DIY Secure Servo Connector from Header Pins by lloo

Last crawled date: 4 years, 7 months ago

If you have header pins you can print this object to make DIY secure servo connectors. Once made standard servo connectors shout fit quite well and not come apart on their own. To assemble them you need to first solder your wires to the header pins, then you may have to sand the plastic part of the header pin to make it fit properly. Once it fits nicely use a drop of super glue to make a strong bond. I used shrink wrap to cover the exposed solder joints but you could also use hot glue or a bit of electrical tape.
I included the 123D Design file in case someone wants to modify it for themselves.