Thingiverse
direct drive knob
by Thingiverse
Last crawled date: 5 years, 3 months ago
this filament primer knob for direct drive
Fits on to motor shaft, but u may need to drill out collar to fit tight or glue on.
100% infill on both prints.
glue both wheel and collar together, use a 5mm bolt to line up both. as in picture
works great on micro-swiss direct drive upgrade retraction 2.5 at 25 speed
made pictures of it
Fits on to motor shaft, but u may need to drill out collar to fit tight or glue on.
100% infill on both prints.
glue both wheel and collar together, use a 5mm bolt to line up both. as in picture
works great on micro-swiss direct drive upgrade retraction 2.5 at 25 speed
made pictures of it