleri listing can be found here: https://www.thingiverse.com/thing:2964562
thingiverse
free
Checkers by armourcraft
...hess set design.
i also created a tray to put the checkers in, which can be found here: https://www.thingiverse.com/thing:2824578
thingiverse
free
Skully by armourcraft
...8: i refined the design a bit and uploaded higher resolution files. if you have download before now, i suggest downloading again.
thingiverse
free
Skully Pull by armourcraft
... resolution file, which is probably over-kill for this but oh well. if you have download before now, i suggest downloading again.
thingiverse
free
Classic "T" Puzzle by armourcraft
...ur hand at.
spoiler note: if you don't want to know the solution, check out the attached pdf after you have solved it!
enjoy.
thingiverse
free
Skully Bowl by armourcraft
...ppy printing!
update: i have included a solid model file (vmode) for those of you that would like to run this print in vase mode.
thingiverse
free
Gladiator Helmet for Skully by armourcraft
...on to this when slicing. scaling it will be extra tricky, i'm sure
would like to see what others come up with as well. enjoy!
Doweling
3ddd
$1
Dowel
...dowel
3ddd
dowel
кресло dowel
ширина 81,5см
глубина сидения 92см
высота 72см
3ddd
$1
Кресло Dowel
...кресло dowel
3ddd
dowel
кресло dowel
turbosquid
$12
dowel
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Dowel Armchair
...sean dix , dowel
dimensions: 72cm height x 92.3cm depth x 81.5cm width
seat height: 37cm
turbosquid
$25
Dowel by Ton
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
Steel dowel
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Plastic dowel
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Wooden Dowel Pin
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
Dowel Two Seater by TON
...owel two seater by ton for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1437699)
3ddd
$1
Dowel 3 Seat Sofa
...dowel 3 seat sofa
3ddd
sean dix
sean dix
dowel 3 seat sofa
dimensions: 72cm height x 92.3cm depth x 210cm width
seat height: 37cm
Jig
turbosquid
$25
jig-saw_mid_SM
...uid
royalty free 3d model jig-saw_mid_sm for download as obj on turbosquid: 3d models for games, architecture, videos. (1244761)
turbosquid
$20
jig-saw_low
...osquid
royalty free 3d model jig-saw_low for download as obj on turbosquid: 3d models for games, architecture, videos. (1244760)
turbosquid
$10
jig-saw_hi
...bosquid
royalty free 3d model jig-saw_hi for download as obj on turbosquid: 3d models for games, architecture, videos. (1244757)
turbosquid
$7
Jig Armchair
...squid
royalty free 3d model jig armchair for download as max on turbosquid: 3d models for games, architecture, videos. (1648936)
turbosquid
$5
Jig Tail
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Jig Head
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Jig Head
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Jig Head
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Jig Head
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Jig Head
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.