Thingiverse
Da Vinci Pro Radius PTFE fix idea by jartz
by Thingiverse
Last crawled date: 3 years, 1 month ago
DISCLAIMER - I don't have the "Pro", but a 1.0a, so I'm not even sure this 'fix' is enough for the Pro's jamming issue with the bend in the PTFE tube. (My extruder is part of the carriage, not a bowden setup)
But... I am a member of the Da Vinci group here on ThingiVerse, and they had a discusson on this issue. PEDMedia posted his fix: http://www.thingiverse.com/thing:1846161 - but I wondered if there was an easier way of doing this - IE by just using a new or longer PTFE tube with this 90 degree clip to bend it 'smoothly' to eliminate the kinking issue.
Let me know if it's viable and/or works. My aim was to come up with an easy fix that didn't require any hardware mods. ;-)
NOTE There are 4 different designs here - they are all based off the 180 degree PTFE tube clip from the SaintFlint extruder (here: http://www.thingiverse.com/thing:979113 ) - I didn't know how much 'bracing' would be necessary to maintain the 90 degree bend - so I created 4 different variants.
UNTESTED AS OF YET...
But... I am a member of the Da Vinci group here on ThingiVerse, and they had a discusson on this issue. PEDMedia posted his fix: http://www.thingiverse.com/thing:1846161 - but I wondered if there was an easier way of doing this - IE by just using a new or longer PTFE tube with this 90 degree clip to bend it 'smoothly' to eliminate the kinking issue.
Let me know if it's viable and/or works. My aim was to come up with an easy fix that didn't require any hardware mods. ;-)
NOTE There are 4 different designs here - they are all based off the 180 degree PTFE tube clip from the SaintFlint extruder (here: http://www.thingiverse.com/thing:979113 ) - I didn't know how much 'bracing' would be necessary to maintain the 90 degree bend - so I created 4 different variants.
UNTESTED AS OF YET...
Similar models
thingiverse
free
Ender 5 Pro Metal Extruder Frame Mosaic Palette PTFE (Teflon) Clip by Seattlest
... ptfe exit tube sequencing different colors or different materials.
this is a remix from https://www.thingiverse.com/thing:398515
thingiverse
free
Davinci XYZ pro 3in1 - PTFE fix
...n't got to much stress on the ptfe tube, also it doesn't hit the lid of the printer anymore.
https://youtu.be/cb1gbuchn8y
thingiverse
free
CR10S pro Extruder Modification by TheReverzer
...ing the ptfe tube. didn't have a problem with my ender 3, so i adjusted the clamp to fit the ptfe coupling from an ender 3.
thingiverse
free
Filament Tube Caps (Flashforge) by b1sh0p
...ign here: http://www.thingiverse.com/thing:340031
i didn't have any push-in connectors, so these work as an easy substitute.
thingiverse
free
CTC Extruder Bracket mod for ptfe by SaschaMunkes
...13
higher cable fix
hole for ptfe-tube
used with this thing:http://www.thingiverse.com/thing:370903
with adaptor.
ptfe: 9,4x1,7mm
thingiverse
free
Wanhao Duplicator i3 V2.1 Extruder Shroud with 4mm Friction Fit PTFE Tube by kkelemen
...se this: https://www.thingiverse.com/thing:1448260 and this https://www.thingiverse.com/thing:1473926 to cover the wires already
thingiverse
free
Ender-3 Direct Drive (Stock fan house) with BLTouch, Cable Guide, and Palette 2 Extruder Clip by clevi4
...dy.stl and p2_extruder_clip_nozzle.stl at 100% infill.
the original rubber ring for the ptfe tube is required for the clip nozzle
thingiverse
free
PTFE filament tube holder for Felix 3.0 printer by AlbertHeres
...etraction of the extruder. i have solved this issue with this new design. put in the ptfe tube and snap it on the extruder block.
thingiverse
free
Snapmaker A350 extruder Clip for Mosaic Palette by pbrochu888
...came with palette 2pro.
can be use with or without the ptfe tube.
i've print mine with 100% infill but should work with 20%
thingiverse
free
XYZ Da Vinci Extruder Chain Mount by TheBigSumo
...se with xyz da vinci 1,0 pro cable chain and mount
da vinci 1.0 pro cable chain mounts (http://www.thingiverse.com/thing:1873681)
Jartz
thingiverse
free
Pizza Warmer! by jartz
...er in a large zip-lock bag as pictured, or on a paper or heat-safe glass plate.
3) remove pizza after about 12 minutes and enjoy!
thingiverse
free
CTC Sunken LCD Bezel by jartz
... the bottom cover plate needs to be notched out to clear the lcd, which sits about 15mm lower than before. see pics for details.
thingiverse
free
CTC Digital Caliper Holder by jartz
...ssue, it does print out, and is only cosmetic, imho. (and i'm using it now!) i'll post the pics i took sometime soon...
thingiverse
free
Kossel E3D V6 Effector - No Probe by jartz
... m3 nylock nuts
updated clamp - i just added a 'v2' clamp that clamps the hotend better and helps keep it more vertical.
thingiverse
free
30MM Fan Mount for Kossel 2020 Printer by jartz
...be pulled out without much effort, but unless you're moving your machine around a lot, it will most likely just stay put. ;-)
thingiverse
free
CTC Mightyboard Standoff by jartz
...ast pic]
***note*** make sure you label all the connections before you remove them. ;-) it will make re-assembly much easier!!!
thingiverse
free
CTC Flashforge - Z-Axis Spindle Bearing - 12x8x3.5 MBB81235 by jartz
... the wall around the bearing a little bit more, as it's a bit thin right now, but it works. (i may not bother with it, lol!)
thingiverse
free
CTC Cooling Duct spring clip mounts by jartz
...f a spring from a 'click' pen. (i got my springs from a spring assortment i bought online)
let me know what you think!!!
thingiverse
free
Universal Dual 30mm Jumbo Glue Stick/Magigoo Holder by jartz
...ounts for more mounting flexibility. ;-)
10/2020 also works for magigoo!!! i now use magigoo instead of glue stick or hairspray!
thingiverse
free
60 MM LED Ring for Kossel printers with 30MM cooling Fan by jartz
...he print size by 1% or so if you'd like.)
print it in abs unless you wnat to see it melt during the first few prints, lol!
Vinci
3d_export
$9
clcok vinci
...clcok vinci
3dexport
clcok vinci
3ddd
$1
willisau vinci chair
...willisau vinci chair
3ddd
willisau , vinci
vinci chair from willisau ag.
design_connected
$13
Vinci chair
...vinci chair
designconnected
willisau vinci chair computer generated 3d model. designed by ballendat, martin.
3ddd
$1
BOVA-комод-vinci
...bova-комод-vinci
3ddd
bova , комод
bova-комод-vinci
3ddd
$1
leonardo da vinci
...leonardo da vinci
3ddd
всадник , лошадь
leonardo da vinci
3d_export
$25
a - leonardo da vinci
...a - leonardo da vinci
3dexport
a - leonardo da vinci<br>antiquity
turbosquid
$10
Pouf Vinci
...ty free 3d model pouf vinci for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1507069)
turbosquid
$30
Da Vinci
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$25
machine- leonardo da vinci
...machine- leonardo da vinci
3dexport
machine- leonardo da vinci
3d_export
$25
mortar - leonardo da vinci
...mortar - leonardo da vinci
3dexport
mortar - leonardo da vinci
Ptfe
3d_export
$16
uhb-zk40 200 mortar pump 16 specifications in total
...its anti adhesion ability is equivalent to that of ptfe so it is also outstanding in conveying some medium...
3d_export
$5
filament dry box
...hole in the front of the case for a ptfe tube fitting. suggested to have a wall thickness of...
thingiverse
free
PTFE Joiner by whitefoot
...ptfe joiner by whitefoot
thingiverse
ptfe joiner for join two ptfe tubes with two m6 fittings
thingiverse
free
PTFE adaptor by Greenthunder
...iverse
this is a remix of the ptfe coupler with the threads removed and the hole resized for a friction fit for the ptfe tubing.
thingiverse
free
PTFE Guide
...piece of ptfe tube in (od of ~4.1mm) to guide filament to the direct drive.
without it the filament spool was unraveling spaghet.
thingiverse
free
cut PTFE by omar95
...his thing to make the right cuts to the ptfe tube with a cutter, the base is triangular to help make the cut in a triangle shape
thingiverse
free
PTFE cap by dadenCKEP
...ptfe cap by dadenckep
thingiverse
used to seal the end of ptfe tubing.
created to be used as a cap for one-touch fitting.
thingiverse
free
clips raccord PTFE by xaviou
...clips raccord ptfe by xaviou
thingiverse
clips raccord ptfe
thingiverse
free
lmk12UU PTFE by Denis_IT
...nis_it
thingiverse
first versions of lmk12uu bearing with ptfe tube
-v0.5 remixed from https://www.thingiverse.com/thing:2297412
thingiverse
free
PTFE cutter by whpgab
... by whpgab
thingiverse
this is my own design for cutting 4mm ptfe tube. there is a cut along the tube hole to check size marker.
Radius
3ddd
free
radius counter stool
...radius counter stool
3ddd
барный
radius counter stool
turbosquid
$9
lamp radius moon
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
lamp radius flame
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
lamp radius sqware
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Шкаф купе Radius-line
... угловой
шкаф-купе фирмы radius-line.
сайт производителяhttp://www.radius-line.ru/
turbosquid
$25
Radius Tower 080207 01
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
cg_studio
$10
Tire with radius model A13d model
... a13d model
cgstudio
.lwo - tire with radius model a1 3d model, royalty free license available, instant download after purchase.
humster3d
$50
3D model of Toshiba Satellite Radius 12
... 3d model of toshiba satellite radius 12 in various file formats. all our 3d models were created maximally close to the original.
turbosquid
$15
DT M - Rectangular Duct - Bend - Short Radius - Flanged.rfa
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Pipes 4in x 6in Short Radius Reducing Bend
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Idea
3ddd
$1
IDEA GROUP
...idea group
3ddd
idea group
idea group, mistral comp
3ddd
free
idea group
...idea group
3ddd
idea
idea group laccato grigio viola lucido msp04
3ddd
$1
Doimo Idea SNAKE
...doimo idea snake
3ddd
комод , doimo idea
doimo idea snake
fbx and obj files
turbosquid
$69
lamp Idea
...rbosquid
royalty free 3d model lamp idea for download as max on turbosquid: 3d models for games, architecture, videos. (1487989)
3d_export
$5
Tv Shelf ideas
...tv shelf ideas
3dexport
tv shelf ideas
3ddd
$1
TREESSE IDEA
... idea
http://www.gruppotres.it/mobile/eng/box_doccia_idea.html
размеры: 82 x 90 x 216
turbosquid
free
Bad Idea
...model bad idea for download as blend, dae, fbx, gltf, and obj on turbosquid: 3d models for games, architecture, videos. (1584024)
turbosquid
$4
IDEA Icon
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
The Idea - Triptikh
...u/shop/mebel/mebel-dlya-doma/komody/interiernye-komody/26308-komod-triptikh
текстуры приложены, так же векторный файл.
3ddd
free
Novel Idea Caracole
...novel idea caracole
3ddd
novel idea , тумба
размеры 38w x 20d x 29.5h
Fix
3ddd
$1
Fixed Gear Велосипед
... fixed , bicycle
классический шоссейный велосипед, переделанный под fixed gear.
design_connected
$16
Idée fixe
...idée fixe
designconnected
jacco maris idée fixe computer generated 3d model. designed by maris , jacco.
3d_export
$5
fixing scale knob
...fixing scale knob
3dexport
fixing scale knob
turbosquid
$10
Mini Fix
...bosquid
royalty free 3d model mini fix for download as sldas on turbosquid: 3d models for games, architecture, videos. (1581558)
turbosquid
$49
fixed bike
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
Fixed Bicycle
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Bag Fixed
...bag fixed
3ddd
чемодан
a bag model by me
3ddd
$1
Кресло BEAU FIXE
...fixe
3ddd
beau fixe , ligne roset
кресло beau fixe:
w 80 cm d 106 cm h 97 cm sh 43,5 cm
turbosquid
free
Crowbar "Fixed"
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Fixed gear
...fixed gear
3ddd
велосипед
шоссейный велосипед с фиксированной передачей
Da
3ddd
$1
Luce da Vivere
...luce da vivere
3ddd
luce da vivere
luce da vivere mary 387/6+3
3ddd
$1
Luce da Vivere
...luce da vivere
3ddd
luce da vivere
luce da vivere
cristalline 494/12 rosso/cromo
turbosquid
$6
Cabinet DA
...ty free 3d model cabinet da for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1637312)
turbosquid
$6
Bookcase DA
... free 3d model bookcase da for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1639996)
turbosquid
$5
Wardrobe DA
...y free 3d model wardrobe da for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1661117)
turbosquid
$5
Partition DA
... free 3d model partition da for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1640359)
3ddd
$1
Ecstacity_LAMPADA DA TERRA
...ecstacity_lampada da terra
3ddd
ecstacity
торшер ecstacity_lampada da terra
3ddd
$1
leonardo da vinci
...leonardo da vinci
3ddd
всадник , лошадь
leonardo da vinci
turbosquid
$60
DA-ExoticWeapons
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$32
DA-SpikedChainMace
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Pro
turbosquid
$29
Pro
...ree 3d model mac pro for download as obj, c4d, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1505782)
turbosquid
$15
Apple Mac Pro and Pro Display
...ee 3d model apple mac pro and pro display for download as max on turbosquid: 3d models for games, architecture, videos. (1417078)
3d_export
$5
iphone 13 pro max and pro
...3 pro max and 13 pro the model is made in four colors (graphite, gold, silver, and blue), all of which are attached in the files.
3d_export
free
sapphire pro
...sapphire pro
3dexport
sapphire pro 3d printer head mask
3d_export
$4
macbook pro
...macbook pro
3dexport
macbook pro 13" inch 2020 years model
3ddd
free
GentleLase Pro
... syneron , candela
gentlelase pro аппарат для лазерной эпиляции
turbosquid
$25
PRO frame
...rbosquid
royalty free 3d model pro frame for download as max on turbosquid: 3d models for games, architecture, videos. (1148329)
turbosquid
$5
Alien pro
...osquid
royalty free 3d model alien pro for download as blend on turbosquid: 3d models for games, architecture, videos. (1678446)
turbosquid
$5
iphone11 pro
...uid
royalty free 3d model iphone11 pro for download as blend on turbosquid: 3d models for games, architecture, videos. (1562707)
3ddd
$1
Mac Pro (appel)
...mac pro (appel)
3ddd
компьютер , apple
mac pro