Thingiverse
Decotruss end piece by AlpinerBergen
by Thingiverse
Last crawled date: 4 years, 8 months ago
15cm triangular Decotruss end piece as a solid object, or multicolor in six different steps. Do not reposition the six single parts in Makerware, so they are stacked and printed in the right order. Three printed objects are needed per Decotruss 15cm triangular truss.
Slice the multicolor version with Makerware 2.1. Do NOT slice these six objects with Makerware 2.2.0, because it automatically puts the object on the printerbed, even if you choose not do so!! (Not tried with Makerware 2.2.2 yet)
15cm triangular truss:http://www.thomann.de/gb/deco_truss.html
To be printed with 15% fill, 3 shells, 0,1mm filament layer height, without raft or supports.
Slice the multicolor version with Makerware 2.1. Do NOT slice these six objects with Makerware 2.2.0, because it automatically puts the object on the printerbed, even if you choose not do so!! (Not tried with Makerware 2.2.2 yet)
15cm triangular truss:http://www.thomann.de/gb/deco_truss.html
To be printed with 15% fill, 3 shells, 0,1mm filament layer height, without raft or supports.