Thingiverse
Display stand for your printed model by juergen54
by Thingiverse
Last crawled date: 4 years ago
Display stands for your printed models.
I designed different sizes.
All display stands have a total height of 4 mm.
The upper frame has an height of 1 mm. So you can paint or mould the inner surface area.
I use fine sand and wallpaper paste. After drying the surface can be painted.
Update 26.12.2017
I added 2 new display stands with cobblestone surface
Display stand 80 x 40 mm cobblestone
Display stand 100 x 60 mm cobblestone
Update 28.12.2017
Name plate 30 mm
Name plate 40 mm
Name plate 50 mm
Name plate 60 mm
Select a name plate. Print it face down to the printbed. Glue it at the display stand.
I designed different sizes.
All display stands have a total height of 4 mm.
The upper frame has an height of 1 mm. So you can paint or mould the inner surface area.
I use fine sand and wallpaper paste. After drying the surface can be painted.
Update 26.12.2017
I added 2 new display stands with cobblestone surface
Display stand 80 x 40 mm cobblestone
Display stand 100 x 60 mm cobblestone
Update 28.12.2017
Name plate 30 mm
Name plate 40 mm
Name plate 50 mm
Name plate 60 mm
Select a name plate. Print it face down to the printbed. Glue it at the display stand.