Thingiverse
Dog_bone_connector by FeKo
by Thingiverse
Last crawled date: 4 years, 5 months ago
this is a first test to create a connector to connect countertops eg if you have a corner or something.
essentially you need two parts, and connect them with a hex screw.
the drill holes you need are configureable.
keep in mind that you need space for the spanner
the three .stl files are versions for M4 carriage bolts, M4 hex bolts or nuts and a flat one.
essentially you need two parts, and connect them with a hex screw.
the drill holes you need are configureable.
keep in mind that you need space for the spanner
the three .stl files are versions for M4 carriage bolts, M4 hex bolts or nuts and a flat one.