Thingiverse
Decorative Box by Devmiser
by Thingiverse
Last crawled date: 4 years, 4 months ago
Designed this decorative box that can be used for any purpose. The design on the lid and the sides is not original, but I regret that I cannot find it again for purposes of providing attribution.
Printing:
I printed this at 70% scale to get the size I wanted, but you can choose your own scale.
I used 20% infill, but a higher infill would make the box more substantial.
I printed it in PLA at 20mm. The lid is a tight fit, so beware if your printer does not have good tolerances.
The box was printed without supports. I printed the lid on its side with support enforcements inside only, i.e. not on the decorative side.
Printed on a Prusa Mini+
Printing:
I printed this at 70% scale to get the size I wanted, but you can choose your own scale.
I used 20% infill, but a higher infill would make the box more substantial.
I printed it in PLA at 20mm. The lid is a tight fit, so beware if your printer does not have good tolerances.
The box was printed without supports. I printed the lid on its side with support enforcements inside only, i.e. not on the decorative side.
Printed on a Prusa Mini+