Thingiverse
Diversity Nano RX 30x30 mount
by Thingiverse
Last crawled date: 5 years, 10 months ago
A 30x30 mount designed to fit a diversity nano rx. The rx is likely to fit and stay in place on it's own, but there is also a fitting for a zip tie to secure the rx firmly. This has been tested for the fit, but has not been tested in flight yet. Waiting for the fc and esc for this build right now.
This needs to be printed in tpu or another flexible filament since the top is designed to be smaller than the diversity rx. It needs to be bent in order for it to fit.
This was originally adapted from a rear mount for an IFlight DC5 made here: https://www.thingiverse.com/thing:4137136/
This needs to be printed in tpu or another flexible filament since the top is designed to be smaller than the diversity rx. It needs to be bent in order for it to fit.
This was originally adapted from a rear mount for an IFlight DC5 made here: https://www.thingiverse.com/thing:4137136/