Thingiverse
Dell 7010 Wall Mount by Nadaron
by Thingiverse
Last crawled date: 5 years, 1 month ago
A wall mount for the Dell 7010 SFF (Small Form Factor) PC. The width of the case is approx. 65,5 mm, I left 66 mm space, so it sits in firmly. Print two of them and mount them both between or outside the feet of the case, so it can not slide out. There are two holes for 4 mm chipboard screws with countersunk head, I used Spax 4 x 25 to fix them on a wooden plate.
It's not really a remix of kunseltech design, I rebuild it from the scratch because I didn't manage to convert his design from inchs to the metric system. I rounded the edges and some dimensions may differ, but the idea is the same. I included the STEP file, feel free to redesign if needed.
It's not really a remix of kunseltech design, I rebuild it from the scratch because I didn't manage to convert his design from inchs to the metric system. I rounded the edges and some dimensions may differ, but the idea is the same. I included the STEP file, feel free to redesign if needed.