Thingiverse
Double Edge (DE) Razor Blade Storage Box by MrPeter
by Thingiverse
Last crawled date: 4 years, 1 month ago
This is a storage box for double edge (DE) razor blades. I measured various card and plastic 5 blade boxes and got a maximum size for each. (I only had Derby and Feather plastic boxes to measure).
Each slot is 54mm wide, 100mm high, 32mm deep minus 2mm ridges in the bottom.
There's an extra space at the front of the box for other items. I chose not to make the slots wide enough for the oversized Wilkinson sword blades as they aren't something I will be using in future anyway.
This box will hold roughly:
16 Feather blade boxes (8 per row)
or
~22 Cardboard blade boxes (11 per row)
Features:
Raised 'rails' in the base making it easier to pick up items if this is used to store single razor blades.
Cut out at the front of the holders to make taking items out easier when it's full
Center cut out to also make it easier to take items out.
Front tray for oversized items.
Optional parts:
Lid which snaps on.
Divider
Divider which will hold loose blades.
'Front Divider' which will divide the front compartment into two so it can be filled with more razor blades. (This is untested)
I printed all items as they are shown in the photos, without any supports.
Other shaving items I've created:
Shaving brush holder: https://www.thingiverse.com/thing:3116295
Shaving lathering mug / bowl: https://www.thingiverse.com/thing:3120393
Each slot is 54mm wide, 100mm high, 32mm deep minus 2mm ridges in the bottom.
There's an extra space at the front of the box for other items. I chose not to make the slots wide enough for the oversized Wilkinson sword blades as they aren't something I will be using in future anyway.
This box will hold roughly:
16 Feather blade boxes (8 per row)
or
~22 Cardboard blade boxes (11 per row)
Features:
Raised 'rails' in the base making it easier to pick up items if this is used to store single razor blades.
Cut out at the front of the holders to make taking items out easier when it's full
Center cut out to also make it easier to take items out.
Front tray for oversized items.
Optional parts:
Lid which snaps on.
Divider
Divider which will hold loose blades.
'Front Divider' which will divide the front compartment into two so it can be filled with more razor blades. (This is untested)
I printed all items as they are shown in the photos, without any supports.
Other shaving items I've created:
Shaving brush holder: https://www.thingiverse.com/thing:3116295
Shaving lathering mug / bowl: https://www.thingiverse.com/thing:3120393