Thingiverse
Dock for Asus Zenfone 3 (ZE552KL) 5.5" by keefien88
by Thingiverse
Last crawled date: 4 years, 1 month ago
It's a simple Dock for the Asus Zenfone 3 (5.5"), it can be used with a thin case, this was the main reson why i remixed the original design from https://www.thingiverse.com/thing:1778348
Other diffrence is that the holes are adapted to aftermarket USB-C cable from Rampow®
UPDATE MKIII:
increased some tolerances
made it a little bit longer for better stand
original USB cable should now fit too
You can use STL and slice by your own or use the provided gcode file, it was tested and printed very well.
Settings are:
layer height: 0.2
wall thickness: 1 mm
infill: 25%
fill method: triangle
wall speed: 20 mm/s
infill speed: 25 mm/s
fan speed: 100% at layer 2
Brim: 4 mm
i printed it with filamentive Carbon Fibre
Other diffrence is that the holes are adapted to aftermarket USB-C cable from Rampow®
UPDATE MKIII:
increased some tolerances
made it a little bit longer for better stand
original USB cable should now fit too
You can use STL and slice by your own or use the provided gcode file, it was tested and printed very well.
Settings are:
layer height: 0.2
wall thickness: 1 mm
infill: 25%
fill method: triangle
wall speed: 20 mm/s
infill speed: 25 mm/s
fan speed: 100% at layer 2
Brim: 4 mm
i printed it with filamentive Carbon Fibre