DIN Rail support to mount breakers to rack mount panel by AmpEater

Last crawled date: 5 years, 8 months ago

This part allows for a section of DIN rail to be mounted to a flat surface with an offset. I designed it to hold approx 10 solar DC circuit breakers in a rack mount install, along with 1x 125A outback solar main disconnect. The offset from the surface is appropriate for the common solar DIN breakers. A minimum of a 3U panel is required.
There is 6 inches between the supports, approx 7inches of DIN rail will be needed. Rail is mounted with 2x 5mm screws and 2x 5mm square nuts (8mm edge measurements, 3.6mm height)