Dead Space USG Ishimura remix by KingRidley

Last crawled date: 3 years ago

Okay fellas, this is not an easy print. Pay close attention to these instructions:

The part "ishimura back 01 repaired final" is NOT LEVEL.Make sure you put it flat on your build platform before converting to gcode. Should be pretty easy.


Some of these parts will need to be mirrored, some won't. Any part that has a separate part named "exact same file nameL" will NOT need to be mirrored, as the L stands for Left. AKA, left side of the ishimura. Anything that has a totally unique name will need to be mirrored and printed again after you print it once. This is because the parts that are listed as PART + PARTL have pegs and holes to help hold it together.


You're going to need to do some sanding on some of these parts, to make them fit. Seriously, it'll work but this print will fight you.

The fan things on the side of the body will need to be printed 9 times on each side, just so you don't have to count them out from bad photos.
I think everything should be fine, but I'm really new to this so I apologize if I made some obvious mistake. I'll try to fix things if necessary, but just be civil. But as you can see, I printed the dang thing after doing some edits to the files. I had the meshes repaired, removed some details that prevented things from fitting together properly, and made some parts thicker so they would actually print on my machine. I shrunk everything 75% to make it all print, and it still took days to get everything finished. But man is it cool. I also hope that my pictures will make it easier to understand how to assemble this thing.
Thank you to Nerohacat for putting all that hard work in to the original model. I know other people wanted to know if this was buildable, and I hope these modifications/repairs make this build more accessible to other people.