Thingiverse
DJI Inspire 1 Heater Block by stageone
by Thingiverse
Last crawled date: 3 years ago
I first would like to thank the creator of the GoPro mounting system for the design inspiration. Without it I would have spent far longer on trying to figure out the dimensions. Living in a cold winter climate can often shelve days of flying due to low temperatures. LiPo batteries are suseptible to reduced performance when cold. DJI does offer battery heaters for preflight and insulator pads. I thought there must be a way to add active heat to create a blanket of sorts for the DJI Inspire 1. The idea was to use glove warmers which are inexpensive and not environmentally harmful or a fire hazard. The system locks in place over the battery and radiates heat to help improve performance on cold weather days. The glove warmers will radiate maximum heat for 1-2 hours and will keep producing heat for up to 10 hours. All for $1 or less.
A 2mm hole was included in the design to allow for the placement of locking pins if required.
I will plan some test flight video and results.
UPDATE: Ran the first flight. Outside temperature is -6 with a windchill of -13. So a bit warm for this sort of test. However results seemed positive. No adverse effects on the flight. Ran the battery from 95% to 47% in gusty winds. Battery temperature hit 38.2C before my hands were icicles. I know the operating temperatures listed by DJI is max 40C however I'm not convinced the battery was at that temperature. Rather the block heaters were close enough to the temperature sensor to throw it off. The surface temperature of the battery was still just mildly warm. Not near the 38.2C I recorded.
UPDATE 2: Another thought for this design is to place some sort of an insulation (i.e. foam) into the cavities and fly without active heating. insulating a pre warmed battery should be sufficient in most cases. I'll be testing this idea out soon.
UPDATE 3: I've used this heater now on 3 separate flights without having issues. The battery temperature during my tests at windchills as low as -21C was between 22C and 38.2C.
A 2mm hole was included in the design to allow for the placement of locking pins if required.
I will plan some test flight video and results.
UPDATE: Ran the first flight. Outside temperature is -6 with a windchill of -13. So a bit warm for this sort of test. However results seemed positive. No adverse effects on the flight. Ran the battery from 95% to 47% in gusty winds. Battery temperature hit 38.2C before my hands were icicles. I know the operating temperatures listed by DJI is max 40C however I'm not convinced the battery was at that temperature. Rather the block heaters were close enough to the temperature sensor to throw it off. The surface temperature of the battery was still just mildly warm. Not near the 38.2C I recorded.
UPDATE 2: Another thought for this design is to place some sort of an insulation (i.e. foam) into the cavities and fly without active heating. insulating a pre warmed battery should be sufficient in most cases. I'll be testing this idea out soon.
UPDATE 3: I've used this heater now on 3 separate flights without having issues. The battery temperature during my tests at windchills as low as -21C was between 22C and 38.2C.
Similar models
3d_ocean
$6
Low Profile Radiator
...low profile radiator
3docean
heat heater hot pipe radiator temperature thermostat warm
a low profile version of the radiator
3d_ocean
$5
Radiator
...high quality 3d model of radiator/heater. files included: .max file with vray shaders, .obj file. vray mat library also included.
cg_trader
free
Old Vintage Radiator
...extures are included; white texture is procedural. radiator heater warm heating old antique heat retro temperature interior other
3d_export
$6
Heater 3D Model
...ater 3d model
3dexport
heater radiator heating firing warmer metal white living room home
heater 3d model school73 90555 3dexport
3dwarehouse
free
NAMELESS bathroom heater
...house
#bathroom #grzejnik #heater #kaloryfer #radiator #warmer #łazienka #łazienkowy, warmer, radiator, convector, fire, brazier
grabcad
free
DJI Inspire 2 - TB50 Intelligent Flight Battery
...dji inspire 2 - tb50 intelligent flight battery
grabcad
https://store.dji.com/product/inspire-2-intelligent-flight-battery
cg_trader
free
3D Radiator Heater
...er
cg trader
3d radiator free model radiator heater heating home house interior warm house interior home interior house interior
3d_ocean
$5
Radiator Heater
...ed radiator/heater for modern houses. the .ma includes materials for arnold render and is well organized in groups and subgroups.
thingiverse
free
DJI inspire battery cover with heater pouches by jaymiejames
...ere is some support material that needs to be removed once printed, it comes out easily it just difficult to see as it blends in.
thingiverse
free
Enclosure addon Honeywell Heater HCE100XE / HCE100BE4 mounting clamp by Snafky
... need active cooling to not let the temperature to high.
happy printer!!
see here how it clamps one!
https://youtu.be/dxm1k0y1n4i
Stageone
thingiverse
free
WD MyBook Wall Mount by stageone
...mybook wall mount by stageone
thingiverse
simple wall mount for the western digital mybook. print two and mount using #8 screws.
thingiverse
free
Reusable Flosser by stageone
...first design attempt. if you print and use one please let me know how it worked and if you have some suggestions for improvement.
thingiverse
free
Arlo Pro 45* Mount by stageone
...e i needed to achieve would not work with the included mounts. this adds an extra 45 degrees to allow for improved camera angles.
thingiverse
free
Descent Card Book Box (Sleeved) by stageone
...ned to look like a book. sleeved cards will display class and look great printed in the class colors. a divider is also included.
thingiverse
free
Ciclop 3D scanner plate by stageone
...on the sides to refine the look of the turntable.
it is yet untested using calibration as i am still in the middle of the build.
thingiverse
free
Starlink Accessories by stageone
...th plugging the hole. i would suggest that weather proof caulk should also be applied at the perimeter to help keep out moisture.
thingiverse
free
MacBook Air (2017) Wall Mount by stageone
...eed to keep your macbook air safely mounted on the wall. the slot is 21mm wide so may accommodate more types of laptop computers.
thingiverse
free
Ghostly Automata Sound Wave by stageone
...015. this was desgned before i had a 3d printer. i have never printed it and expect that most of the parts need to be redesigned.
thingiverse
free
Merkur 23C travel case by stageone
...new case to accommodate. it will allow for storage of extra blades and the razor. it also has a built in stand while on the road.
thingiverse
free
X-Wing Proximity Bomb (UPDATED) by stageone
...hin 0.1mm. update: made a change to the piece to better match cardboard cutout. also removed to antenna fo a better print result.
Dji
3ddd
free
Подвес DJI Zenmuse
... подвес
подвес dji zenmuse z15-5d для canon 5d mark ii/iiihttp://www.rcteam.ru/dji/zenmuse-z15-5d.html
3ddd
$1
шасси для рамы DJI S800
...еся шасси для рамы dji s800
dji s800 retractable landing skidhttp://www.rcteam.ru/dji/s800-retracting-landing-gear.html
3ddd
$1
DJI Phantom 2
... dji
450000 polys
швы корпуса могут показаться ошибкой моделинга, но это не совсем так!)
3d_ocean
$39
DJI Phantom3 Professional
...540 highly detailed model of the dji phantom3 professional quadcopter. the model is very highpoly (collapsed meshes, no modifi...
turbosquid
$1
dji osmo pocket
...
royalty free 3d model dji osmo pocket for download as blend on turbosquid: 3d models for games, architecture, videos. (1613550)
turbosquid
$98
DJI Inspire 1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
DJI Charging hub
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
cg_studio
$39
DJI Phantom3 Professional3d model
... model
cgstudio
.max .obj - dji phantom3 professional 3d model, royalty free license available, instant download after purchase.
cg_studio
$39
DJI Inspire1 quadcopter3d model
...3d model
cgstudio
.max .obj - dji inspire1 quadcopter 3d model, royalty free license available, instant download after purchase.
3d_ocean
$39
DJI Inspire 1 quadcopter
...rtexcount: 270883 the model comes in the following formats: -max 2012 -obj (no materials), exported with blender preset includ...
Heater
archibase_planet
free
Heater
... gas water heater
heater ariston gi7s 11l ffi ng gas water heater n160815 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
heater
...heater
3dexport
heater 3d modelling.
3d_export
$5
heater
...heater
3dexport
simple room heater
archibase_planet
free
Heater
...ater water heater hot-water generator
heater thermex if 80 v tank n290114 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$20
Heater
...
turbosquid
royalty free 3d model heater for download as c4d on turbosquid: 3d models for games, architecture, videos. (1145030)
turbosquid
$25
Heater
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$24
Heater
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
heaters
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
heater
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
heater
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Inspire
turbosquid
$10
Inspiration?
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
INSPIRATION tecni nova
... tecni , письменный
моделился по каталогу inspiration tecni nova.
3ddd
$1
Inspire Christina Aguilera
...inspire christina aguilera
3ddd
парфюм
inspire christina aguilera
3d_export
$15
Starkiller Inspired Lightsaber
...starkiller inspired lightsaber
3dexport
this lightsaber is inspired by starkiller's lightsaber
3ddd
$1
Creative Inspire T6160
...creative inspire t6160
3ddd
колонка
колонки 5.1 creative inspire t6160
polys: 912452
verts: 475911
3d_export
$15
razer inspired keyboard
...xport
i made this highly detailed keyboard inspired by the . it's high poly, highly detailed. available for commercial use.
turbosquid
$39
Maul inspired lightsaber
... model maul inspired lightsaber for download as blend and obj on turbosquid: 3d models for games, architecture, videos. (1630272)
turbosquid
$499
Pretty Lady Inspiration
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$249
Anime Inspired Male
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$98
DJI Inspire 1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Block
archibase_planet
free
Blocks
...blocks
archibase planet
blocks bricks toy
toy blocks - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
Block
...block
3dexport
3d_export
$10
The guillotine and the block
...the guillotine and the block
3dexport
the guillotine and the block autocad 2013
3d_ocean
$8
Concrete Blocks
... blocks, barriers or cover for characters during a fire fight. each one has its own diffuse map, specular and normal map in tg...
archibase_planet
free
Glass block
...glass block
archibase planet
glass block brick
glass block n211009 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$99
city block
...city block
3dexport
city block 3d model. include max, obj and fbx files.
3d_ocean
$3
Concrete Blocks Textures
...res
3docean
block blocks concrete seamless wall walls
a couple of seamless textures with two differents sizes of concrete blocks.
3d_export
$5
plummer block
...plummer block
3dexport
this is an 3d model of plummer block assembly where seven parts are required to assemble this.
design_connected
$16
Block 2
...block 2
designconnected
henry pilcher block 2 computer generated 3d model. designed by pilcher, henry.
3d_export
$7
concrete blocks on pallets
...concrete blocks on pallets
3dexport
concrete blocks on pallets, 3 types of blocks. there are all the necessary textures.
1
turbosquid
$69
armchairs(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
ring 1+1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
chair(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
Chair(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
RING 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
house 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Table 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$59
Formula 1(1)
...lty free 3d model formula 1 for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1567088)
design_connected
$11
No 1
...no 1
designconnected
sibast no 1 computer generated 3d model. designed by sibast, helge.
turbosquid
$2
desert house(1)(1)
...3d model desert house(1)(1) for download as 3ds, max, and obj on turbosquid: 3d models for games, architecture, videos. (1055095)