Thingiverse
Double Decker V2 200 FPV racer by janmittner
by Thingiverse
Last crawled date: 3 years, 4 months ago
UPDATE: There is a new V3 version with reinforced arms for 2204 motors: http://www.thingiverse.com/thing:1277212
Double Decker V2 200 is a mini 180/200 class FPV racing quad which is designed for ultimate flight performance on 4" propellers.
Main features include:
two decks for optimal mass distribution
square shaped motor positions for great balance and handling
motors and VTx protectors
FPV camera 25 degree mount
rigid and reinforced frame parts
lightweight (75 g)
standard size components
Frame's speciality is that it has two decks - in front it's tall enough to cover 32x32 mm FPV camera like Sony PZ0420. Rear part is as flat as possible (10 mm) so that the battery is close to the center of gravity and to the center of thrust for better flight performance.
With this copter and setup below I have flown best time at kart racing spot yet: https://www.youtube.com/watch?v=RN-JIWSBnYY.
Motors are placed in square shaped footprint so that it has better balance and handling in all axes.
VTx and motors are protected by integrated bumpers. The frame also features lightweight sidewalls to protect all the cables etc. When printed in ABS with 100% infill it's also very rigid and will survive many crashes.
FPV camera plate has fixed angle of 25 degrees for speed flying. Of course, the angle can be finely tuned by placing spacers between the camera and plate.
Total frame weight is about 75 grams (ABS, 100% infill, M2.5 self-tapping screws), AUW with FPV gear and 3s lipo 1000 mAh is about 340 grams. Using 4S and DAL 4045 BN propellers it features incredible power to weight ratio of about 6:1.
My recommended build setup uses standard size components like 1806 motors, CC3D atom flight controller board and full size FPV camera. Rear part includes CC3D atom flight controller (without plastic cover) that is partly embedded to bottom plate. Behind FC is a place for VTX, ideally some flat one like TS5823. There is enough space for placing receiver below the FC and VTX in the lower part of the frame. The frame is also very easy to print.
Recommended setup:
motors: 4x 1806 2280kv (or 1306 3100kv)
ESCs: 4x ZTW Spider 18A (or similar size and amps)
flight controller: CC3D Atom
propeller: DAL 4045 BN (or similar)
battery: 3S-4S LiPo 850-1300 mAh
FPV camera: Sony PZ0420
video TX: TS5823 200mW
Software:
BLHeli14.1 firmware for ESCs + Damped Light mode + Oneshot125
Cleanflight Luxfloat controller PIDs:
roll/pitch: 2, 0.040, 30
yaw: 6, 0.040, 5
looptime: 1800
Let me know how it flies for you. My intention is to design the best printable 4" FPV racing quad. Thanks and have fun!
Double Decker V2 200 is a mini 180/200 class FPV racing quad which is designed for ultimate flight performance on 4" propellers.
Main features include:
two decks for optimal mass distribution
square shaped motor positions for great balance and handling
motors and VTx protectors
FPV camera 25 degree mount
rigid and reinforced frame parts
lightweight (75 g)
standard size components
Frame's speciality is that it has two decks - in front it's tall enough to cover 32x32 mm FPV camera like Sony PZ0420. Rear part is as flat as possible (10 mm) so that the battery is close to the center of gravity and to the center of thrust for better flight performance.
With this copter and setup below I have flown best time at kart racing spot yet: https://www.youtube.com/watch?v=RN-JIWSBnYY.
Motors are placed in square shaped footprint so that it has better balance and handling in all axes.
VTx and motors are protected by integrated bumpers. The frame also features lightweight sidewalls to protect all the cables etc. When printed in ABS with 100% infill it's also very rigid and will survive many crashes.
FPV camera plate has fixed angle of 25 degrees for speed flying. Of course, the angle can be finely tuned by placing spacers between the camera and plate.
Total frame weight is about 75 grams (ABS, 100% infill, M2.5 self-tapping screws), AUW with FPV gear and 3s lipo 1000 mAh is about 340 grams. Using 4S and DAL 4045 BN propellers it features incredible power to weight ratio of about 6:1.
My recommended build setup uses standard size components like 1806 motors, CC3D atom flight controller board and full size FPV camera. Rear part includes CC3D atom flight controller (without plastic cover) that is partly embedded to bottom plate. Behind FC is a place for VTX, ideally some flat one like TS5823. There is enough space for placing receiver below the FC and VTX in the lower part of the frame. The frame is also very easy to print.
Recommended setup:
motors: 4x 1806 2280kv (or 1306 3100kv)
ESCs: 4x ZTW Spider 18A (or similar size and amps)
flight controller: CC3D Atom
propeller: DAL 4045 BN (or similar)
battery: 3S-4S LiPo 850-1300 mAh
FPV camera: Sony PZ0420
video TX: TS5823 200mW
Software:
BLHeli14.1 firmware for ESCs + Damped Light mode + Oneshot125
Cleanflight Luxfloat controller PIDs:
roll/pitch: 2, 0.040, 30
yaw: 6, 0.040, 5
looptime: 1800
Let me know how it flies for you. My intention is to design the best printable 4" FPV racing quad. Thanks and have fun!
Similar models
thingiverse
free
Double Decker 175 mini FPV quadcopter by janmittner
...flight controller: cc3d atom propeller: dal 4045 bn (or similar battery: 3s-4s lipo 850-1300 mah fpv camera: sony pz0420...
thingiverse
free
Double Decker V3 200 FPV racer for 2204 motors by janmittner
...flight controller: cc3d atom propeller: dal 4045 bn (or similar e.g. triblade) battery: 3s-4s lipo 850-1300 mah fpv camera:...
thingiverse
free
Johnybee180 FPV Quadcopter by janmittner
...2280kv (or 1306 3100kv) escs: 4x dys sn16a (or similar size and amps) flight controller: cc3d atom (or naze32)...
thingiverse
free
Precious X Frame Racer 220 by joaoprecivalli
...tery 3s-4s 1300mah
flight controler cc3d/naze/kiss/spracing
pdb matek 12v-5v
props 5"
fpv 200mw vtx mini
gopro/mobius/runcam
thingiverse
free
yellow bee 160 copter racer by ZiegeOne
...306 3100kv motor cw/ccw
openpilot cc3d atom mini cc3d fpv flight controller
eachine et25 5.8g 32ch
gemfan 4x4,5 4045 propellers
thingiverse
free
Johnybee210 FPV Quadcopter by janmittner
...2300kv (or 2204 2300kv) escs: 4x dys sn16a (or similar size and amps) flight controller: cc3d (or naze32) propeller:...
thingiverse
free
Mini spider 250 quadcopter v3 by vpoten
... setup, 12a (or 18a) esc (ultra fast flight):
2207-2100kv or 2208-2000kv motors, 5x45 propellers, 4s 1600 35c battery.
enjoy!
3dwarehouse
free
FPV racing quadcopter / multirotor
...6 motors 20a esc naze32 flight controller volo mini pdb bonka 1300mah 4s 65c battery hs1177 camera #multirotor #quadcopter #racer
thingiverse
free
Mini spider quadcopter PD2015 by vpoten
... setup, 12a (or 18a) esc (ultra fast flight):
2207-2100kv or 2208-2000kv motors, 5x45 propellers, 4s 1600 35c battery.
enjoy!
3dwarehouse
free
x210 race quad
...10 stretched frame f3v4 pro aio flight controller runcam swift 2 fpv camera dys xsd 30a esc dys fire 2205 motors 4s tattu battery
Janmittner
thingiverse
free
QAV210 motor protector by janmittner
...qav210 motor protector by janmittner
thingiverse
i designed this light protector to save my cobra motors on qav 210.
thingiverse
free
QAV210 motor protector (rounded) by janmittner
...qav210 motor protector (rounded) by janmittner
thingiverse
i designed this light protector to save my cobra motors on qav 210.
thingiverse
free
BDX Racer FPV mini quad motor protector by janmittner
...bdx racer fpv mini quad motor protector by janmittner
thingiverse
simple motor guard for red20rc bdx racer
thingiverse
free
Johnybee180 FPV Quadcopter by janmittner. "SKY Version" by skydge
...actualización placa superior.
con xt60 macho y soporte para antena a 45º
special thanks to janmittner by those very good designs.
thingiverse
free
ZMR250 motor protector 2204 2206 2208 by janmittner
...50 has quite narrow arms, any 220x motor is not very well protected. so i created this motor protection to have the motors safer.
thingiverse
free
ZMR250 Low Rider modification by janmittner
...hardware:
2x 35mm spacer
6x 20mm spacer
2x 13mm spacer
of course you can change the height of spacers to adjust it to your needs.
thingiverse
free
SJ4000 - 20 degree tilted mount for FPV quadcopter by janmittner
... any fpv quad. simply attach the mount to the frame with double-sided tape, put the camera on it and wrap with some velcro strap.
thingiverse
free
Xiaomi Yi - 20 degree tilted mount for FPV quadcopter by janmittner
... any fpv quad. simply attach the mount to the frame with double-sided tape, put the camera on it and wrap with some velcro strap.
thingiverse
free
Rotorama Mefisto / Morfeus HD camera mount by janmittner
...er of the frame.
no supports or rafts needed, very easy to print. recommended to print with tpu but also abs or pla should work.
thingiverse
free
Johnybee180 FPV Quadcopter by janmittner
...ttp://www.thingiverse.com/thing:1069161) and smaller for 3" propellers (http://www.thingiverse.com/thing:1091279).
have fun!
Decker
3ddd
$1
Шуруповерт Black Decker
... black decker , инструмент
модель шуруповерта black & decker
3ddd
free
Перфоратор Black Decker
... black decker , дрель
аккамуляторная дрель-перфоратор black decker
3ddd
$1
Iron BLACK & DECKER
...iron black & decker
3ddd
утюг , black&decker
iron black & decker
3ddd
$1
Black & Decker шуруповерт
...ерт
3ddd
black decker , шуруповерт
модель шуруповерта black & decker, материалы vray
3ddd
$1
Black & Decker электропила
... электропила , лобзик
модель электропилы black & decker, материалы vray
turbosquid
$5
Pouf Yachtline decker
...
royalty free 3d model pouf yachtline decker for download as on turbosquid: 3d models for games, architecture, videos. (1604045)
turbosquid
$5
Double Decker Bus
...royalty free 3d model double decker bus for download as blend on turbosquid: 3d models for games, architecture, videos. (1713921)
turbosquid
$12
Black and Decker Drill
...model black and decker drill for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1207759)
turbosquid
$10
Decker Flannel Chair
... model decker flannel chair for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1253441)
3ddd
$1
Black & Decker ударная дрель
... дрель , сверло
моделька ударной дрели black & decker, материалы vray
Racer
3ddd
$1
CILEK (Racer)
...cilek (racer)
3ddd
cilek
набор детской мебели cilek (серия racer)http://www.cilek.com/ru/sl-racer
turbosquid
$36
racer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Lego Racers
...lego , racers , конструктор
8667 action wheelie
turbosquid
$80
RACER 7
...turbosquid
royalty free 3d model racer 7 for download as c4d on turbosquid: 3d models for games, architecture, videos. (1417228)
turbosquid
$80
RACER 8
...turbosquid
royalty free 3d model racer 8 for download as c4d on turbosquid: 3d models for games, architecture, videos. (1415462)
turbosquid
$80
RACER 9
...turbosquid
royalty free 3d model racer 9 for download as c4d on turbosquid: 3d models for games, architecture, videos. (1417297)
turbosquid
$8
Spacecraft Racer
...d
royalty free 3d model spacecraft racer for download as fbx on turbosquid: 3d models for games, architecture, videos. (1298320)
turbosquid
$20
Pod Racer
...
royalty free 3d model pod racer for download as jpg and fbx on turbosquid: 3d models for games, architecture, videos. (1156525)
turbosquid
$59
Spaceship Racer
...ty free 3d model space craft racer for download as ma and fbx on turbosquid: 3d models for games, architecture, videos. (1408093)
turbosquid
$80
lego Racer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Fpv
turbosquid
$1
FPV VTX Antenna
...e 3d model fpv vtx antenna for download as obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1230317)
3d_export
$9
Fpv logo 3D Model
...onogram vehicle part of auto transport 3d model logo emblem detailed high quality badge
fpv logo 3d model rmodeler 59628 3dexport
3d_export
$8
dji fpv battery slot holder
...er for 3 dji fpv batteries. holds perfectly without shaking. need 1 m3 countersunk head bolt. need to print 6 pin, 1 case, 1 cap.
3d_export
$10
fpv camera hd 700tvl
...aterials are logically named<br>the main format is in 3ds max 2009.<br>satisfcation garranteed..<br>thank you !
thingiverse
free
FpV Mount (SOPORTE FPV) by elborjas1987
...fpv mount (soporte fpv) by elborjas1987
thingiverse
this is a fpv mount with the same holes of naza base.
thingiverse
free
fpv by tbutera
...fpv by tbutera
thingiverse
fpv
thingiverse
free
fpv by tbutera
...fpv by tbutera
thingiverse
fpv
thingiverse
free
FPV DRONE ROOSTER DJI FPV PART
...fpv drone rooster dji fpv part
thingiverse
fpv drone rooster dji fpv install part
thingiverse
free
FPV monitor
...tml?rmmds=myorder&cur_warehouse=cn
link for download : https://cults3d.com/fr/mod%c3%a8le-3d/divers/fpv-monitor-ecran-fpv-faf
thingiverse
free
FPV receiver mount for FPV display by petrex
...eceiver mount for fpv display by petrex
thingiverse
aomway receiver mount for field view 777 fpv monitor. with small cable tray.
200
design_connected
$27
Nonnamaria 200
...nonnamaria 200
designconnected
flexform nonnamaria 200 computer generated 3d model.
design_connected
$27
Lifewood 200
...lifewood 200
designconnected
flexform lifewood 200 computer generated 3d model.
design_connected
free
XZ3 200
...xz3 200
designconnected
free 3d model of xz3 200 by magis designed by van onck, andries & hiroko.
3d_export
$17
Boeing 717-200
...boeing 717-200
3dexport
boeing 717-200
3ddd
free
Possoni /200 / 25
...possoni /200 / 25
3ddd
possoni
possoni/200/25
turbosquid
$10
Set-200
...yalty free 3d model set-200 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1296305)
3ddd
$1
LG TS-200
...lg ts-200
3ddd
dvd , lg , пульт
lg ts-200
turbosquid
$5
Chair 200
...d model chair 200 for download as max, max, 3ds, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1647835)
turbosquid
$5
Chair 200
...d model chair 200 for download as max, max, 3ds, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1648696)
turbosquid
$3
200 Euro
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
V2
3d_export
free
Lamp v2
...lamp v2
3dexport
lamp v2 with solar panel
3d_export
$5
hammerhead v2
...hammerhead v2
3dexport
razer hammerhead v2 headphones, modeled in cinema 4d, render in corona
3d_export
$5
manometer v2
...manometer v2
3dexport
3d_export
$5
potato v2
...potato v2
3dexport
turbosquid
$52
Lifebuoys v2
...squid
royalty free 3d model lifebuoys v2 for download as fbx on turbosquid: 3d models for games, architecture, videos. (1560870)
turbosquid
$2
Mask v2
...turbosquid
royalty free 3d model mask v2 for download as stl on turbosquid: 3d models for games, architecture, videos. (1527741)
turbosquid
free
Flashlight V2
...d
free 3d model flashlight v2 for download as , obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1663559)
turbosquid
$29
Thanos v2
...
royalty free 3d model thanos v2 for download as ztl and obj on turbosquid: 3d models for games, architecture, videos. (1651077)
turbosquid
$29
Titan v2
...d
royalty free 3d model titan v2 for download as ztl and obj on turbosquid: 3d models for games, architecture, videos. (1540228)
turbosquid
$29
Frieza v2
...
royalty free 3d model frieza v2 for download as ztl and obj on turbosquid: 3d models for games, architecture, videos. (1701238)
Double
3ddd
free
Double
...double
3ddd
double , sicis
диван double от итальянской фабрики sicis next art
3d_ocean
$5
double stairs
...double stairs
3docean
double stairs
double stairs
3d_export
$5
double handle
...double handle
3dexport
double handle
3d_export
$5
double fastener
...double fastener
3dexport
double fastener
3ddd
$1
double bed
...double bed
3ddd
двуспальная
double bed
design_connected
free
Chair Double
...chair double
designconnected
free 3d model of chair double
3ddd
$1
Double Leaves
...double leaves
3ddd
double leaves
кресло китайской фабрики double leaves. vray, 3dmax 2013, гамма 2.2, текстуры в комплекте.
3ddd
free
Люстра Double
...люстра double
3ddd
double , david chipperfield
2004
размеры в архиве
3d_export
free
couch - double
...couch - double
3dexport
couch double with texture and .psd files for personal customization
3d_export
$10
double layer double speed chain
...d chain
3dexport
double layer speed chain (design very detailed) 3d model drawing model file reference using solidworks software