Thingiverse
Decap tray for RCBS reloading press by lcecil
by Thingiverse
Last crawled date: 4 years, 1 month ago
Replacement for the inverted "Y" tray on RCBS Rock Chucker Supreme reloading press. (Updated5/18 to improve support removal.)
Fits behind the ram, retained by a lug in the frame slot and slotted ring around ram. Remove shellholder before installing or removing the tray. Select preferred version for a hose that goes on either the left side or right side of the frame, then down to a small bottle or plastic jug to hold the spent primers and black debris.
Default version prints upright from STL files with support and 4mm brim in ABS or PLA.
Info@3DPrintnc.com for questions or support.
Fits behind the ram, retained by a lug in the frame slot and slotted ring around ram. Remove shellholder before installing or removing the tray. Select preferred version for a hose that goes on either the left side or right side of the frame, then down to a small bottle or plastic jug to hold the spent primers and black debris.
Default version prints upright from STL files with support and 4mm brim in ABS or PLA.
Info@3DPrintnc.com for questions or support.