Thingiverse
Daihatsu Cuore Toyota Yaris MY2007 washer water cap by MSpencer
by Thingiverse
Last crawled date: 4 years, 3 months ago
This is a nice cap as replacement for the original and brittle washer water cap of some Daihatsu / Toyota cars.
In my case it was a Daihatsu Cuore from 2007.
It should not be printed using ABS or PLA. I was using Taulman Nylon 645 and it works great.
You may use any other durable material that is flexible and robust when using in a car environment. But Nylon works great here.
Designed to be printed without supports. But for Nylon prints I do recommend a brim for better sticking to the build plate.
Print resolution should be less or equal to 0.2mm.
In my case it was a Daihatsu Cuore from 2007.
It should not be printed using ABS or PLA. I was using Taulman Nylon 645 and it works great.
You may use any other durable material that is flexible and robust when using in a car environment. But Nylon works great here.
Designed to be printed without supports. But for Nylon prints I do recommend a brim for better sticking to the build plate.
Print resolution should be less or equal to 0.2mm.