Thingiverse
Dart Case by AHoj3D
by Thingiverse
Last crawled date: 4 years, 7 months ago
This is a case for my darts.
There is room for replacement tips in the front part.
It was printed in two parts.
The parts are connected with a 1.5 mm thick wire.
Furthermore, two magnets(size: 12.4x2.4x5 mm) are needed for the closure.
Finally, some foam is needed to fix the darts.
There is room for replacement tips in the front part.
It was printed in two parts.
The parts are connected with a 1.5 mm thick wire.
Furthermore, two magnets(size: 12.4x2.4x5 mm) are needed for the closure.
Finally, some foam is needed to fix the darts.