Thingiverse
Dihedral tilt top for RCExplorer Tricopter V3 (5 degrees) by Motorpixiegimbals
by Thingiverse
Last crawled date: 3 years, 1 month ago
Dihedral tilt top for the RCExplorer tricopter V3. Experimental!
For use when cutting the arms in half and building a mini tricopter.
Derivative of David Windeståls excellent work. Get the frame and necessary servo at http://www.rcexplorer.se/shop.
Use M3x35 hex and a washer for the tilt mechanism (original was M3x40)
(For the servo horn version, use M3 locknut and M3x30 hex screw)
Use M3x20 hex screws for the front legs.
Use two M3x6 hex screws for the tilt.
Use two M3x20 for the rear leg
Use two M3 locknuts for the tilt bottom
Two kinds: NTM style hole pattern and Elite style hole pattern (rotated 90 degrees) Hole spacing 19mm.
I did a small test of the functionality of the dihedral tilt mechanism here: http://youtu.be/oGvY1ehM_Vs
Buy the original tilt mechanism from RCExplorer.se (http://rcexplorer.se/product/tricopter-tilt-mechanism-3d-printed/) or download the STLs: http://rcexplorer.se/downloads/
For use when cutting the arms in half and building a mini tricopter.
Derivative of David Windeståls excellent work. Get the frame and necessary servo at http://www.rcexplorer.se/shop.
Use M3x35 hex and a washer for the tilt mechanism (original was M3x40)
(For the servo horn version, use M3 locknut and M3x30 hex screw)
Use M3x20 hex screws for the front legs.
Use two M3x6 hex screws for the tilt.
Use two M3x20 for the rear leg
Use two M3 locknuts for the tilt bottom
Two kinds: NTM style hole pattern and Elite style hole pattern (rotated 90 degrees) Hole spacing 19mm.
I did a small test of the functionality of the dihedral tilt mechanism here: http://youtu.be/oGvY1ehM_Vs
Buy the original tilt mechanism from RCExplorer.se (http://rcexplorer.se/product/tricopter-tilt-mechanism-3d-printed/) or download the STLs: http://rcexplorer.se/downloads/
Similar models
thingiverse
free
Bigger tilt mechanism for RCExplorer Tricopter V3 (up to 42mm can) by Motorpixiegimbals
...
david even has provided the original design as free download: http://rcexplorer.se/wp-content/uploads/2014/08/tilt-mechanism.zip
thingiverse
free
RCExplorer racing canopy for V3, V3.5 and mini tricopter by Motorpixiegimbals
...vailable at rcexplorer.se/shop.
board camera tilt is -5 to 45 degrees. mobius/runcam/gopro session plate tilt is 0 to 30 degrees.
thingiverse
free
RCExplorer Bicopter impossible tilt pack by Motorpixiegimbals
...t mechanisms, double that :-)
use petg or abs/asa for the motor part, forabs/asa scale the part to 101% to account for shrinkage.
thingiverse
free
Custom canopy for RCExplorer V3 and mini tricopter by Motorpixiegimbals
...allows you to mount a mobius style camera (up to 38mm wide) and tilt it 0 to 40 degrees.
integrated gopro mount on the top plate.
thingiverse
free
Low Poly Canopy RCexplorer V3 Tricopter by Temp1337
...mp1337
thingiverse
low poly canopy for tricopter v3.
could be mountet by zip ties or extend the leg screws and insert locknut.
thingiverse
free
RCExplorer V3 inspired tricopter mini (295mm wheelbase) by Motorpixiegimbals
...how to assemble a tricopter from the king of tricopters! http://youtu.be/kvzga6djqjs
sample footage:http://youtu.be/ogvy1ehm_vs
thingiverse
free
RCExplorer Mini Tricopter Landing gear / leg by vsemaphore
...hore
thingiverse
small landing gear/leg designed for rcexplorer mini tricopter (http://rcexplorer.se/product/minitricopter-kit/)
thingiverse
free
Impossible tilt - BabyTri edition by Motorpixiegimbals
...nter the servo and calibrate 40 degrees to either side.
https://rcexplorer.se/product/babytricopter-kit-with-f3fc-racing-and-pdb/
thingiverse
free
rcexplorer tricopter body by ennui2342
...i2342
thingiverse
this is a design for rcexplorer's tricopter v2.5 http://rcexplorer.se/projects/2011/09/the-tricopter-v2-5/
thingiverse
free
Canopy for RCExplorer Tricopter V3 (50mm nose) by Motorpixiegimbals
...pport.
works best with hex screws at the boom fold. use antenna boom for securing it at the front, barbecue skewer at the back.
Rcexplorer
thingiverse
free
rcexplorer tricopter body by ennui2342
...i2342
thingiverse
this is a design for rcexplorer's tricopter v2.5 http://rcexplorer.se/projects/2011/09/the-tricopter-v2-5/
thingiverse
free
RCExplorer tricopter - RX mount by resokk
...rcexplorer tricopter - rx mount by resokk
thingiverse
mount for rx
thingiverse
free
Rcexplorer TricopterV4 FPV Cam mount by oxivanisher
...isher
thingiverse
rcexplorer tricopterv4 fpv cam mount for standard runcam sky+ like cameras.
print this object twice to use it.
thingiverse
free
Rcexplorer Tricopter V4 TBS Unify Antenna mount by oxivanisher
...rcexplorer tricopter v4 tbs unify antenna mount by oxivanisher
thingiverse
rcexplorer tricopter v4 tbs unify antenna mount
thingiverse
free
RcExplorer Tricopter-LR feet
...rcexplorer tricopter-lr feet
thingiverse
tricopter-lr feet for 6mm arms. may be compatible with the original 5mm one
thingiverse
free
RCExplorer Mini Tricopter Landing gear / leg by vsemaphore
...hore
thingiverse
small landing gear/leg designed for rcexplorer mini tricopter (http://rcexplorer.se/product/minitricopter-kit/)
thingiverse
free
RCExplorer V4 front spacer by Motorpixiegimbals
...duct/f3fc-tricopter-frame-with-integrated-power-distribution/)
and optional modified spacer for 3mm screw inserts (custom canopy)
thingiverse
free
RunCam SKYPLUS/PZ0420M mount for RCExplorer Tricopter V3 by Motorpixiegimbals
...motorpixiegimbals
thingiverse
modified nose spacer for the rcexplorer tricopter v3 to mount runcam skyplus/pz0420m board camera.
thingiverse
free
RCExplorer - front spacer by resokk
...lorer - front spacer by resokk
thingiverse
custom front spacer:
lock rx antenna zip ties
camera mount
holes (back side) for baro
thingiverse
free
RCExplorer tricopter - short legs by resokk
...rcexplorer tricopter - short legs by resokk
thingiverse
short version of legs for tricopter (10mm booms) - about 50 mm.
Motorpixiegimbals
thingiverse
free
Lid (60mm) by Motorpixiegimbals
...lid (60mm) by motorpixiegimbals
thingiverse
lid that fits a 60x5mm hole, with retaining tabs.
thingiverse
free
Airport Express wall mount by Motorpixiegimbals
...airport express wall mount by motorpixiegimbals
thingiverse
wall mount for apple airport express
thingiverse
free
KK2 mini enclosure by Motorpixiegimbals
... mini enclosure by motorpixiegimbals
thingiverse
enclosure for the kk2 mini flight controller. weight: less than 8g (solid abs).
thingiverse
free
Xiaomi Yi - The Frame by Motorpixiegimbals
...i yi - the frame by motorpixiegimbals
thingiverse
super light (less than 10g) gopro style frame for the xiaomi yi action camera.
thingiverse
free
Sony Rx100 centering adapter by Motorpixiegimbals
...ny rx100 centering adapter by motorpixiegimbals
thingiverse
adapter for centering the mounting hole on sony rx100 style cameras.
thingiverse
free
Taranis gimbal protector by Motorpixiegimbals
...ector by motorpixiegimbals
thingiverse
couldn't find a frsky taranis gimbal protector that i liked, so i created one myself.
thingiverse
free
Xiaomi Yi - The FPV Frame by Motorpixiegimbals
...fpv frame by motorpixiegimbals
thingiverse
gopro style frame for the xiaomi yi action camera with some level of lens protection.
thingiverse
free
FT Arrow hard nose by Motorpixiegimbals
...hard nose by motorpixiegimbals
thingiverse
hard nose for the ft arrow. can be mounted on top of the existing nose if so desired.
thingiverse
free
RC plane 65mm wheel by Motorpixiegimbals
...rc plane 65mm wheel by motorpixiegimbals
thingiverse
wheel for r/c air plane, diameter 65mm width 25mm. shaft 3mm.
thingiverse
free
KitchenAid blender lid by Motorpixiegimbals
...ddle part of a kitchenaid blender lid. original got brittle after 5 years... print it solid, to avoid water from entering infill.
Dihedral
thingiverse
free
dihedral mount 4degrees by Ranger2
... carbonfiber mount with two 3mm holes it has a 4 degree angle on the mount for those of you who want to try a dihedral quadcopter
thingiverse
free
Folded Dihedral Torus 1 by wwebber
...nt and there are 6 at each vertex. the symmetry group of this is a dihedral group since the top looks different from the bottom.
thingiverse
free
Dihedral 180 mini skull quad by Ranger2
...ese angled arms - wondering if these would work as a miniquad with dihedral motor mount props. will require longer motor screws.
thingiverse
free
Airplane Dihedral Wing by theroar
... my good friends at target, i now have lovely wings. =) the balance is not good so it does not fly, but i think it has potential.
thingiverse
free
Kite Dihedral by mototrev
...in the slicer program (cura)
however your results might vary.
to make large fittings the % can be increased in the slicer program
thingiverse
free
Wedges to add dihedral to multirotors
...tor mount holes in the arms slightly larger to accommodate the fact that the screws will be going through them at a slight angle.
thingiverse
free
Hoverthings Flip dihedral motor mount and landing feet by BluefishNZ
...se the standard legs.
build log with these used is herehttp://www.bluefish.net.nz/2015/02/flip-sport-build-for-acro-flying.html
thingiverse
free
Lijadora de ángulos de diedros de alas de aeromodelismo - sander wing dihedral angles by nodoingenieria
...en pla a 60 mm/sec pico de 0.8, 0.28 de capa a 10% de infill.
complemento para el pegado http://www.thingiverse.com/thing:1802190
thingiverse
free
Penta Tubes by DaveMakesStuff
...surfaces of the “dihedral tube” are derived from the dihedral angle of the dodecahedron, that is, the angle between...
Tricopter
3d_export
$5
Moon copter 3D Model
...model 3dexport spaceship mooncopter tricopter aircraft drone helicopter robot rctricopter moon copter 3d model manu.kvs16051 93671...
3dbaza
$7
Tricopter (346642)
...tricopter (346642)
3dbaza
tricopter 3d model
thingiverse
free
tricopter parts by miketulen123
...tricopter parts by miketulen123
thingiverse
tricopter parts
thingiverse
free
Tricopter by outcastrc
...tricopter by outcastrc
thingiverse
tricopter design
uses 1/2" wood spars, and assorted 3mm hardware.
thingiverse
free
Delta Tricopter by zdar
...delta tricopter by zdar
thingiverse
a delta style tricopter.
thingiverse
free
Tricopter Prototype by brentd
...tricopter prototype by brentd
thingiverse
mini tricopter prototype
thingiverse
free
Tricopter Yaw by 2Mars
...mm rods, suitable as a tail joint.
(based on tricopter rcexplorer.se http://rcexplorer.se/projects/2011/09/the-tricopter-v2-5/)
thingiverse
free
tricopter base by gpatel522
...tricopter base by gpatel522
thingiverse
tricopter base for anyone to use. no commercial use.
thingiverse
free
Tricopter V2.5 by Crazyinventor
...tricopter v2.5 by crazyinventor
thingiverse
these are the printed parts that go to my tricopter v2.5.
thingiverse
free
Tricopter Hook by Lowfiero
...tricopter hook by lowfiero
thingiverse
just a quick wall hook for my batbone tricopter.
Tilt
3ddd
free
TILT
...tilt
3ddd
tilt
http://www.graypants.com
tilt
gp-133 -size: o: 46cm | h: 35cm.
3ddd
$1
TILT
...tilt
3ddd
kenneth cobonpue
http://www.kennethcobonpue.com/collection/view/44/tilt
design_connected
$9
Tilt
...signconnected
photo-realistic 3d models of the tilt shelves from bonaldo for 3d architectural and interior design presentations.
turbosquid
$7
Tilt
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Urban electric Tilt
...urban electric tilt
3ddd
urban electric , tilt
urban electric tilt
design_connected
free
Tilt 70
...tilt 70
designconnected
free 3d model of tilt 70 by nc möbler designed by andersson, peter.
3d_export
$5
tilt door knob
...tilt door knob
3dexport
tilt door knob
turbosquid
$65
Tilt scale
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
Tilted Cross
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
tilt shape door knob
...tilt shape door knob
3dexport
tilt shape door knob
V3
3d_export
$5
Poison-v3
...poison-v3
3dexport
poison-v3
3ddd
$1
Curtain v3
...curtain v3
3ddd
полупрозрачная штора v3
turbosquid
free
v3
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
potato v3
...potato v3
3dexport
turbosquid
$69
Skeletor v3
...royalty free 3d model skeletor v3 for download as ztl and obj on turbosquid: 3d models for games, architecture, videos. (1712713)
turbosquid
$49
Zombie v3
...
royalty free 3d model zombie v3 for download as obj and ztl on turbosquid: 3d models for games, architecture, videos. (1342458)
turbosquid
$2
Bitcoin v3
...
royalty free 3d model bitcoin v3 for download as c4d and prj on turbosquid: 3d models for games, architecture, videos. (1182845)
turbosquid
$29
Turret V3
...alty free 3d model turret v3 for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1217498)
turbosquid
$20
Radiators v3
... free 3d model radiators v3 for download as max, max, and obj on turbosquid: 3d models for games, architecture, videos. (1607437)
turbosquid
$10
Wheel V3S
...e 3d model wheel v3s for download as 3ds, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1344250)
Degrees
design_connected
$13
Degree
...degree
designconnected
kristalia degree computer generated 3d model. designed by norguet, patrick.
3ddd
$1
Kristalia Degree
... kristalia , круглый
http://degree.kristalia.it/
turbosquid
$2
Degree Brace 4
...el degree brace 4 for download as 3ds, max, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1205705)
turbosquid
$1
Degree Brace 3
...el degree brace 3 for download as 3ds, max, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1205719)
turbosquid
$1
Degree Brace 2
...el degree brace 2 for download as 3ds, max, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1205714)
turbosquid
$1
Degree Brace 1
...el degree brace 1 for download as 3ds, max, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1205710)
design_connected
$13
30 Degrees Pendant L
...30 degrees pendant l
designconnected
hay 30 degrees pendant l computer generated 3d model. designed by van hengel, johan.
turbosquid
free
30 degrees Tridimensional grid
...free 3d model 30 degrees tridimensional grid for download as on turbosquid: 3d models for games, architecture, videos. (1383401)
turbosquid
$27
45 Degree Pipe Connection
...e connection for download as c4d, 3ds, stl, obj, wrl, and fbx on turbosquid: 3d models for games, architecture, videos. (1687847)
turbosquid
$8
Norway flag on 25 degree pole
...ee 3d model norway flag on 25 degree pole for download as c4d on turbosquid: 3d models for games, architecture, videos. (1158107)
Top
archibase_planet
free
Top
...top
archibase planet
top
top - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3ddd
free
Range Top V36C top
...range top v36c top
3ddd
гриль
проф. гриль range top v36c top
archibase_planet
free
Top
...top
archibase planet
dresser kitchen furniture
top - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Top
...top
archibase planet
bracket bar furniture
bar top - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$5
Top
...lty free 3d model top for download as ma, max, blend, and obj on turbosquid: 3d models for games, architecture, videos. (1579951)
turbosquid
$39
Top
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
Top
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$15
top knifle
...top knifle
3dexport
top knifle
design_connected
$11
Drop Top
...drop top
designconnected
plumen drop top computer generated 3d model.
3d_export
$245
top of the material
...top of the material
3dexport
top of the material,commercial ceiling ceiling material, metal material
5
turbosquid
$6
Rock 5-5
...urbosquid
royalty free 3d model rock 5-5 for download as obj on turbosquid: 3d models for games, architecture, videos. (1639063)
3d_export
$5
hinge 5
...hinge 5
3dexport
hinge 5
turbosquid
$10
A-5
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
A-5
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
Calligraphic Digit 5 Number 5
...hic digit 5 number 5 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389333)
3ddd
$1
5 роз
...5 роз
3ddd
5 роз в стеклянной вазе
design_connected
$11
iPhone 5
...iphone 5
designconnected
apple iphone 5 computer generated 3d model.
3ddd
$1
Lola 5
...lola 5
3ddd
miniforms
lola 5 miniforms 300*65*134
3ddd
$1
Nexus 5
...dd
nexus , phone , телефон
google nexus 5 phone
3d_ocean
$15
iPhone 5
...iphone 5
3docean
3d 4d apple cinema iphone model modeling phone screen texture
iphone 5 3d model and texture realistic iphone 5.