Thingiverse
Desk Shelving (Ikea Hack) by JRodrigo
by Thingiverse
Last crawled date: 4 years, 5 months ago
Printed Part
I printed all parts in Yellow PLA to avoid warping.
0.34mm Layer height , 4 perimeters, 4 solid top/bottom, 25% infill: ~135g (0.3 lb)
0.34mm Layer height, 3 perimeters, 3 solid top/bottom, 15% infill: ~100g (0.22 lb)
Shelve from Ikea or another supplier
EKBY LAIVA - Article Number 301.787.04
Dimensions: 59 cm (23¼") x 24 cm (9½") x 1,5 cm (5/8")
I printed all parts in Yellow PLA to avoid warping.
0.34mm Layer height , 4 perimeters, 4 solid top/bottom, 25% infill: ~135g (0.3 lb)
0.34mm Layer height, 3 perimeters, 3 solid top/bottom, 15% infill: ~100g (0.22 lb)
Shelve from Ikea or another supplier
EKBY LAIVA - Article Number 301.787.04
Dimensions: 59 cm (23¼") x 24 cm (9½") x 1,5 cm (5/8")