Direct Drive by Troldtoft

Last crawled date: 3 years ago

I designed this direct drive, hot-end, radial fan and z-induction sensor holder to better print flexible materials. As a side note I also installed a special cable system for my Prusa i3 Steel which can be added (I will attach a link later on).
The holder is made for E3Dv6.
Can be used with nema17 42 mm or smaller
All marks for nuts are designed for M3, but are a bit too small. The reason is that the nut should be heated and pressed into the prepared hole. This embeds the nut without having to attach them from behind, making disassembling easier.
The holder is designed to be easily removable. I will upload a video later, when I'm done testing.
I'm designing a fan for the system, but this is still in the alpha phase. Link will be added.
If you need any additional holes or modification let me know and I might add them. The original file is also added for your convenience.
Please throw a picture in the comment section if you want to, I would love to see it working elsewhere. :)
Enjoy!