Thingiverse
Detail paint brush set storage case box for golden maple brushes by Electricview
by Thingiverse
Last crawled date: 3 years ago
I know not a lot of people like to 'store' their brushes away, but this was a necessary evil for me as i do not have a house with a 'room' dedicated for painting, and I need to get my paint stuff 'out' every time i want to paint, and my brushes were just rolling around in my paint box. Also I have a cat who LOVES To eat bristles on anything, So I have no choice!
This is a remix of another design, but I fixed a few little issues I had with the original design (no fault of anyone, I'm just particular). These fit the fat grip brushes from amazon listed here: https://www.amazon.com/Detail-Brushes-Miniature-Detailing-Painting/dp/B075L8LCTG/ref=sr_1_16?dchild=1&keywords=golden+maple+brush&qid=1620270294&sr=8-16
They seem to be a 'golden maple' brand.
I used the 20mm deep one as these brushes are kind of bulky in the center.
This case is a bit 'flexible' if you push in the center of the lid, it flex, so do not expect a super solid box, but it does the job just fine.
In re-designing this i had a few goals in mind.
I did not want the brushes to be able to 'slide' forward and splay the brushes by hitting the edge wall, so i added slotted holders that just fit this particular brush set. I made the front slots about 5.7mm wide and I believe the rear ones are 8mm (dont quote me on that though!)
I shrank the original box to save space and material, it is now about 210mm long instead of the original 230mm I believe (i could be wrong on the original size). I also had to widen the box on the two outside holders as they were like 1.2mm thinner then the rest of the holders and the two outside brushes didnt quite fit with their size's facing up ward.
I also didnt want the brushes to flop around too much so i put the strips in the lid to cover the 'slots' when closed so the brushes shouldn't move too much.
You can also storage the brushes with their plastic covers on the bristles if thats your thing (I haven't used these brushes yet so I never bothered to take them off). But either way the brushes SHOULD NOT slide into the end of the box splaying the bristles or anything like that (i have tested it and it works great).
I removed the divider walls from bottom half of the box as this new design didnt need them, but you'll see I put them back in with a height of about 2-3mm as this seemed to help re-enforce the rigidity of the box, but I feel this still saved materials from not having to print them at their original full height (which was unnecessary with their new slotted holders)
I also removed the 'brushes' text from the top, as I just didnt want that there.
Now a few caveats.
1 I'm not a modeler so it took me hours just to do these changes. IF i was better at this, i probably would have changed the '1 latch' to '2 latches' near the corners rather than the center. I find that with this design when its latched closed my top corner kind of pulls upward as i think there was slight warping when printing (my printer just has this problem). The box stays closed just fine, it just doesnt look the same all around as one corner slightly pulls up. (functionality is fine though). Also the latch doesnt really 'CLICK' very tight, its a loose fit and while it will keep our brushes safe if you treat it nicely, if you take it and flip it up side down and shake it WILL open and your brushes will come falling out. So dont do that :)
2 I tried to model some hinge pins so you dont have to buy anything, but they came out a bit too thick and I had to sand them a ton to get them to fit, This should be easy enough for anyone to do though, sorry! I suck at modeling! So I did not bother including them, they are super flimsy anyways. Sorry!! (yes my picture has mine installed and glued into place, but i'm too ashamed to include them lol.)
3 this one is kind of important. These brushes ALL have slightly different sizes near the back end of the brush. Originally I had all the slots different sizes to fit the brushes exactly, but then i found out there is inconsistencies in how the brushes are made and so I had to make a one size fits all for this particular brand of brush. Some were slightly fatter than others.
4 lastly, the brushes are very close together so without needle nose fingers you wouldn't be able to grab and pull out, but the easy way to solve this, is simply push down on the back of the brush, this will cause the front of the brush to pop up out of its holder, then just grab and pull upward (dont pull at an angle or some of the 'fatter' brushes ends may not slide out quick and easy due to their inconsistent production). I can do this with one hand even if needed.
If someone would love to remix this and fix the latch and make hinge pins, that would be great, as i think its a solid design now, and there's LITERALLY 0 paint brush holders on here besides the one i remixed this from.
I printed this in PETG just cuz thats what I'm using for now.
YES i used supports from the plate only to help the hinges form as my PETG overhang prints fail on my printer sometime. Also i used a brim of about 4-5mm cuz i get warping on larger objects. but if you print these two pieces on their back (I may not have oriented them that way sorry if not!) you wont use much in the way of supports.
Please comment if you print it or show it! i'm new to all this so even just 'thanks' helps!! I wish was a better modeler, but tinkercad would not load the original model correctly for me so i had to use mattercontrol and holy smokes that thing is bad.. bad bad bad.. why does the camera barrel roll.. yick!!!
This is a remix of another design, but I fixed a few little issues I had with the original design (no fault of anyone, I'm just particular). These fit the fat grip brushes from amazon listed here: https://www.amazon.com/Detail-Brushes-Miniature-Detailing-Painting/dp/B075L8LCTG/ref=sr_1_16?dchild=1&keywords=golden+maple+brush&qid=1620270294&sr=8-16
They seem to be a 'golden maple' brand.
I used the 20mm deep one as these brushes are kind of bulky in the center.
This case is a bit 'flexible' if you push in the center of the lid, it flex, so do not expect a super solid box, but it does the job just fine.
In re-designing this i had a few goals in mind.
I did not want the brushes to be able to 'slide' forward and splay the brushes by hitting the edge wall, so i added slotted holders that just fit this particular brush set. I made the front slots about 5.7mm wide and I believe the rear ones are 8mm (dont quote me on that though!)
I shrank the original box to save space and material, it is now about 210mm long instead of the original 230mm I believe (i could be wrong on the original size). I also had to widen the box on the two outside holders as they were like 1.2mm thinner then the rest of the holders and the two outside brushes didnt quite fit with their size's facing up ward.
I also didnt want the brushes to flop around too much so i put the strips in the lid to cover the 'slots' when closed so the brushes shouldn't move too much.
You can also storage the brushes with their plastic covers on the bristles if thats your thing (I haven't used these brushes yet so I never bothered to take them off). But either way the brushes SHOULD NOT slide into the end of the box splaying the bristles or anything like that (i have tested it and it works great).
I removed the divider walls from bottom half of the box as this new design didnt need them, but you'll see I put them back in with a height of about 2-3mm as this seemed to help re-enforce the rigidity of the box, but I feel this still saved materials from not having to print them at their original full height (which was unnecessary with their new slotted holders)
I also removed the 'brushes' text from the top, as I just didnt want that there.
Now a few caveats.
1 I'm not a modeler so it took me hours just to do these changes. IF i was better at this, i probably would have changed the '1 latch' to '2 latches' near the corners rather than the center. I find that with this design when its latched closed my top corner kind of pulls upward as i think there was slight warping when printing (my printer just has this problem). The box stays closed just fine, it just doesnt look the same all around as one corner slightly pulls up. (functionality is fine though). Also the latch doesnt really 'CLICK' very tight, its a loose fit and while it will keep our brushes safe if you treat it nicely, if you take it and flip it up side down and shake it WILL open and your brushes will come falling out. So dont do that :)
2 I tried to model some hinge pins so you dont have to buy anything, but they came out a bit too thick and I had to sand them a ton to get them to fit, This should be easy enough for anyone to do though, sorry! I suck at modeling! So I did not bother including them, they are super flimsy anyways. Sorry!! (yes my picture has mine installed and glued into place, but i'm too ashamed to include them lol.)
3 this one is kind of important. These brushes ALL have slightly different sizes near the back end of the brush. Originally I had all the slots different sizes to fit the brushes exactly, but then i found out there is inconsistencies in how the brushes are made and so I had to make a one size fits all for this particular brand of brush. Some were slightly fatter than others.
4 lastly, the brushes are very close together so without needle nose fingers you wouldn't be able to grab and pull out, but the easy way to solve this, is simply push down on the back of the brush, this will cause the front of the brush to pop up out of its holder, then just grab and pull upward (dont pull at an angle or some of the 'fatter' brushes ends may not slide out quick and easy due to their inconsistent production). I can do this with one hand even if needed.
If someone would love to remix this and fix the latch and make hinge pins, that would be great, as i think its a solid design now, and there's LITERALLY 0 paint brush holders on here besides the one i remixed this from.
I printed this in PETG just cuz thats what I'm using for now.
YES i used supports from the plate only to help the hinges form as my PETG overhang prints fail on my printer sometime. Also i used a brim of about 4-5mm cuz i get warping on larger objects. but if you print these two pieces on their back (I may not have oriented them that way sorry if not!) you wont use much in the way of supports.
Please comment if you print it or show it! i'm new to all this so even just 'thanks' helps!! I wish was a better modeler, but tinkercad would not load the original model correctly for me so i had to use mattercontrol and holy smokes that thing is bad.. bad bad bad.. why does the camera barrel roll.. yick!!!
Similar models
thingiverse
free
Smaller Model Detail Brush citadel Storage box container brush holder by Electricview
...dnt re-print them. they may not work without sanding. sorry! i just suck at modeling!!! (but the lid and bottom should be fine!)
thingiverse
free
Vader Box by MikeT71
...them, but they are cool and functional. i did not paint this one yet. also, had to add a pull for it so that you could open it.
thingiverse
free
Apple Watch Band Holder by iShabaz
...on the bottom of it so it wouldnt actually fit into this holder so i added a notch cutout on all of them so that it would fit in.
thingiverse
free
Drillbit holder/box by AndersV209
... fail half way thru the top part and it was starting to run out of grey fillement so that is the reason behind the colour change.
thingiverse
free
Box for Die Holders by West3DP
...ld downscale the box if you used the original die holder file)
i designed it to hold 2 small die holders, and 3 large die holders
thingiverse
free
Upright Toilet Brush Holder by jewzaam
... outside. i know i can just print another so no biggie and i have a ton of acrylic paint laying around that'll do just fine.
thingiverse
free
Blood Rage Age Card Holder by robmotron
...nt have the player number cards separated out. this should fit more cards and some might prefer having all of the cards combined.
thingiverse
free
Down-Angled Brush Holder with Water Tub and Drip Tray by Alienate
...also added some of my broken gradient artwork on the sides and my art with robots logo to the front. feel free to remix them out.
thingiverse
free
Enclosure for ender 3 electronics
...all stop so you dont pull the electronics all the way out.
i also printed out the knob from the original for a pull for the box.
grabcad
free
Paint Brush Cleaner
...brush. it is small enough so you can just hold it in the palm of your hand or you can set it on your table or in your work space.
Electricview
thingiverse
free
Sonic Coin Remix (fixed eye) by Electricview
...y so i hacked in a few extra poly's a little sloppy but it prints great now!
i used pla no supports. .15 quailty. prusa mk3s+
thingiverse
free
Fragile Sticker Dispenser by Electricview
...rusa mk3s+ with .20mm quality and 15% infill. no supports needed just make sure everything is oriented correctly before printing.
thingiverse
free
Magnetic LACK Enclosure Wall Panels REMIX passthrough. by Electricview
...!
i printed this at the same settings as the rest of the lack stuff. .20 speed, with 20 infill. petg (used prusament) on i3mk3s+.
thingiverse
free
Slanted 4.5inch spray bottle holder (35mm diameter bottle) by Electricview
...ne will ever need this as it was a very specific thing i needed but i figured maybe someone will if they use these spray bottles.
thingiverse
free
Meross Led strip light control box bracket holders mount for lack by Electricview
...de that has most surface contact before printing.
i used petg at 20% infill to make it a tad stronger at .20mm and it works fine.
thingiverse
free
Smaller Model Detail Brush citadel Storage box container brush holder by Electricview
...dnt re-print them. they may not work without sanding. sorry! i just suck at modeling!!! (but the lid and bottom should be fine!)
Maple
turbosquid
$49
Maple
...royalty free 3d model maple for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1425185)
turbosquid
$6
D2.C1.32 Maple Tree-Maple
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
Japanes maple
...japanes maple
3dexport
a nice japanese maple very simple but good to decorate an environment.
3ddd
$1
Офисный набор MAPLE
...le
3ddd
maple , стол , стул
офисный набор maple
3d_export
$10
maple tree
...maple tree
3dexport
- maple tree - height: 3.5m - polys: 317,564 - verts: 431,526 - - obj(mtl) - textures
3d_export
$10
maple tree
...maple tree
3dexport
3d_export
$5
red maple
...red maple
3dexport
archive3d
free
Maple 3D Model
...odel
archive3d
maple tree plant
maple n150512 - 3d model (*.3ds) for exterior 3d visualization.
archive3d
free
Maple 3D Model
...odel
archive3d
tree maple plant
maple n161111 - 3d model (*.3ds) for exterior 3d visualization.
archive3d
free
Maple 3D Model
...odel
archive3d
maple tree plant
maple n310811 - 3d model (*.3ds) for exterior 3d visualization.
Brush
3d_export
free
brush
...brush
3dexport
brush
3d_export
free
brush
...brush
3dexport
it is brush
archibase_planet
free
Brush
...brush
archibase planet
brush toilet brush sanitary ware
brush - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Brush
...rush
archibase planet
rack brush cleaner toilet brush sanitary ware
brush - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Brush
...brush
archibase planet
brushes
brush - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Brush
...brush
archibase planet
?oilet brush sanitary ware
brush - 3d model (*.gsm+*.3ds) for interior 3d visualization.
design_connected
$11
Brushes
...brushes
designconnected
smallaccents brushes computer generated 3d model.
turbosquid
$1
Brush
...rush
turbosquid
royalty free 3d model brush for download as on turbosquid: 3d models for games, architecture, videos. (1391784)
3d_export
$5
brush
...brush
3dexport
comb
turbosquid
$10
Brush
...squid
royalty free 3d model brush for download as ma and obj on turbosquid: 3d models for games, architecture, videos. (1191257)
Brushes
3d_export
free
brush
...brush
3dexport
brush
3d_export
free
brush
...brush
3dexport
it is brush
archibase_planet
free
Brush
...brush
archibase planet
brush toilet brush sanitary ware
brush - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Brush
...rush
archibase planet
rack brush cleaner toilet brush sanitary ware
brush - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Brush
...brush archibase planet brushes brush - 3d model (*.gsm+*.3ds) for interior 3d...
archibase_planet
free
Brush
...brush
archibase planet
?oilet brush sanitary ware
brush - 3d model (*.gsm+*.3ds) for interior 3d visualization.
design_connected
$11
Brushes
...brushes
designconnected
smallaccents brushes computer generated 3d model.
turbosquid
$1
Brush
...rush
turbosquid
royalty free 3d model brush for download as on turbosquid: 3d models for games, architecture, videos. (1391784)
3d_export
$5
brush
...brush
3dexport
comb
turbosquid
$10
Brush
...squid
royalty free 3d model brush for download as ma and obj on turbosquid: 3d models for games, architecture, videos. (1191257)
Golden
3d_export
$20
golden chest-golden case
...golden chest-golden case
3dexport
golden case/gold chest/ with mirror lock
3d_export
$10
golden diosma
...golden diosma
3dexport
golden diosma bush
3d_export
$5
Golden medallion
...golden medallion
3dexport
golden medallion with jewels
3ddd
free
golden frame
...golden frame
3ddd
рама
golden frame
3d_export
$5
Golden Mirror
...golden mirror
3dexport
golden mirror for your interiors
turbosquid
$8
Golden
...y free 3d model golden for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1435464)
3d_export
$12
Golden mask
...golden mask
3dexport
golden mask - subdivide ready 3x3
3d_export
$5
golden freddy
...golden freddy
3dexport
golden freddy from the fnaf game.
3ddd
$1
Golden panel
...golden panel
3ddd
панель
golden mesh with gold material
turbosquid
$40
Golden
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Storage
archibase_planet
free
Storage
...storage
archibase planet
shelf locker shelving
overhead storage unit - 3d model for interior 3d visualization.
turbosquid
$3
storage
...id
royalty free 3d model storage for download as stl and ipt on turbosquid: 3d models for games, architecture, videos. (1249483)
3d_export
$5
Oil storage
...oil storage
3dexport
big oil storage or barrel or storage tank 2 formats lwo & obj
turbosquid
$15
storage
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
storage
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
storage
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Storage Baskets
...storage baskets
3ddd
restoration hardware , корзина
restoration hardware storage baskets
3d_export
$5
water tank of storage-tank oiltanker storage
...ater tank of storage-tank | oiltanker storage can be used in ed model environment. this low poly water tank can be used for free.
archive3d
free
Storage 3D Model
...3d model
archive3d
storage shelving furniture
storage - 3d model for interior 3d visualization.
3d_export
$8
chain storage wheel
...chain storage wheel
3dexport
chain storage wheel
Paint
archibase_planet
free
Paints
...paints
archibase planet
paints paint
paints n241211 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Paint
...paint
archibase planet
jar of paint paint can
paint - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3ddd
$1
paint
...paint
3ddd
paint
archibase_planet
free
Paint
...paint
archibase planet
paint
paint - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3ddd
$1
Painting
...painting
3ddd
картина
painting in double wooden frame decorated antique
3ddd
$1
The collection of paintings
...
картина , фото
collection of modern and contemporary paintings.
contemporary paintings.
turbosquid
$29
painting
...free 3d model painting for download as 3ds, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1383201)
turbosquid
$1
Painting
...ee 3d model painting for download as 3ds, obj, md3, and blend on turbosquid: 3d models for games, architecture, videos. (1207611)
turbosquid
free
Painting
... 3d model painting for download as ma, 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1219609)
3ddd
$1
PAINTINGS
...paintings
3ddd
панно
размеры:
1170х900
Case
3d_export
$1
case
...case
3dexport
case
archibase_planet
free
Case
...case
archibase planet
showcase show-case glass case
glass-case + cakes - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
showcase show-case glass case
glass-case for chips - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case shelving drawer
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case rack locker
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case drawer kitchen furniture
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case cupboard shelving
glass case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case handbag suitcase
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case suitcase
case 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
locker case dresser
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Box
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box 2 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
carton cardboard box box
box 1 - 3d model (*.3ds) for interior 3d visualization.
3d_export
$6
box
...box
3dexport
box
3d_export
$5
Box
...box
3dexport
box
3d_export
$5
box
...box
3dexport
box
3d_export
$5
box
...box
3dexport
box
archibase_planet
free
Box
...box
archibase planet
box box for paper notebook pencil
box - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box n170111 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box n050411 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Boxes
...boxes
archibase planet
boxes box case bin
boxes n281213 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
Set
archibase_planet
free
Setting
...setting
archibase planet
setting cover place setting
setting - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Setting
...setting
archibase planet
setting place setting cover
setting - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Setting
...setting
archibase planet
setting place setting cover
setting - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$8
decorative set mens set
...decorative set mens set
3dexport
decorative set men's set
archibase_planet
free
Set
...anet
set kitchen ware kitchen set kitchen tools
set kitchen tools n281114 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Set
...set
archibase planet
beer set bar equipment
beer set - 3d model for interior 3d visualization.
archibase_planet
free
Set
...set
archibase planet
cover place setting
set - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Set
...set
archibase planet
kitchen set kitchen ware
set - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Set
...set
archibase planet
set cup glass kitchen ware
set - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Set
...set
archibase planet
flatware cover place setting
set n311210 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Detail
3d_export
free
detail
...detail
3dexport
turbosquid
$20
High Detail Virus Detailed
...royalty free 3d model high detail virus for download as blend on turbosquid: 3d models for games, architecture, videos. (1531141)
3d_export
$5
detail
...detail
3dexport
metallic solid object
turbosquid
$25
details
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$3
Detailed Book
...detailed book
3docean
book
detailed closed book with custom textures and separate pages
3d_ocean
$6
Detailed Pencil
...detailed pencil
3docean
eraser office pen pencil tool
detailed hexagon pencil with optional eraser
3d_ocean
$16
Detailed Asteroids
... models, perfect for use in space and sci-fi scenes… the extinction of the dinosaurs, the asteroid belt between earth and mars...
turbosquid
$495
Accurate and Detailed Internal Organs with Detailed Textures
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$19
High detailed tree
...high detailed tree
3docean
detailed leaves tree
high detailed tree
3d_export
$10
Detail 3D Model
...detail 3d model
3dexport
detail
detail 3d model mur 20254 3dexport