Decorative LED standing lamp - DIYigne

Last crawled date: 4 years, 4 months ago

Just found an old IR Controlled LED Strip and some aluminium profiles.
I made this to waste some time :)
The used aluminium profile is "L" formed - 20x20mm
The RGB Controller is inside the printed socket.
Base Plate not necessary for 50cm Profile.
On the Photos you can see that the print has little leaks in the shells. I printed these as a draft. I recommend to print with 3 shells and at least 20% Infill. To fix the cover is use a solder iron to enlarge the corners to fit and stay close.