DJI ANALOG MOD (uruav mod with rapidfire)

Last crawled date: 4 years, 2 months ago

you need:
Hard/strong glue (5min epoxy etc)
gopro mount screw and nut.
the smallest mount with the tiny lip mounts to the goggle permanently
Epoxy or glue the other mount part to the back of the module (made a tiny slot for it)
i did not add it to the design because it would need a lot of support to print with that thing sticking out under.
on my first version the front cover did not click properly into the slot so I made it a little bit deeper. have not tried it yet so if someone prints it let me know if it works or not.
(i used a tiny blob of hot glue to keep the cover closed and it works well, i will probably keep it closed from now on)
I also added 2 layers of dubble sided foam tape on top of the dc ports on the uruav mod to make the rapidfire level and without bending the pins when you use it. so that the rapidfire and the uruav mod become "one part" (see image)
I made a tiny extension for ground station use. just mount it to a gopro mount and the module will have the correct orientation.