Thingiverse
Dji Spark clone (The Doji Spack) by shawdreamer
by Thingiverse
Last crawled date: 3 years ago
The FC mount can be printed in either flexi or solid filament but obviously flexi gives the FC added vibe damping.
The motor Dampners are also designed to be flexi but aernt essential for the build.
The FC of choice cannot use pinned connections as there's limited space under the canopy and direct wiring is just so much neater anyway
Any motor is usable upto 2205 in size (I originally planned to use 1806 but had the 2205's handy)
The Props I used are of a design that means they clear the top of the canopy, similar Tri's(such as DalDrops) or more common 2 blade props will strike the canopy unless a spacer is applied beneath the motors to lift them higher off the mounts.
The battery is the most restricted point in this design, obviously anything too big wont fit inside the removable battery bay and the bay itself is as large as the design allows without altering the design so much it no longer looks like a dji spark (which kinda defeats the whole point of the design really), I used a ZOP 850mah 70c which fits perfectly inside the bay.
The battery connector must be fixed in place once fitted (either hot glued or similar) to allow the bay to be slotted onto the frame and the battery terminals to mate without further fuss.
WARNING!:- incase the obvious didn't occur, you'll need a battery bay part for each battery!!
Hardware used :-
FC - Naze32 rev6 (direct soldered wiring, NO pins)
ESC - DYS 4in1 20A
MOTORS - Racerstar 2205 2300kv
PROPS - KingKong 5045 Tri's (with 5mm tip trimming)
RX - FRSky R6b (decased and unused pins removed)
BATTERY - ZOP Power 11.1V 850mah 70C 3S (size essential, no bigger dimensions)
FPV CAM - Eachine AIO TX03 (adapted from clover to whip antenna)
future add-ons/adaptions/revisions:-
Prop adapter to allow the use of genuine spark folding props (I already finished a design for 1806 motors but havnt perfected a version for 2205's like the racerstar with 5mm shafts yet)
Lower plate revision to allow the use of larger sized batteries without the use of the battery bay (no longer fully resembles a Spark but you can atleast opt to use higher cell (4s) and/or larger Mah Lipo's for greater flight time / Duration.
LED pods for the motor mounts (similar to the genuine spark), either fixed colour or utilizing the naze32's ability to control addressable LEDS and therefore display mode/battery status.
GPS!
The motor Dampners are also designed to be flexi but aernt essential for the build.
The FC of choice cannot use pinned connections as there's limited space under the canopy and direct wiring is just so much neater anyway
Any motor is usable upto 2205 in size (I originally planned to use 1806 but had the 2205's handy)
The Props I used are of a design that means they clear the top of the canopy, similar Tri's(such as DalDrops) or more common 2 blade props will strike the canopy unless a spacer is applied beneath the motors to lift them higher off the mounts.
The battery is the most restricted point in this design, obviously anything too big wont fit inside the removable battery bay and the bay itself is as large as the design allows without altering the design so much it no longer looks like a dji spark (which kinda defeats the whole point of the design really), I used a ZOP 850mah 70c which fits perfectly inside the bay.
The battery connector must be fixed in place once fitted (either hot glued or similar) to allow the bay to be slotted onto the frame and the battery terminals to mate without further fuss.
WARNING!:- incase the obvious didn't occur, you'll need a battery bay part for each battery!!
Hardware used :-
FC - Naze32 rev6 (direct soldered wiring, NO pins)
ESC - DYS 4in1 20A
MOTORS - Racerstar 2205 2300kv
PROPS - KingKong 5045 Tri's (with 5mm tip trimming)
RX - FRSky R6b (decased and unused pins removed)
BATTERY - ZOP Power 11.1V 850mah 70C 3S (size essential, no bigger dimensions)
FPV CAM - Eachine AIO TX03 (adapted from clover to whip antenna)
future add-ons/adaptions/revisions:-
Prop adapter to allow the use of genuine spark folding props (I already finished a design for 1806 motors but havnt perfected a version for 2205's like the racerstar with 5mm shafts yet)
Lower plate revision to allow the use of larger sized batteries without the use of the battery bay (no longer fully resembles a Spark but you can atleast opt to use higher cell (4s) and/or larger Mah Lipo's for greater flight time / Duration.
LED pods for the motor mounts (similar to the genuine spark), either fixed colour or utilizing the naze32's ability to control addressable LEDS and therefore display mode/battery status.
GPS!
Similar models
thingiverse
free
Mini FPV Tricopter by DarkButterflyRC
... front arms
designed for the mobius action cam and 1000mah 3s batteries.
added, landing gear adapter, fits universal landing legs
thingiverse
free
12x12 (1806) to 16x19 (2205) motor adapter by eligri
... a 1806 motor-mount that i wanted to use with a 2205 motor. holds fine with a couple screws, or zip-ties. pla or abs should work.
thingiverse
free
Micro Scisky FPV Quad by gibo
...d based on naze32 for multirotor)
motors: 8520 coreless motors.
prop: 75mm (0.97motor shaft id).
battery: 3.7 850mah 1s battery
grabcad
free
Drone Motor - 2205-2300 KV
...used as any 2205-2300 kv motor. the spacing and sizing of the tapped holes are correct as well, everything was designed to scale.
3dwarehouse
free
FPV racing quadcopter / multirotor
...6 motors 20a esc naze32 flight controller volo mini pdb bonka 1300mah 4s 65c battery hs1177 camera #multirotor #quadcopter #racer
thingiverse
free
Indestructible 8520 Racing Frame by KeanuLouw
...igy nano-tech 750mah 35-70c battery.
wish you the best of luck and please keep me up to date on your experience with this frame..
thingiverse
free
Micro quad with 16x16mm flight controller by ptgraham
..., and props are 2435 60mm 4 blade racerstar props. not a ton of power, but i get about 3 minutes fpv flight and is super quiet.
thingiverse
free
Mavic Pro Prop Adapter for 2212 RacerStar Motor w/ 6mm shaft by LKCreates_LayerOne
...- i'll be returning w/ a newer version or an update to indicate if this one works in flight or needs another design revision.
thingiverse
free
Delta Wing motor mount (1806, 2204, 2205+) with foam grip by donjakobo
...petg, then had it crack (bad batch of petg), reprinted in esun pla+ and it has been fantastic, no issues with pla for this part.
thingiverse
free
RCX 2206 Motor Wrench by calviniba
...the splines on the rcx 2206 and 2205 and similar motors. it makes tightening and loosening props much easier...
Doji
thingiverse
free
Shinoa Hiiragi Scythe - Seraph of the end by AmyCantFlyNow
...amycantflynow thingiverse this is a small scale verson of shikama-doji from seraph of the end, it can be scaled...
cg_trader
$5
Fate Shuten Doji Douji Assassin Cosplay Horns 3D Model STL File | 3D
...t horns! i’ve designed and 3d modeled these horns from reference photos using fusion 360. this is the 3d model to print yourself!
cg_trader
$5
Fate Ibaraki Douji Berserker Cosplay Horns 3D Model STL File | 3D
...stl file | 3d cg trader complete your ibaraki doji cosplay with the perfect horns! i’ve designed and 3d...
3dwarehouse
free
Bàn Doji
...bàn doji
3dwarehouse
max thang long
3dwarehouse
free
golden doji frame
...golden doji frame
3dwarehouse
Spack
thingiverse
free
E3Dv6 Bowden X-carriage mount V2 reversed by achmed20
...duct and mounting it with small wood screws (called "spack schrauben" in germany) since i realy dont wanna fiddle...
thingiverse
free
funnel for grillsauce- / barbeque-/ BBQ-sauce bottles by fabcam
...der trichter sitzt auf der innen- und außenseite ziemlich „spack. dadurch wackelt an der stelle auch nichts und es...
grabcad
free
spacks: the eyeglasses
...spacks: the eyeglasses
grabcad
eyeglasses just for fun
3dwarehouse
free
Barwise spacking
...barwise spacking
3dwarehouse
when i get angry i spack out at everyone around me #barwise #grandma_barwise
3dwarehouse
free
Titohendrata buggy modified
...it woudl behave better, so it can roll without spackng and i also gave it a basic collisionmesh #car...
Shawdreamer
thingiverse
free
printbed standoff feet by shawdreamer
...printbed standoff feet by shawdreamer
thingiverse
standoffs
thingiverse
free
spool holder (horizontal) by shawdreamer
...spool holder (horizontal) by shawdreamer
thingiverse
spool holder
thingiverse
free
6x3 bullnose prop by shawdreamer
...6x3 bullnose prop by shawdreamer
thingiverse
material - pla
thingiverse
free
standalone heatbed feet by shawdreamer
...standalone heatbed feet by shawdreamer
thingiverse
feet for mk2a/b heatbed
thingiverse
free
Yamato-Class Benchy by shawdreamer
...yamato-class benchy by shawdreamer
thingiverse
benchy got a buff-up
thingiverse
free
U-boat Benchy by shawdreamer
...u-boat benchy by shawdreamer
thingiverse
last in the series of benchy spin-offs.
thingiverse
free
H-copter Canopy by shawdreamer
...h-copter canopy by shawdreamer
thingiverse
lightweight protective canopy for h-copter design
thingiverse
free
Nimitz-class Benchy by shawdreamer
...nimitz-class benchy by shawdreamer
thingiverse
whats better than a battleship benchy?
a aircraft carrier benchy!!
thingiverse
free
thermostatic controller board enclosure (large) by shawdreamer
...thermostatic controller board enclosure (large) by shawdreamer
thingiverse
enclosure
thingiverse
free
printrite z-stop repair by shawdreamer
...printrite z-stop repair by shawdreamer
thingiverse
simple glue on z-stop repair for stated printer
Spark
3ddd
free
The Spark Table
...the spark table
3ddd
spark , dustfurniture
тумба - dust furniture - the spark table
3d_export
$5
spark plug
...spark plug
3dexport
spark plug
3d_export
free
spark plug
...spark plug
3dexport
spark plug
3ddd
$1
Chevrolet Spark
...chevrolet spark
3ddd
машина
chevrolet spark
3d_export
$6
spark plug
...plugs are designed to ignite the fuel-air mixture in the combustion chamber of an internal combustion engine by creating a spark.
3d_export
$15
spark plug
...spark plug
3dexport
spark plug 3d model. real-time ready, multiple import formats thank you for reading
turbosquid
$75
Spark Bass
...turbosquid
royalty free 3d model spark bass for download as on turbosquid: 3d models for games, architecture, videos. (1165685)
turbosquid
$5
Spark Plug
...bosquid
royalty free 3d model spark plug for download as fbx on turbosquid: 3d models for games, architecture, videos. (1260463)
turbosquid
$5
Bed Spark
...rbosquid
royalty free 3d model bed spark for download as c4d on turbosquid: 3d models for games, architecture, videos. (1322080)
turbosquid
$1
Spark-Plug
...rbosquid
royalty free 3d model spark-plug for download as ma on turbosquid: 3d models for games, architecture, videos. (1542080)
Dji
3ddd
free
Подвес DJI Zenmuse
... подвес
подвес dji zenmuse z15-5d для canon 5d mark ii/iiihttp://www.rcteam.ru/dji/zenmuse-z15-5d.html
3ddd
$1
шасси для рамы DJI S800
...еся шасси для рамы dji s800
dji s800 retractable landing skidhttp://www.rcteam.ru/dji/s800-retracting-landing-gear.html
3ddd
$1
DJI Phantom 2
... dji
450000 polys
швы корпуса могут показаться ошибкой моделинга, но это не совсем так!)
3d_ocean
$39
DJI Phantom3 Professional
...540 highly detailed model of the dji phantom3 professional quadcopter. the model is very highpoly (collapsed meshes, no modifi...
turbosquid
$1
dji osmo pocket
...
royalty free 3d model dji osmo pocket for download as blend on turbosquid: 3d models for games, architecture, videos. (1613550)
turbosquid
$98
DJI Inspire 1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
DJI Charging hub
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
cg_studio
$39
DJI Phantom3 Professional3d model
... model
cgstudio
.max .obj - dji phantom3 professional 3d model, royalty free license available, instant download after purchase.
cg_studio
$39
DJI Inspire1 quadcopter3d model
...3d model
cgstudio
.max .obj - dji inspire1 quadcopter 3d model, royalty free license available, instant download after purchase.
3d_ocean
$39
DJI Inspire 1 quadcopter
...rtexcount: 270883 the model comes in the following formats: -max 2012 -obj (no materials), exported with blender preset includ...
Clone
3d_export
$5
Clones great republic
...clones great republic
3dexport
clones great republic.those same clones from the star wars movie universe.4 clones available.
3d_export
$10
Clone 3D Model
...clone 3d model
3dexport
clone woman girl female lady chamber sci fi
clone 3d model calcm1 51695 3dexport
turbosquid
$5
Clone machine
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
archive3d
free
Clone trooper 3D Model
...nd army soldier trooper
clone trooper 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
free
Lego Clone Walker
...ree 3d model lego sw clone walker for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1292252)
turbosquid
$15
Clone trooper helmet
...d model clone trooper helmet for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1199355)
archive3d
free
Clone trooper 3D Model
...and army soldier trooper
clonetrooper 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archive3d
free
Clone trooper 3D Model
...and army soldier trooper
clonetrooper 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_ocean
$35
Surface Clone C4D materials
...+ of the most well made materials for maxon’s cinema 4d; on the internet today. each material is crafted with a specific purpo...
turbosquid
$3
Sci-fi cloning vats
...cloning vats for download as 3ds, obj, wrl, x, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1290168)