Thingiverse
Delta Printer Electronics Cooling Unit by electronlove
by Thingiverse
Last crawled date: 3 years, 1 month ago
A cooling duct designed for a large Delta Printer (1M in height) with 455 mm 2020 horizontal extrusions (RobotDigg 2040 corners). The housing is for a Beaglebone Black and Replicape mounted to an 0.09" aluminum plate that functions as a heatsink for the power supply and SSR (beneath the heated bed. Fan conduit is designed to accomodate two 30mm x 30mm x 10mm fans to push air across the printer controller and stepper drivers, isolating it from the heated bed and stepper motors.
Two sets of fan grills mount to inside of 2020 extrusions with M3 screws and the grill covers mount on the exterior with M5 x 8mm screws. You should plan to have plenty of M3 screws to hold it all together.
Fan wiring may require the use of a dremel until I plan the most effective wire path (I am leaning towards a subtle notch on the top conduit cover.
I have used Sunon 30mm fans, part # MC30101V2-000U-A99. The specs state 4.6 CFM which should provide adequate airflow when two are used in parallel.
See https://github.com/electronlove/DeltaSpasm for more info on "Delta Spasm" printer build, a derivative of David Crocker's Large Delta Printer (https://miscsolutions.wordpress.com/2015/06/01/building-a-large-delta-printer/) and Norwegian Creations Large Delta printer (https://www.norwegiancreations.com/2017/01/building-a-large-kossel-delta-printer-pt-1-parts-and-planning/).
Two sets of fan grills mount to inside of 2020 extrusions with M3 screws and the grill covers mount on the exterior with M5 x 8mm screws. You should plan to have plenty of M3 screws to hold it all together.
Fan wiring may require the use of a dremel until I plan the most effective wire path (I am leaning towards a subtle notch on the top conduit cover.
I have used Sunon 30mm fans, part # MC30101V2-000U-A99. The specs state 4.6 CFM which should provide adequate airflow when two are used in parallel.
See https://github.com/electronlove/DeltaSpasm for more info on "Delta Spasm" printer build, a derivative of David Crocker's Large Delta Printer (https://miscsolutions.wordpress.com/2015/06/01/building-a-large-delta-printer/) and Norwegian Creations Large Delta printer (https://www.norwegiancreations.com/2017/01/building-a-large-kossel-delta-printer-pt-1-parts-and-planning/).
Similar models
thingiverse
free
Beaglebone Black CRAMPS Printer Mount by electronlove
...on including standoffs, strain relief, and active cooling mount for 20 mm fan. mounting holes for m5 screws onto 2020 extrusions.
thingiverse
free
Nema 23 Stepper db9 Plug Case by claudiapinto
...s wires and screw the cover on the motor with 4 more m3 screws.
all to give a cleaner and more professional look to our projects.
thingiverse
free
2020 Extrusion 40mm Fan Mount by Zeroflow
...ny 40mm fan inside of an anycubic kossel which uses two spaced 2020 extrusions.
fan can be used for stepper motor or pcb cooling
thingiverse
free
Hall Endstop Mounts for Delta Printer by electronlove
...
m3 screws all around for holding the endstops in place. with the magnets, they trigger at ~ 10mm which should be acceptable.
thingiverse
free
2020 Camera Mount
...t a standard 1/4" tripod screw, and should accommodate any small camera that has a tripod mount. (maybe not a dlsr, though!)
thingiverse
free
Stepper motor mount for 2020 extrusion by mrminhghi
...er motor mount for 2020 extrusion.
made for extruder motor mount.
mount with 2 m5 screw 6mm.
motor tighten with m3 screw and nut.
thingiverse
free
Kossel 2020 upper endstop and limit switch mount - low profile by KDan
...d-printers
i threaded the board mounting holes with an m3 tap.
it mounts to the 2020 extrusion with an m3 screw and m3 t-nut.
thingiverse
free
Stepper-Driver 40mm fan mount for 2020 extrusion by PeaonLeon
... blades.
added are 3mm holes for the fan and 4mm holes for the screws and slot-nuts.
feel free to send me some pics of your makes
thingiverse
free
Vertex K8400 Heated bed MOS-mount by RubenDenolf
...s: https://www.banggood.com/3d-printer-parts-board-high-power-expansion-add-on-heated-bed-mos-module-p-1141753.html?rmmds=myorder
thingiverse
free
Arduino Mega 2560 Case + Mount by joochung
... m3 screws. it will take some effort but they will fit. i intended to mount some fans to the case by screwing them to the grills.
Electronlove
thingiverse
free
Flange by electronlove
...thingiverse
standard pipe flange. designed for a spool holder support. fits 1" electrical conduit (actual diameter ~30 mm).
thingiverse
free
Spiked Snail by electronlove
...ny fine creatures has gone away. this particular snail is quite nice to print and paint - especially for the multitude of spikes
thingiverse
free
Voronoi Twisted Gear Lamp by electronlove
...ed gear lamp by electronlove
thingiverse
created through the voronoi online tool at http://www.voronator.com/
not yet printed...
thingiverse
free
Raspberry Pi Case for 3D Scanner by electronlove
...ttom mount is from https://www.thingiverse.com/thing:1466385
for more information, see https://github.com/electronlove/3d_scanner
thingiverse
free
Maryland Blue Crab by electronlove
...j file was simplified in meshlab to reduce the object faces down from 11,317,504 to 2,000,000 faces and exported as an .stl file.
thingiverse
free
Split Loom Wire Wrapping Mounts by electronlove
...with 1x m3 screw. diameter is 13.5 mm. ideally part(s) should be printed in flexible filament and slowly to minimize stringing.
thingiverse
free
75MM to 50MM VESA Mount Adapter by electronlove
...rew pattern. i'm using to mount a waveshare display to an arm (see https://www.thingiverse.com/thing:2799628)
it just works!
thingiverse
free
Beaglebone Black CRAMPS Printer Mount by electronlove
...on including standoffs, strain relief, and active cooling mount for 20 mm fan. mounting holes for m5 screws onto 2020 extrusions.
thingiverse
free
Neopixel Ring Articulating Mount by electronlove
...nd run as systemd process at startup. see https://github.com/electronlove/ministudio and web folder for additional information!
thingiverse
free
TSL2591 Articulating Sensor Mount by electronlove
...he arm together. i utilized a small rod to attach the arm to the base. see http://www.thingiverse.com/make:321199 for mounting.
Delta
thingiverse
free
Delta
...delta
thingiverse
new-delta
thingiverse
free
Thor-Delta
...thor-delta
thingiverse
this is the thor-delta 1 rocket that delivered the skynet satellite to orbit.
thingiverse
free
Delta Plane/Avión Delta by Enriquepc3d
...n con una configuración delta desarrollado en un proyecto de universidad. el avión consta de 5 partes impresas de forma separada.
thingiverse
free
Freeplug delta by luap62
...freeplug delta by luap62
thingiverse
for freebox delta
thingiverse
free
Lancia Delta by Soyelflaco
...lancia delta by soyelflaco
thingiverse
lancia delta
thingiverse
free
LANCIA DELTA by _GABBER
...lancia delta by _gabber
thingiverse
lancia delta gadget
thingiverse
free
delta test by olo2000pm
...delta test by olo2000pm
thingiverse
delta test
140x140
thingiverse
free
Delta Tricopter by zdar
...delta tricopter by zdar
thingiverse
a delta style tricopter.
thingiverse
free
Delta ring
...delta ring
thingiverse
:)
thingiverse
free
The delta tensioning by RuiJan1
...the delta tensioning by ruijan1
thingiverse
this is a delta prenter the arm tensioning
Unit
thingiverse
free
unit
...unit
thingiverse
unit patch
thingiverse
free
Shelving Unit
...shelving unit
thingiverse
a shelving unit for anything
thingiverse
free
AirCon Unit
...aircon unit
thingiverse
small aircon unit at 1:50 scale for modern buildings.
.
thingiverse
free
Unit Sphere Minus Unit Cones by whieldon
...as part of a multivariable calculus class, illustrating a solid formed by taking a unit sphere and removing a pair of unit cones.
thingiverse
free
TV Unit by EmreTufanoglu
...tv unit by emretufanoglu
thingiverse
tv unit
thingiverse
free
Shelving Unit by croozn
...shelving unit by croozn
thingiverse
shelving unit
thingiverse
free
Condenser Unit by haihuynh
...condenser unit by haihuynh
thingiverse
condenser unit
thingiverse
free
Blucher base sabot 4 units, 3 units and 2 units by GenghisBoB
...by genghisbob
thingiverse
this is a sabot base to take 40x20mm bases to manage 6mm napoleonic's figures between game systems
thingiverse
free
Dolos unit by Britsa007
...a dolos for easy printing. two has to be printed and glued back to back to create one unit.
hole added to use unit as a keychain.
thingiverse
free
Draw Unit by b1eiji
...draw unit by b1eiji
thingiverse
just a normal draw unit with a gecko!
Electronics
thingiverse
free
Electron by RikerLansdale
...electron by rikerlansdale
thingiverse
an electron to go on the electron ring
thingiverse
free
Electronics box
...onics box
thingiverse
electronics box
electronics box for ip camera mount for ender 3.
https://www.thingiverse.com/thing:4086651
thingiverse
free
electronic load
...electronic load
thingiverse
electronic load. maximum load 100v. 75w
thingiverse
free
Electronic Box
...electronic box
thingiverse
electronic box. arimf muffle furnace controller. no screw design.
thingiverse
free
Electronics enclosure
...electronics enclosure
thingiverse
a box that i plan to use for some of my electronics - still work in progress.
thingiverse
free
Electronics box for misc electronics by brfields44
... / electronics box. drill your holes for your wires to make it custom. i can also make changes if you need them. just message me.
thingiverse
free
electronic sructure by Phokas
...electronic sructure by phokas
thingiverse
electronic structure
thingiverse
free
Electronic board multimaterial
...electronic board multimaterial
thingiverse
electronic board multimaterial mod
thingiverse
free
Electron Ring by RikerLansdale
...electron ring by rikerlansdale
thingiverse
connects to the proton and has the electrons on it
thingiverse
free
Electron in LArTPC by lululaplap
...electron in lartpc by lululaplap
thingiverse
electron showering in a lartpc detector
Cooling
thingiverse
free
cool
...cool
thingiverse
cool
thingiverse
free
cool by cool128000
...cool by cool128000
thingiverse
cool
thingiverse
free
cool by cool128000
...cool by cool128000
thingiverse
cool
thingiverse
free
cool by GenericStudentss
...cool by genericstudentss
thingiverse
cool
thingiverse
free
School is cool
...school is cool
thingiverse
school is cool
thingiverse
free
cool by Xangar
...cool by xangar
thingiverse
looks cool
thingiverse
free
cool by swag
...cool by swag
thingiverse
cool beans
thingiverse
free
Cooling by GryZZli
...ling by gryzzli
thingiverse
cool on a cooling tunnel. by narrowing the funnel get the rush of air that is dispersed at the exit.
thingiverse
free
suitcase is cool by beonline
...suitcase is cool by beonline
thingiverse
suitcase is cool
suitcase is cool
suitcase is cool
suitcase is cool
suitcase is cool
thingiverse
free
Cool Lamborghini
...cool lamborghini
thingiverse
this is such a cool design!!! please like!
Printer
thingiverse
free
printer by riegel
...printer by riegel
thingiverse
printer
thingiverse
free
Printer by elnuvoldesign
...printer by elnuvoldesign
thingiverse
printer
thingiverse
free
3D Printer of a 3D printer by wacko
...3d printer of a 3d printer by wacko
thingiverse
a 3d print of the new low costs ready to print, 3d printer from www.pp3dp.com
thingiverse
free
Printer case light (X3D printer) by arekm
...printer case light (x3d printer) by arekm
thingiverse
printer case light.
thingiverse
free
Printer Knob by arthurTW
...printer knob by arthurtw
thingiverse
printer knob for delta 3d printer
thingiverse
free
3d printer part for Irapid printer by esadesad
...use damage to your printer. this solution fixes the platform of the printer with magnets and allows more precise printing models.
thingiverse
free
printer parts by kmoore22
...printer parts by kmoore22
thingiverse
printer parts for montevallo build your own 3d printer course
thingiverse
free
3D PRINTER by juju68
...3d printer by juju68
thingiverse
3d printer
thingiverse
free
Light on the printer by umitakin
...light on the printer by umitakin
thingiverse
light on the printer
thingiverse
free
Calibrate the printer by olo2000pm
...calibrate the printer by olo2000pm
thingiverse
calibrate the printer