Document Stand | 3D

Last crawled date: 4 years ago

I occasionally need one of these to hold a paper or few for reference or transcribing, but never got around to ordering one. Now, while quarantining from the Covid virus, I took the time to design and make one, and my 3D printer has just enough capacity to make it work. I did have to reduce the width 7½” to fit the 8” Z-height, and place the backboard diagonally on the build plate. The two parts fit easily, and were printed with Tiertime Grey PLA (the color is actually more like Eggshell, a very light grey), in 0.35mm layers; backboard and stand are 0.10” thick, with 99% fill.