Thingiverse
December 2020 Qidi Plus/X-Max Firmware Update by Eitri3D
by Thingiverse
Last crawled date: 4 years, 5 months ago
Please save the attached file to your USB drive, do not put them in the folder.
Then proceed with the instructions below to update:
Power off the printer.
Insert the USB drive.
Turn the printer back on.
Print the "update.qd"file. It will restart the screen and makes "dididi" sound.
(If a pop up says "the same firmware would not update," please continue to steps 5-7）
Print the "UI_4_3-单头快速.bin" file
Print the "wifiUpdate_full_V10.0.12.bin" file
Print the " PLUS X-MAX参数.gcode" file
After you print all the 4 files, the updating will be done.
Then proceed with the instructions below to update:
Power off the printer.
Insert the USB drive.
Turn the printer back on.
Print the "update.qd"file. It will restart the screen and makes "dididi" sound.
(If a pop up says "the same firmware would not update," please continue to steps 5-7）
Print the "UI_4_3-单头快速.bin" file
Print the "wifiUpdate_full_V10.0.12.bin" file
Print the " PLUS X-MAX参数.gcode" file
After you print all the 4 files, the updating will be done.