Thingiverse
Digi-Nerdy-Gurdy by XenonJohn
by Thingiverse
Last crawled date: 3 years ago
A few years ago I built a Nerdy Gurdy which is a hurdy gurdy made from laser cut panels and 3D printed parts. I then realised that an electronic MIDI keyboard emulating the keybox layout of a real HG would be useful for practice. I called it the DigiGurdy and that original version is on Thingiverse if you search for; DigiGurdy.
Since then the project has been through several design iterations. This new Digi-Nerdy-Gurdy version is made of laser cut ply panels and 3D printed parts, especially the keys. The keybox in particular has been designed in collaboration with Jaap Brand, designer of the Nerdy Gurdy, hence the change in name.
Short overview video:https://youtu.be/I4CbSvEB2fY
Background:
The hurdy-gurdy is an ancient musical instrument (10th century) with drones and melody strings bowed by a rotating wheel, played by pressing keys which contact them at different points. It has in more recent times featured in TV series such as “Black Sails” and “Walking Dead”. A major barrier for beginners is that they are very expensive, built to order with lead times of several months to a year and rather like bagpipes, they are noisy when practicing. For pipers, practice chanters and e-chanters are available to solve this issue while nothing similar is available for the hurdy-gurdy. The Digi-Gurdy and now this all laser-cut Digi[Nerdy]Gurdy with detachable keybox, are electronic devices, with correctly placed keys, that output MIDI via a USB cable to an attached or wirelessly paired phone or iPad running suitable MIDI player software, for practice anywhere using headphones, thus preventing eviction or divorce!
Main features of this new version are:
1) New PCB which places key stems in more correct positions when viewed from rear of keybox. This means key stems are no longer in centre of each key, therefore....
2) All new 3D designs for each key. As in a real hurdy gurdy the keys for higher notes are more complex as they overlap each other to some extent but must still not interfere with each other.
3) I tried a snap-into-place key design but stems do not look nice when viewed from rear. Therefore they have holes in ends of stems to take a 3mm diameter 6mm long bolt. Bolts screw straight in as holes just slightly undersize......see, I make life easy for you.
4) Keybox now is fully laser cut ply and glued together. However top panel is removable with 4 screws so a) you then have access to rear of PCB to make any repairs and b) you can make a more elaborate top panel should you wish later on.
5) Keybox is removable from soundbox, but will still fully function as a MIDI device emulating a hurdy gurdy (but without crank). This keybox will then fit into a bag should you wish to practice at work in lunchbreak or take it on holiday.
6) Keybox "docks" with a soundbox designed by Jaap Brand of Nerdy Gurdy fame, to create a proper gurdy shaped instrument with keys and crank in correct positions relative to your body. Crank is on end of soundbox. Special connector plug allows it to dock and undock easily.
7) Soundbox is much easier to construct than Nerdy Gurdy version as less curvaceous. This is a deliberate compromise to ensure easy buildability and almost no clamps are required when gluing it together.
8) MIDI sockets provided in keybox should you wish to use an aftermarket plug in MIDI Bluetooth dongle to transmit wirelessly to your paired iPad or phone. These are recessed now, to protect the dongle better.
9) Internal battery holder (a mobile phone emergency battery bank) is embedded in left hand end of the keybox. Should you wish to go fully wireless (i.e. when using a plug-in MIDI Bluetooth transmitter), the keybox can no longer draw power from the attached (via USB cable) phone or iPad and instead will now need its own power supply. Loop the short USB lead danging from left hand end of keybox around and plug it into this rechargeable battery module, and the keybox will now run on this internal power.
10) Four detailed build videos for the Digi[Nerdy]Gurdy are below. Also there are two setup and use videos showing how to navigate and use the tunings menu, how to connect to an iPad or Android phone, and also how to use the internal battery module should you wish to go wireless when using a plug-in MIDI Bluetooth transmitter dongle.
Build videos:https://youtu.be/24alM-BPFCUhttps://youtu.be/fJMO52L9p8shttps://youtu.be/V5a81HjGtzghttps://youtu.be/STn_R84A0JQ
Setup and use videos, tuning setup, pairing with iPad/Phone or Android phone:https://youtu.be/adyx8mwOBWkhttps://youtu.be/acmJpbKHEQg
Message me for more information such as PCB design, the soundfont file required for playback on the attached devices.
Additional information can also be found here:https://hackaday.io/project/165251-the-digi-gurdy-and-diginerdygurdy
Video clips of previous versions being played.
Nigel Eaton playing an early version:https://www.youtube.com/watch?v=oEdFkLzU7B8
A more recent DigiGurdy being played - the new DigiNerdyGurdy sounds the same as the one in this clip, tuning menu has since been improved:https://www.youtube.com/watch?v=EZzTbZ0fibg
Since then the project has been through several design iterations. This new Digi-Nerdy-Gurdy version is made of laser cut ply panels and 3D printed parts, especially the keys. The keybox in particular has been designed in collaboration with Jaap Brand, designer of the Nerdy Gurdy, hence the change in name.
Short overview video:https://youtu.be/I4CbSvEB2fY
Background:
The hurdy-gurdy is an ancient musical instrument (10th century) with drones and melody strings bowed by a rotating wheel, played by pressing keys which contact them at different points. It has in more recent times featured in TV series such as “Black Sails” and “Walking Dead”. A major barrier for beginners is that they are very expensive, built to order with lead times of several months to a year and rather like bagpipes, they are noisy when practicing. For pipers, practice chanters and e-chanters are available to solve this issue while nothing similar is available for the hurdy-gurdy. The Digi-Gurdy and now this all laser-cut Digi[Nerdy]Gurdy with detachable keybox, are electronic devices, with correctly placed keys, that output MIDI via a USB cable to an attached or wirelessly paired phone or iPad running suitable MIDI player software, for practice anywhere using headphones, thus preventing eviction or divorce!
Main features of this new version are:
1) New PCB which places key stems in more correct positions when viewed from rear of keybox. This means key stems are no longer in centre of each key, therefore....
2) All new 3D designs for each key. As in a real hurdy gurdy the keys for higher notes are more complex as they overlap each other to some extent but must still not interfere with each other.
3) I tried a snap-into-place key design but stems do not look nice when viewed from rear. Therefore they have holes in ends of stems to take a 3mm diameter 6mm long bolt. Bolts screw straight in as holes just slightly undersize......see, I make life easy for you.
4) Keybox now is fully laser cut ply and glued together. However top panel is removable with 4 screws so a) you then have access to rear of PCB to make any repairs and b) you can make a more elaborate top panel should you wish later on.
5) Keybox is removable from soundbox, but will still fully function as a MIDI device emulating a hurdy gurdy (but without crank). This keybox will then fit into a bag should you wish to practice at work in lunchbreak or take it on holiday.
6) Keybox "docks" with a soundbox designed by Jaap Brand of Nerdy Gurdy fame, to create a proper gurdy shaped instrument with keys and crank in correct positions relative to your body. Crank is on end of soundbox. Special connector plug allows it to dock and undock easily.
7) Soundbox is much easier to construct than Nerdy Gurdy version as less curvaceous. This is a deliberate compromise to ensure easy buildability and almost no clamps are required when gluing it together.
8) MIDI sockets provided in keybox should you wish to use an aftermarket plug in MIDI Bluetooth dongle to transmit wirelessly to your paired iPad or phone. These are recessed now, to protect the dongle better.
9) Internal battery holder (a mobile phone emergency battery bank) is embedded in left hand end of the keybox. Should you wish to go fully wireless (i.e. when using a plug-in MIDI Bluetooth transmitter), the keybox can no longer draw power from the attached (via USB cable) phone or iPad and instead will now need its own power supply. Loop the short USB lead danging from left hand end of keybox around and plug it into this rechargeable battery module, and the keybox will now run on this internal power.
10) Four detailed build videos for the Digi[Nerdy]Gurdy are below. Also there are two setup and use videos showing how to navigate and use the tunings menu, how to connect to an iPad or Android phone, and also how to use the internal battery module should you wish to go wireless when using a plug-in MIDI Bluetooth transmitter dongle.
Build videos:https://youtu.be/24alM-BPFCUhttps://youtu.be/fJMO52L9p8shttps://youtu.be/V5a81HjGtzghttps://youtu.be/STn_R84A0JQ
Setup and use videos, tuning setup, pairing with iPad/Phone or Android phone:https://youtu.be/adyx8mwOBWkhttps://youtu.be/acmJpbKHEQg
Message me for more information such as PCB design, the soundfont file required for playback on the attached devices.
Additional information can also be found here:https://hackaday.io/project/165251-the-digi-gurdy-and-diginerdygurdy
Video clips of previous versions being played.
Nigel Eaton playing an early version:https://www.youtube.com/watch?v=oEdFkLzU7B8
A more recent DigiGurdy being played - the new DigiNerdyGurdy sounds the same as the one in this clip, tuning menu has since been improved:https://www.youtube.com/watch?v=EZzTbZ0fibg
Similar models
thingiverse
free
String height adjustable bridge for Nerdy Gurdy by chrishornby
...ring action using a thumbwheel. original design by jaap brand.
the stls marked v6 are for earlier versions. the rest is for v 6.1
thingiverse
free
Nerdyharpa v2 by JaapBrand
...a guitar with a bow. the technology is very similar to the nerdy gurdy (http://www.nerdygurdy.nl), and it sounds awesome....
cg_trader
$19
Hurdy Gurdy Hieronymus Bosch
...hurdy gurdy, built after the hurdy gurdy in hieronymus bosch's paintings
medieval stringed instruments of bards and minstrels
grabcad
free
Hurdy gurdy key ring
...hurdy gurdy key ring
grabcad
traditional musical instrument french for 3d printed key ring
3dwarehouse
free
Hurdy-Gurdy Tangent
...hurdy-gurdy tangent
3dwarehouse
grabcad
free
Alto Hurdy Gurdy “Jiri” by Graeme McCormack
...tails on the actual hurdy gurdy can be seen at antiquated strings https://sites.google.com/site/mccormackgraeme/antiquatedstrings
thingiverse
free
Nerdy Gurdy v6.1 by JaapBrand
...nerdy gurdy v6.1 by jaapbrand
thingiverse
nerdy gurdy version 6.1
https://www.nerdygurdy.nl
3dwarehouse
free
Hurdy-Gurdy Keyox Template (Piezas de caja de teclas de una Zanfoña)
... caja de teclas de una zanfoña template of the pieces for create your own hurdy-gurdy #gurdy #hurdy #hurdygurdy #zanfona #zanfoña
thingiverse
free
Hurdy Gurdy tuning wrench by subix
...se
this is a tuning wrench for the "fähnchen" within my hurdy gurdy.
makes tuning the single tones much easier for me.
thingiverse
free
String anchor for a Nerdy Gurdy by verjigorm
...gurdy by verjigorm
thingiverse
string anchors for a nerdy gurdy, replacing the wire terminals that are part of the original kit.
Xenonjohn
thingiverse
free
Parts for syringe measuring device by XenonJohn
...curl up, the part will not work correctly. it depends on how well behaved your printer is when printing long parts horizontally.
thingiverse
free
FitBit clip on holder by XenonJohn
...gernails) and left to evaporate slightly until it forms a thick goo. using a cotton but i use it to glue the two halves together.
thingiverse
free
Peugeot 5008 Front Cup Holder by XenonJohn
...rn yourself, but that you may dare to have a sip of coffee while driving. situation now rectified, use at your own risk etc, etc.
thingiverse
free
PodBreakout to iPod Touch V4 rigid docking port by XenonJohn
...ouch into a socket at the other end so that it connects accurately with the plug and keeps the whole assembly securely connected.
thingiverse
free
Star Wars inspired Maz Kanata Glasses by XenonJohn
.... i trimmed down each half and used them to make the "lenses".
designed in google sketchup. skp and stl files attached.
Gurdy
thingiverse
free
Nerdy Gurdy v6.1 by JaapBrand
...nerdy gurdy v6.1 by jaapbrand
thingiverse
nerdy gurdy version 6.1
https://www.nerdygurdy.nl
thingiverse
free
String anchor for a Nerdy Gurdy by verjigorm
...gurdy by verjigorm
thingiverse
string anchors for a nerdy gurdy, replacing the wire terminals that are part of the original kit.
thingiverse
free
Hurdy Gurdy tuning wrench by subix
...se
this is a tuning wrench for the "fähnchen" within my hurdy gurdy.
makes tuning the single tones much easier for me.
thingiverse
free
Hurdy-Gurdy Fähnchen by subix
...t;fähnchen" are called in english, please let me know.
10mm
14mm
18mm
heights
print them the "pin" facing up"
thingiverse
free
Nerdy Gurdy Decorative String Holder by Flamingomtn
...ctors that are called for in the directions. depending on gauge of string, you may have to drill out the holes a little. enjoy.
thingiverse
free
String height adjustable bridge for Nerdy Gurdy by chrishornby
...ring action using a thumbwheel. original design by jaap brand.
the stls marked v6 are for earlier versions. the rest is for v 6.1
thingiverse
free
Nerdy Gurdy - V5 by JaapBrand
...arious small modifications to make it more accurate and robust
2019-04-28 released v6 (https://www.thingiverse.com/thing:3575109)
thingiverse
free
String height adjustable nut for Nerdy Gurdy by chrishornby
...string height adjustable nut for nerdy gurdy by chrishornby
thingiverse
need 2 m3 x10 studs (just cut from a bolt)
2 m3 bolts
thingiverse
free
Hurdy Gurdy (Sea of Thieves) by SirKristof
...mprovements! :d
pdf included for the 20 note punch paper! need help making more sea of thieves tunes of anyone is musicly minded!
Nerdy
thingiverse
free
Nerdy Gurdy v6.1 by JaapBrand
...nerdy gurdy v6.1 by jaapbrand
thingiverse
nerdy gurdy version 6.1
https://www.nerdygurdy.nl
thingiverse
free
Nerdy derby nose scoop by ITWorks
...nerdy derby nose scoop by itworks
thingiverse
nerdy derby nose scoop
thingiverse
free
Nerdy Derby Axle holder by ITWorks
...nerdy derby axle holder by itworks
thingiverse
axle holder for nerdy derby racer
thingiverse
free
nerdy derby wheel mesh by ITWorks
...nerdy derby wheel mesh by itworks
thingiverse
nerdy derby wheel mesh design
thingiverse
free
Nerdy Derby nose Owl by ITWorks
...nerdy derby nose owl by itworks
thingiverse
nose for nerdy derby racer with an owl theme
thingiverse
free
String anchor for a Nerdy Gurdy by verjigorm
...gurdy by verjigorm
thingiverse
string anchors for a nerdy gurdy, replacing the wire terminals that are part of the original kit.
thingiverse
free
Nerdy derby cockpit wedge design by ITWorks
...nerdy derby cockpit wedge design by itworks
thingiverse
nerdy derby cockpit wedge design
thingiverse
free
Nerdy derby cockpit dome design by ITWorks
...nerdy derby cockpit dome design by itworks
thingiverse
nerdy derby cockpit dome design
thingiverse
free
Nerdy derby nose tapered square by ITWorks
...nerdy derby nose tapered square by itworks
thingiverse
nerdy derby nose tapered square
thingiverse
free
Nerdy Derby rocket nozzle tail by ITWorks
...nerdy derby rocket nozzle tail by itworks
thingiverse
tail for nerdy derby racer with rocket nozzles
Digi
3dfindit
free
Digi+
...digi+
3dfind.it
catalog: hifiberry
3dfindit
free
Digi+ IO
...digi+ io
3dfind.it
catalog: hifiberry
unity_asset_store
$6
B2 Digi Container
... your workflow with the b2 digi container asset from xan studio. find this & other land options on the unity asset store.
thingiverse
free
Digi Bird Stand/Holder by noseydan
...digi bird stand/holder by noseydan
thingiverse
this is a simple stand to hold 4 digi birds at once.
thingiverse
free
Digi BQE PickPocket by Bull_S_FPV
...digi bqe pickpocket by bull_s_fpv
thingiverse
thingiverse
free
Digi-Egg of Reliability by birwin
...of the digi-egg of reliability from digimon adventure 2. this is just a single part and should be able to print with no supports.
thingiverse
free
Digi-Egg of Knowledge by birwin
...n of the digi-egg of knowledge from digimon adventure 2. this is just a single part and should be able to print with no supports.
thingiverse
free
Digi-Egg of Miracles by birwin
...sign of the digi-egg of miracles from digimon adventure 2. the split version functions as a box. it also includes a full version.
thingiverse
free
Digi Ninja by altais
...digi ninja by altais
thingiverse
for the hacker chess project! more info at http://hackerchess.com
thingiverse
free
Hifiberry Digi clone remix by waynethomas69
...remix by waynethomas69
thingiverse
remixed the top half of ultiarjan's case to work with cheap clones of the hifiberry digi.