Thingiverse
DecoTime angular timer by coolate
by Thingiverse
Last crawled date: 3 years, 1 month ago
DecoTime is my Art Deco styled timer. It is powered by an Arduino driving two x27 168 or switec X25 stepper motors moving the needles. It also uses a MCP23S17 to drive the LEDs and take input from the two rotary encoders. A solenoid rings the bell when finished and the top LED flashes. It can be run off batteries(alkaline or NiMh), or usb. It also has an expansion port to use I2C with power. You can find the knobs, battery pack, and needles in my other uploads on thingiverse.
You can read all about it in great detail on my website, including schematics and directions.http://coolate.com/blog/coolate-pages/deco-time-angular-timer/
I printed the parts on an ultimaker, seeMeCNC and an old makerbot. The two main parts require supports, and should be printed inside down toward the plate. I used PLA, and coated some parts in XTC to make them shine.
ALL the design work was done in tinkercad, and are public if you want to fiddle with it.
Needles/hands:https://www.thingiverse.com/thing:2308109
Knobs:https://www.thingiverse.com/thing:2313192
https://youtu.be/BvnD95T2fO4
You can read all about it in great detail on my website, including schematics and directions.http://coolate.com/blog/coolate-pages/deco-time-angular-timer/
I printed the parts on an ultimaker, seeMeCNC and an old makerbot. The two main parts require supports, and should be printed inside down toward the plate. I used PLA, and coated some parts in XTC to make them shine.
ALL the design work was done in tinkercad, and are public if you want to fiddle with it.
Needles/hands:https://www.thingiverse.com/thing:2308109
Knobs:https://www.thingiverse.com/thing:2313192
https://youtu.be/BvnD95T2fO4
Similar models
thingiverse
free
Needles or hands for meters, clocks or dials by coolate
...-timer/).
they might make a good starting point for others.
here is what i used them on:https://www.thingiverse.com/thing:2572062
thingiverse
free
Art Deco Knobs for 6mm 1/4inch rotary encoders by coolate
...-timer/).
they might make a good starting point for others.
here is what i used them on:https://www.thingiverse.com/thing:2572062
thingiverse
free
Vaccination Needle by vsp4dutchb
...ncluded a larger model you can use for other things, i made it a dr who needle that you can give to a friend or use on a costume.
thingiverse
free
Battery tray for Heltec WiFi LoRa 32 (V2) minimal case
...g.
i used 3 m2.5 nuts and screws for securing all 3 parts together. therefore i drilled the originally holes a little bit wider.
thingiverse
free
Arrow - Bike Light by RotaryDesign
...oy !
added new file with easy print glass.
as promised here is battery powered version:
https://www.thingiverse.com/thing:3091337
thingiverse
free
Mini LED Desk Lamp by djminnesota
...or is up to you
a foot or two of insulated wire
one rocker switch. the one i used was 1x1.5x1 inches
two 9v battery holders
thingiverse
free
Snap-on battery charger Timer part by DIYKenny
...bout getting this part printed and shipped to you. currently i can only print in pla but will be upgrading to petg in the future.
thingiverse
free
Battery Dispenser Long (curved, mountable) by mopenstein
...from:https://www.thingiverse.com/thing:4491987
i wanted it to be mountable and also use a curved shoot instead of an angular one.
thingiverse
free
Mandalorian helmet headphones stand by CheesmondN
... let me know. i have also split the top into two prints so that you can print the two colours separately and stick them together.
thingiverse
free
Battery Power Supply by elias9300
...a battery operated power supply. details you can find on my githubhttps://github.com/elias0172/battery-psu-hw
print with support.
Decotime
thingiverse
free
Needles or hands for meters, clocks or dials by coolate
...the timer hands/needles i ended up making for my decotime timer. they are currently sized for a 2 inch...
thingiverse
free
Art Deco Knobs for 6mm 1/4inch rotary encoders by coolate
...a few knobs i ended up making for my decotime timer. they are currently sized for a keyed rotary...
Coolate
thingiverse
free
Needles or hands for meters, clocks or dials by coolate
...-timer/).
they might make a good starting point for others.
here is what i used them on:https://www.thingiverse.com/thing:2572062
thingiverse
free
Servo Mount Deluxe hiteck hs-486hb and others by coolate
...o help it work better with the hs mount style in a different orientation. also added a riser block for my needs and more support.
thingiverse
free
KitchenAid A9 coffee grinder spout upgrade by coolate
...es all over, this helps quite a bit. it probably will not fit the newer versions with the round output, but it could be modified!
thingiverse
free
RadioShack Ultrasonic Range sensor mount 2760342 by coolate
...not be a perfect fit for all as they seem to have low tolerance on where they are soldered on board. but they are easy to modify.
thingiverse
free
DB 19 D-sub 19 connector for apple 2c external drive by coolate
...s is a db19 connector for older apple ii computers like the apple //c. it will work of course for any 19 pin connector like this.
thingiverse
free
Art Deco Knobs for 6mm 1/4inch rotary encoders by coolate
...-timer/).
they might make a good starting point for others.
here is what i used them on:https://www.thingiverse.com/thing:2572062
thingiverse
free
Vectrex controller by coolate
...id=515
build info:http://coolate.com/blog/blog/2016/05/18/vectrex-controllers/
vectrex info:https://en.wikipedia.org/wiki/vectrex
thingiverse
free
MacBook Pro Screen Crutch / Support / repair by coolate
...es are for nylon 3mm screws, but really not needed.
good luck!
*note picture is of an earlier version without holes and supports.
thingiverse
free
26650 13s battery pack by coolate
... site: https://coolate.com/blog/blog/2018/07/21/a-new-battery-for-my-electric-lawn-mower-or-how-i-built-a-13s-26650-battery-pack
Timer
turbosquid
$5
timer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Timer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
design_connected
$9
Two Timer
...two timer
designconnected
established & sons two timer computer generated 3d model. designed by industrial facility.
3d_export
free
sand timer
...sand timer
3dexport
turbosquid
$3
Timer Ball
...lty free 3d model timer ball for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1525312)
turbosquid
$15
Bomb with Timer
... model bomb with timer for download as max, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1273930)
turbosquid
$59
Timer Bomb
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
oven timer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
Kitchen Timer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$7
Eggs Timer
...odel eggs timer for download as 3ds, obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1455294)
Angular
turbosquid
$40
Angular sofa
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$39
angular ionic column
...
ancient roman column with angular ionic capital 3d model. lowpoly real-time ready, multiple import formats thank you for reading
3d_export
$29
Soft angular sofa 3D Model
...soft angular sofa 3d model
3dexport
sofa soft corner angular
soft angular sofa 3d model ffdspline 41723 3dexport
turbosquid
$2
Children's Wardrobe Angular
...dren's wardrobe angular for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1638098)
3ddd
$1
Sofa angular Alfa
...a angular alfa
3ddd
alfa , угловой
кожаный диванчик подойдёт для кафешек, ресторанов ...
3ddd
$1
Вытяжка угловая Fox 24 Angular
...вытяжка угловая fox 24 angular
3ddd
вытяжка
вытяжка угловая fox 24 angular. моделил с картинки. размеры с каталога.
turbosquid
$20
Angular Triton Sea Shell
...ar triton sea shell for download as blend, obj, fbx, and gltf on turbosquid: 3d models for games, architecture, videos. (1627609)
turbosquid
$29
Angular contemporary sofa Mango
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$27
Angular sofa 2050x1530-v5
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$27
Angular sofa 1920x1350-v6
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.