Thingiverse
Delta printer calibration object - rod lengths only (faster print time) by thedoble
by Thingiverse
Last crawled date: 4 years, 7 months ago
This is a slight mod of dolpin's excellent rostock calibration object.
I had some problems with rod lengths so I wanted a faster way of re-checking them after each change. This object is simply the 'pegs' for measuring from dolpin's file, without the base. It means you can print it in 10 minutes instead of 40 mins :)
The file will also automatically centre as I left a tiny amount of the 'base' there, but your slicer should ignore it as it's too thin.
Measure the blocks on each axis after printing - they should be 60mm apart.
I had some problems with rod lengths so I wanted a faster way of re-checking them after each change. This object is simply the 'pegs' for measuring from dolpin's file, without the base. It means you can print it in 10 minutes instead of 40 mins :)
The file will also automatically centre as I left a tiny amount of the 'base' there, but your slicer should ignore it as it's too thin.
Measure the blocks on each axis after printing - they should be 60mm apart.