Thingiverse
Doctopi Corexy Morpheus v0.7 by Bensn
by Thingiverse
Last crawled date: 4 years, 7 months ago
a partly planned xl z-Morph
design is for better volume/printarea Proportion (50% Printvolume)
more useable printspace in the same framesize
rsdocs included, feel free to improve and comment
in Desing Spark you can move the Y-axle, the bed an the extruder to check he free moving http://www.youtube.com/watch?v=98aCXEPEeL4
ready for print parts are in black,
thoughts:
put all Steppers on one side to have more space,
belt driven z axis: no coupler needed,
gear driven (5:1) & 82 tooth pulley (16:80) z stepper, for more torque ( not testet )
i think z axes Speed isn´t Need for printig
alutubes on x axis for less weight of moving parts
self lubing bushings for silence
Vertical align x-rod tubes for more space to move
Nearly all parts are planned to print without support
includinghttp://www.thingiverse.com/make:282839http://www.thingiverse.com/thing:34174http://www.thingiverse.com/thing:2014273http://www.thingiverse.com/thing:8460http://www.thingiverse.com/thing:1997927
thanks a lot
print area is at least 500x500x500mm
Frame:
8x 20x20x700mm alu profiles
4x 20x20x800mm alu profiles
16x edgemounts for aluprofiles
100x m5 screws/nuts for aluprofiles
100x m5 nuts for aluprofiles
Electronics
arduino mega 2560
Ramps 1.4
Expansion board cnc shield grbl
Full graphics display with sd card reader
7x 4988 driver
7x nema17 stepper
1x bed level sensor m12
powersupply
10m GT2 Timingbelt & pulleys
5x 15x640mm rods
2x 15x640mm alutube
2x m8x600mm
4x 608zz
16x F623ZZ
16x Plain Bearing Sleeve fitted on rods
....
v0.7
penholder added,
full graphic display case added
eletronic case added,
rodholder with fixingpoint
v0.6 (first moving version)
printable Diamondhotendholder
more space for y bearings
v0.5
twisted extruderholder
expanded z movement
gt2 belt visualizing
v0.4
bedmounting
extrudermount for Diamond hotend
v0.3
bedsize optimized (600x600mm)
z-parts adapted
space for filamentspool and additional backcover
v0.2
changing frame parts to 700 and 800mm
v0.1
basic parts
design is for better volume/printarea Proportion (50% Printvolume)
more useable printspace in the same framesize
rsdocs included, feel free to improve and comment
in Desing Spark you can move the Y-axle, the bed an the extruder to check he free moving http://www.youtube.com/watch?v=98aCXEPEeL4
ready for print parts are in black,
thoughts:
put all Steppers on one side to have more space,
belt driven z axis: no coupler needed,
gear driven (5:1) & 82 tooth pulley (16:80) z stepper, for more torque ( not testet )
i think z axes Speed isn´t Need for printig
alutubes on x axis for less weight of moving parts
self lubing bushings for silence
Vertical align x-rod tubes for more space to move
Nearly all parts are planned to print without support
includinghttp://www.thingiverse.com/make:282839http://www.thingiverse.com/thing:34174http://www.thingiverse.com/thing:2014273http://www.thingiverse.com/thing:8460http://www.thingiverse.com/thing:1997927
thanks a lot
print area is at least 500x500x500mm
Frame:
8x 20x20x700mm alu profiles
4x 20x20x800mm alu profiles
16x edgemounts for aluprofiles
100x m5 screws/nuts for aluprofiles
100x m5 nuts for aluprofiles
Electronics
arduino mega 2560
Ramps 1.4
Expansion board cnc shield grbl
Full graphics display with sd card reader
7x 4988 driver
7x nema17 stepper
1x bed level sensor m12
powersupply
10m GT2 Timingbelt & pulleys
5x 15x640mm rods
2x 15x640mm alutube
2x m8x600mm
4x 608zz
16x F623ZZ
16x Plain Bearing Sleeve fitted on rods
....
v0.7
penholder added,
full graphic display case added
eletronic case added,
rodholder with fixingpoint
v0.6 (first moving version)
printable Diamondhotendholder
more space for y bearings
v0.5
twisted extruderholder
expanded z movement
gt2 belt visualizing
v0.4
bedmounting
extrudermount for Diamond hotend
v0.3
bedsize optimized (600x600mm)
z-parts adapted
space for filamentspool and additional backcover
v0.2
changing frame parts to 700 and 800mm
v0.1
basic parts