DEPRECATED - SLS - Orion - Interim Cryogenic Propulsion Stage by Terefenko

Last crawled date: 3 years ago

This model has been deprecated in favor of the Version 2 model which has changed and is more complete. It may be found at:
Version 2
This is my rendition of the SLS (Space Launch System) Interim Cryogenic Propulsion Stage.
This is meant for educational and display purposes. I tried to get the proportions as close as possible, but information on these things is a bit difficult for me to get. So if there is a NASA engineer out there who can get me the actual dimensions, I would be able to do a more precise model. Additionally, I attempted to design it so it may be displayed entirely closed or partially open for explanation, like the cover picture.
I decided that it was sitting in my archives long enough and if folks want me to continue adding or refining this model, please let me know. I am still working on the fold out solar panels and everything higher than the ICPS (crew capsule, etc).
NOTE: All the models are sized at 4x scale. So if you want to print it on 300 mm circular bed, you will need to scale down each part to 25% the size it is imported. I have not attempted to scale it down further, so you are on your own there.
I did not go though the detailed assembly instruction process on this one yet, like I did with my other models. But would do so given an enthusiastic response. I plan on uploading it to the NASA site after I have refined it a bit more.
Also, if you want to use the Orion Capsule from the NASA site, here are some tips.
If scaling down my model to 25%, you will need to scale up the NASA Orion capsule to 735%
If scaling down my model to 20%, you will need to scale up the NASA Orion Capsule to 585%
If you attempt to build this and are missing a part, please let me know. I had a couple versions of things and may have been missed during the upload process.
Cheers!