Thingiverse

Digital Clock

by Thingiverse

Get from Thingiverse

Last crawled date: 4 years, 3 months ago

Before you connect anything, connect the Buck converter (LM2596S) to a 12v power supply and set the output voltage to exact 5.0 volts.
Print the face.stl file in white at 0.15 layer height.
The rest can be printed at 0.2 layer height.
Make sure when you put the LED'd on the plate that the directions of the LED is according to the layout.
I have used solid wire for connecting the LED's together with the printed plate ( led_plate_x_4) .
The clock dim as it darken so that the light does not bother you in the night. Still bright enough to read the clock.
2 Push buttons to set the Hours and minutes.
The software for the Uno is "corrie_clock.tex". Open with notepad, copy and past in arduino programmer.
Enjoy.

Tags

digital clock

Similar models

Astrology Zodiac For Septimus Clock by sully108

Astrology Zodiac For Septimus Clock by sully108

...then scale and print both "clock_face_tickmarks.stl" and "astro clock detail.stl" to half height each (1.5mm)

F1 Wheel for G920 - combined wheel plate by briangilbert

F1 Wheel for G920 - combined wheel plate by briangilbert

...om is below the bed, then set print height to 14.1mm when using 0.3mm layers for a clean top layer. i printed this at 25% infill.

Customizable Pixel Clock Display with Std. LEDs by JKDesign

Customizable Pixel Clock Display with Std. LEDs by JKDesign

... fit in a picture frame. optimized for single extruder 3d printer. print from led-mount up. add mounting spacers to fit in frame.

Tiny kitchen sink by Haku3D

Tiny kitchen sink by Haku3D

...bout 17 minutes. tip: if you're printing it in a silk pla filament, try upping the temperature to 240c to help its shininess.

Justin Bieber coaster - printed as one by gfursu

Justin Bieber coaster - printed as one by gfursu

...me, replace it with black, then switch back to white when it stops for the second time. as always, show me your makes, if ya will

Justin Bieber coaster - printed as one by gfursu

Justin Bieber coaster - printed as one by gfursu

...me, replace it with black, then switch back to white when it stops for the second time. as always, show me your makes, if ya will

Casetek blanking plates by AlpinerBergen

Casetek blanking plates by AlpinerBergen

...e for 3.5" expansion bays and to be printed with 100% fill, 3 shells, 0,1mm filament layer height, without raft or supports.

LED Diffuser Plate by RobertCL

LED Diffuser Plate by RobertCL

...he display is pretty much unreadable, with the diffuser its fairly easy to read. see this youtube video for a comparison video.

Freedom for catalan political prisoners yellow ribbon by GabiP

Freedom for catalan political prisoners yellow ribbon by GabiP

...uder and 60ºc the plate, as is really flat i'm sure that you can set the plate to 50 with no problems and save some energy :p

Simple 8x8 LED Matrix Light/Clock by Roboman444

Simple 8x8 LED Matrix Light/Clock by Roboman444

... optionally leave the inner brim for softly lit edge. base whatever settings you prefer, i used: layer height: 0.3mm infill: 30%

Search for 2040065 Similar models

Clock

Clock

...clock 3docean clock hand kitchen clock time watch a clock

archibase_planet

Clock

...clock archibase planet clock table clock alarm-clock clock orange - 3d model (*.gsm+*.3ds) for interior 3d visualization.

archibase_planet

Clock

...clock archibase planet clock table clock alarm-clock clock yellow - 3d model (*.gsm+*.3ds) for interior 3d visualization.

archibase_planet

Clock

...clock archibase planet clock alarm-clock clock n100707 - 3d model for interior 3d visualization.

archibase_planet

Clock

...clock archibase planet clock table clock clock - 3d model (*.gsm+*.3ds) for interior 3d visualization.

archibase_planet

Clock

...clock archibase planet clock striking clock clock - 3d model (*.gsm+*.3ds) for interior 3d visualization.

archibase_planet

Clock

...clock archibase planet clock wall clock clock 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.

archibase_planet

Clock

...clock archibase planet clock wall clock clock 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.

archibase_planet

Clock

...clock archibase planet clock wall clock clock 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.

archibase_planet

Clock

...clock archibase planet alarm clock alarm-clock clock - 3d model (*.gsm+*.3ds) for interior 3d visualization.

Search for 16907 Clock models

Digital

Digits

...available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and...

Digital piano

... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.

Digital Cameras

Digital Cameras

... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.

Digital Indicator

Digital Indicator

... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.

Digital Clock

... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.

Digital Printer

Digital Printer

... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.

Digital scales

... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.

Digital Durometer

Digital Durometer

... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.

Digital Scales

... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.

Digital 21

... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.

Search for 179788 Digital models