Thingiverse
Dock for Vivoactive by tomjuggles
by Thingiverse
Last crawled date: 3 years ago
To charge the Vivoactive on any USB power source, print the adapter.
Cut a USB cable- you need only red and black wires, you don't need the green and white- they are for data (the colors are specified, every USB cable should have identical coloring).
Drill two holes- see the photo, they are on the left hand side as seen from the top. For the precise position, I suggest to place the watch on the dock and copy the position of the contact plates.
The upper wire is minus (black), the lower is plus (red).
Either do the cheap version: solder the ends of the wires, have them peek out at the top. Zero cost, but the contact isn't very reliable.
Or buy spring loaded contacts- I used these: https://www.amazon.de/gp/product/B007Q847I0/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Perfect contact, but they only ship in quantities of 10 minimum.
Glue a magnet to the underside that keeps the watch attached to the holder.
Oh, and don't forget: you need to set the Vivoactice to
settings/system/USB mode: "mass storage" (not: "Garmin")
so that charging starts immediately when 5V is applied.
(the text "watch out" on the photo is a pun: it's only visible when the watch is removed- get it?)
Enjoy.
Cut a USB cable- you need only red and black wires, you don't need the green and white- they are for data (the colors are specified, every USB cable should have identical coloring).
Drill two holes- see the photo, they are on the left hand side as seen from the top. For the precise position, I suggest to place the watch on the dock and copy the position of the contact plates.
The upper wire is minus (black), the lower is plus (red).
Either do the cheap version: solder the ends of the wires, have them peek out at the top. Zero cost, but the contact isn't very reliable.
Or buy spring loaded contacts- I used these: https://www.amazon.de/gp/product/B007Q847I0/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Perfect contact, but they only ship in quantities of 10 minimum.
Glue a magnet to the underside that keeps the watch attached to the holder.
Oh, and don't forget: you need to set the Vivoactice to
settings/system/USB mode: "mass storage" (not: "Garmin")
so that charging starts immediately when 5V is applied.
(the text "watch out" on the photo is a pun: it's only visible when the watch is removed- get it?)
Enjoy.
Similar models
thingiverse
free
Huawei Watch Nighstand Charging Dock by agentdr8
...80 degree angle, with the crown button facing down. similar to the moto 360 charging dock, but since the...
thingiverse
free
LG G WATCH R charging dock by pattiuak
...ed to remove usb cable form the dock you must break the printed parts. keep in mind that hot glue & abs was very strong bond.
thingiverse
free
Apple Watch and Iphone X charger Stand by Silasderkreative
...'s and for the wireless and endless charging dock from fantasy. you have to print with support but you don't need a raft.
thingiverse
free
Apple Watch Compact Charging Dock by HsuCurtis
...tis
thingiverse
this is what i need for travel and work. roll the oem usb cable up quickly as compact apple watch charging dock.
thingiverse
free
Garmin Vivoactive 3 Charging Stand by Neva2L8
... i wanted a charging stand for my vivoactive 3 and just added a charge cable hole to the 12 o'clock position using tinkercad.
thingiverse
free
Nintendo Switch Lite Charging Dock
...c cable in place, and i recommend command strips to hold the dock in place when you're pulling it off the charger. have fun!
thingiverse
free
PebbleTime Dock by otaku
...in case you just use it as a display dock.
hope you like it.
**if you don't have a 3d printer look this dock up in etsy.
thingiverse
free
Honor Magic Watch 2 Charging Dock by SeFox
...ing pads with a diameter of 40mm can fit in it.
to hide the cable i have made a cable channel that runs behind the charging dock.
thingiverse
free
Asus ZenWatch II Charging Dock by Dutchswaggimous
...ble snaps into place and should be a tight fit, so that the cable doesn't come loose when lifting the watch up from the dock.
thingiverse
free
OnePlus Two Usb Dock (For One Plus Two) by nexster
...a photo of your make here! if you have any questions or suggestions, just write in the comments. :)
greets from germany,
nexster.
Tomjuggles
thingiverse
free
RAM mount for BMW R1100RT Motorcycle by tomjuggles
...p quite as much to keep it from moving.
update 2020: complete redesign for significantly increased stability and much better fit.
thingiverse
free
Trumpet Mute Holder by tomjuggles
...rinted base onto which i simply glued an aluminium profile and spraypainted it black. 2component epoxy resin works like a charm.
thingiverse
free
Key marker BMW Motorrad by tomjuggles
...eys look the same, so i made that key marker to tell them apart.
the key fits tightly, but for extra safey i used a drop of glue.
Vivoactive
thingiverse
free
Garmin Vivoactive 3 music cover by Luki71
...in vivoactive 3 music cover by luki71
thingiverse
protection cover for garmin vivoactive 3 music.
hard model.
printed with petg.
thingiverse
free
Watchband holder Garmin Vivoactive by vttek
...watchband holder garmin vivoactive by vttek
thingiverse
watch band holder for vivoactive. printed out of tpu
thingiverse
free
Garmin Charger Stand by Conor001
...these commonly available round garmin chargers. compatible with garmin vivoactive 3 / 4 / 4s / 3 music, garmin...
thingiverse
free
Watch Stand to "IKEA NORDMÄRKE Triple Pad for Wireless Charging" by emilenabass
...for the apple watch and also for the garmin vivoactive 4s. this is my first design. in case you...
thingiverse
free
Garmin Vivoactive 4S & Jaybird Vista Docking Station by amass3d
...t need any at all. print with 15-25% infill and preferably 3 outer perimenters. i printed mine in pearl mouse pla from prusament.
thingiverse
free
Vivoactive handlebar mount to use with or whithout charging cradle by Superole
...et and glue the two upper parts together.
use a piece of bicycle tube on the inside of the bracket.
2x m5x20 screw and 2x m5 nut.
thingiverse
free
Garmin Vivoactive3 Bike / Bicycle Mount by JKSniper
...also .step file attached.
it works really well and it's tested design with 500km+ of mtb cycling.
best regards,
jure korber
thingiverse
free
Thin watch band connector for Garmin Vivoactive by walljoh
...tor link to match up with the garmin vivoactive. i downloaded the original and reduced where it connects to the watch to 15.24mm.
thingiverse
free
Charging Station- Garmin Vivoactive 3, Smok Novo, Novo 2, Novo X and wireless charging compatible by jackjones111
...harging pads. this cleaned up the worlds biggest rats nest of cables from my desk. i hope someone out there gets use out of this.
thingiverse
free
Garmin Vivoactive 4 Protection Bezel by Florian1980
...is no print debris on the inside surfaces for a good fit.
print on highest resolution, 100% infill, no brim, no supports.
enjoy!
Dock
3d_export
$30
Pontoon 3D Model
...pontoon 3d model 3dexport pontoon bridge wood docks dock marine port lake sea ocean pontoon 3d model tartino...
3d_ocean
$2
Wood Planks
...wood planks 3docean 2d dock environment floor game game art ground hand painted panels...
3d_export
$100
Huge Warehouse 3D Model
...huge warehouse 3d model 3dexport warehouse industrial dock dock forklift pallet boxes cargo textured low poly storage building...
3d_export
$10
Trash container 3D Model
...box crate trailer train transportation industrial load port crane dock 3d model max trash container 3d model download .c4d...
cg_studio
$20
Footbridge Low Poly3d model
...lake forest river derelict boat edge pier molo water dock marina shore ship sea ocean .max .obj .fbx .3ds...
3ddd
$1
Retro Dock Station
...анция , радио , часы
докстанция для ipod/iphone
3ddd
$1
Bjorn Meier docks
... docks , модульный
bjorn meier docks
vray+corona
3ddd
$1
Y Chair - Tom Dixon
...y chair - tom dixon 3ddd tom dixon http://www.tomdixon.net/news/y-chair-launches-at-the-dockamp;nbsp; ...
3d_ocean
$12
Low Poly Container
...low poly container 3docean architecture buildings container crate dock environment fantasy fiction game art game engine gaming infrastructure...
3d_ocean
$15
Ipad
...ipad 3docean 3g 4g computer cover dock ebook ereader handheld ipad itablet materials mobile notebook pc...