Thingiverse
DIY PrintRite Cable Chain Setup by 1sPiRe
by Thingiverse
Last crawled date: 4 years, 8 months ago
Here is my setup for the cable chain on my DIY PrintRite.
The Z to Y holder is made to be fixed on this.
To make this you will need 4 or 7 5mm steel balls, oil, 2 M3*8 screws (hex socket wished), and a few zip tie.
The Z to Y holder is made to be fixed on this.
To make this you will need 4 or 7 5mm steel balls, oil, 2 M3*8 screws (hex socket wished), and a few zip tie.