Thingiverse
Da Vinci 1.0/2.0 Filament Spool Assembly by TheCure
by Thingiverse
Last crawled date: 3 years ago
This assembly will accommodate filament spools ranging from 20-52mm diameter, and 12cm deep. Hopefully will cover the majority of spools out there. It's been tested with Hatchbox 1kg ABS/PLA, Hatchbox 1lb, Taulman 618 & 645 1lb, Ninjaflex 1/2 kg.
The spool rides on two hubs fitted with ball bearings, feeding into the filament guide, feeding into the stock filament guide, and finally into the extruder. (pictures to come) You will need to print: Da Vinci Hub x 2 Da Vinci Spool Carrier x 1 Da Vinci Filament Guides x 1 Da Vinci Quick Release Spool Fastener x1 or Da Vinci Threaded Spool Fastener If printing for the 2.0, you'll need another set of the above. I used this initially, but it was very time consuming to change spools so I modified the quick release I found elsewhere.
Hub spools require 608 bearing
I plasti-dipped the inward hub face to increase traction on the spools. Probably isn't needed however.
Quick release uses a 3mm bolt & nut.
You'll notice each of the hangers has a cut slot to fit into the Davinci case spline to prevent movement.
I printed all hangers at 90% infill. At least the spool hangers should be for necessary strength for the long rod (thats what she said)
The threaded rod prints the proper size on 50% infill or less, but 90% infill it prints too large - too large for the bearings to fit. I needed to sand the rod down post-print.
Finally the filament guide twin towers need to be offset rearwards so the rear canopy can fit.
With this installation the rear canopy can only open maybe 20cms.
Good enough for changing filaments.
The spool rides on two hubs fitted with ball bearings, feeding into the filament guide, feeding into the stock filament guide, and finally into the extruder. (pictures to come) You will need to print: Da Vinci Hub x 2 Da Vinci Spool Carrier x 1 Da Vinci Filament Guides x 1 Da Vinci Quick Release Spool Fastener x1 or Da Vinci Threaded Spool Fastener If printing for the 2.0, you'll need another set of the above. I used this initially, but it was very time consuming to change spools so I modified the quick release I found elsewhere.
Hub spools require 608 bearing
I plasti-dipped the inward hub face to increase traction on the spools. Probably isn't needed however.
Quick release uses a 3mm bolt & nut.
You'll notice each of the hangers has a cut slot to fit into the Davinci case spline to prevent movement.
I printed all hangers at 90% infill. At least the spool hangers should be for necessary strength for the long rod (thats what she said)
The threaded rod prints the proper size on 50% infill or less, but 90% infill it prints too large - too large for the bearings to fit. I needed to sand the rod down post-print.
Finally the filament guide twin towers need to be offset rearwards so the rear canopy can fit.
With this installation the rear canopy can only open maybe 20cms.
Good enough for changing filaments.
Similar models
thingiverse
free
Hatchbox Filament Spool Hub Mount for 608zz Bearings by mmoore0
...ever, it should work with any spool with a 54mm inner diameter hub. it is designed to use 608zz bearings on an 8mm threaded rod.
thingiverse
free
Filament Spool Stand by shrunkyboy
...the medium hub fits all of my other hatchbox spools. the rod with no hub fits the spools that came with my flashforge dreamer.
thingiverse
free
Hatchbox Filament Hubs for Prusa i3 MkII by SkippyMcSlappyPants
...ilament spools, and i made hubs for both sizes. just print two of whatever size you need and one center rod and you're done.
thingiverse
free
Da Vinci Pro Spool Holder with Bearings low tension by jdk201
...ace hardware. this is the best spool holder i have used, with almost no resistance on the filament as it feeds into the printer.
thingiverse
free
Da Vinci 1.0 Pro Low-Friction Spool Hanger with 608ZZ Bearings by AndiSplash
...eat up the metal with a lighter or heatgun to press it inside.
i hope you like this holder just as much as me, happy printing! :)
thingiverse
free
Universal-ish spool hub for Hatchbox and Taulman by bummster
... so i came up with this. used the area needed to support the bearing to work on a hatchbox spool.
made to fit a 608 bearing.
thingiverse
free
1lb Spool Holder Mount For Mendelmax by Bobbitay
...i found here: http://www.thingiverse.com/thing:13395
it works with a 608 bearing. you need to print a little rod to join the two.
thingiverse
free
Filament Guide by dentonsachs
...n from the spool on the wall to the da vinci pro printer. i figured i should upload this in case someone else had the same issue.
thingiverse
free
Filament Guide for Da Vinci PRO by Zalsobrooks
... and below a wall mounted spool holder to help feed the filament at the right angle. let me know if any modifications are needed.
thingiverse
free
XYZ Da Vinci 1.0/AIO Spool Holder (Version 2) by AngelDMercedes
...tchbox. even if it fits well the hatchbox spools, i decided to make it slightly longer to make sure that all spools will fit it.
Thecure
thingiverse
free
A Zipper tab by TheCure
...ab by thecure
thingiverse
used to complete the zipper on my large-zippered jacket which strangely never came with the zipper tab
thingiverse
free
Boscam 351 200mw vTx by TheCure
...boscam 351 200mw vtx by thecure
thingiverse
boscam 351 200mw vtx
thingiverse
free
1502 to 2204 motor adapter by TheCure
...1502 to 2204 motor adapter by thecure
thingiverse
1502 to 2204 motor adapter
thingiverse
free
Immersion 600mw vTx case by TheCure
...immersion 600mw vtx case by thecure
thingiverse
designed to protect antenna sma connector
thingiverse
free
Lamp shade replacement by TheCure
...cement by thecure
thingiverse
lampshade replacing 3 of the broken cheap, fragile shades that originally came with my floor lamp.
thingiverse
free
Enclosure for HobbyKing voltage monitor by TheCure
.../www.hobbyking.com/hobbyking/store/__41177__led_rx_voltage_indicator_for_lipoly_life_battery_us_warehouse_.html?strsearch=voltage
thingiverse
free
Parkjet 2 dual motor mount by TheCure
...parkjet 2 dual motor mount by thecure
thingiverse
intended to print 2 of these to fit dual motors to the hk parkjet 2
thingiverse
free
Boscam TS-352 case by TheCure
... the style from the ts-351 on here - but started from scratch.
soon to come a modified case to fit on a skywalker 2012 tail boom.
thingiverse
free
Nintendo Switch joycon main buttons by TheCure
...tton after i opened up the joycon to replace the broken joystick.
print with button top facing up at .05mm.
fits pretty darn well
thingiverse
free
Skywalker Air Scoops by TheCure
...tfab did a poor job of repairing the circular intake and made it solid inside. i've fixed it, and re-uploaded. [dec 07/2014]
Vinci
3d_export
$9
clcok vinci
...clcok vinci
3dexport
clcok vinci
3ddd
$1
willisau vinci chair
...willisau vinci chair
3ddd
willisau , vinci
vinci chair from willisau ag.
design_connected
$13
Vinci chair
...vinci chair
designconnected
willisau vinci chair computer generated 3d model. designed by ballendat, martin.
3ddd
$1
BOVA-комод-vinci
...bova-комод-vinci
3ddd
bova , комод
bova-комод-vinci
3ddd
$1
leonardo da vinci
...leonardo da vinci
3ddd
всадник , лошадь
leonardo da vinci
3d_export
$25
a - leonardo da vinci
...a - leonardo da vinci
3dexport
a - leonardo da vinci<br>antiquity
turbosquid
$10
Pouf Vinci
...ty free 3d model pouf vinci for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1507069)
turbosquid
$30
Da Vinci
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$25
machine- leonardo da vinci
...machine- leonardo da vinci
3dexport
machine- leonardo da vinci
3d_export
$25
mortar - leonardo da vinci
...mortar - leonardo da vinci
3dexport
mortar - leonardo da vinci
Spool
3ddd
$1
spool c53301
...spool c53301
3ddd
spool
spool c53301 650х350х145
turbosquid
$3
Cable Spool
...royalty free 3d model cable spool for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1457009)
turbosquid
free
Pallets and Spool
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Spool of String
...ol of string pink for download as c4d, 3ds, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1647892)
3ddd
$1
Подвесные светильники Spool
...ye/podvesnoy_svetilnik_spool_d320/ http://www.cosmorelax.ru/catalog/podvesnyye/podvesnoy_svetilnik_spool_d420/
3ddd
free
Spool 001 sofa
...spool 001 sofa
3ddd
roda
roda
collection spool
design rodolfo dordoni
dimensions:
lenght 90 cm
depth 94 cm
height 79 cm
turbosquid
$15
Roda Spool Sofa
...ee 3d model roda spool sofa for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1502650)
turbosquid
$95
wire spools 3ds
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
spool of TV wire
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
Simple and Fast Spool Holder
...ree 3d model simple and fast spool holder for download as stl on turbosquid: 3d models for games, architecture, videos. (1548546)
Filament
3ddd
$1
Filament Cage
...filament cage
3ddd
лофт , filament cage
модель бра, делалась по фото!
turbosquid
$3
FILAMENT COUNTER
...d
royalty free 3d model filament counter for download as stl on turbosquid: 3d models for games, architecture, videos. (1563049)
3d_export
$5
Filament lamp 3D Model
...filament lamp 3d model
3dexport
filament lamp 3d model kevin 54161 3dexport
3d_export
$5
Filament bulb candle 3D Model
...filament bulb candle 3d model
3dexport
filament bulb-candle
filament bulb candle 3d model kevin 54163 3dexport
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3ddd
$1
Factory filament metal shade
...factory filament metal shade
3ddd
restoration hardware
restoration hardware. 20th c. factory filament metal shade.
0
turbosquid
$12
Calligraphic Digit 0 Number 0
...hic digit 0 number 0 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389318)
3d_export
$6
set-0
...set-0
3dexport
turbosquid
$6
hedge 0
...yalty free 3d model hedge 0 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1450353)
turbosquid
$5
Nuber 0
...oyalty free 3d model nuber 0 for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1564674)
turbosquid
$22
0.jpg
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Steam Locomotive Fowler 4F 0-6-0
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Liquid Number 0
... model liquid number 0 for download as c4d, 3ds, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1689919)
turbosquid
$45
Dragon360_perspShape_tmp.0.jpg
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
Rocks Debris 0
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$18
wood-guardrail-fence 0
...wood-guardrail-fence 0
3dexport
wood-guardrail-fence 0<br>3ds max 2015
Assembly
3d_export
$7
Electronic product assembly machine assembly machine
...electronic product assembly machine assembly machine
3dexport
electronic product assembly machine assembly machine
3d_export
$15
generator assembly line
...ced and assembled in the form of module block. it is a demonstration project of generator assembly. welcome to download and learn
3d_export
$10
elevator traction machine assembly line motor assembly process
... traction machine assembly line motor assembly process
3dexport
elevator traction machine assembly line (motor assembly process)
3d_export
$16
pin assembly machine
...pin assembly machine
3dexport
pin assembly machine
3d_export
$7
tower-crane-assembly
...tower-crane-assembly
3dexport
tower-crane-assembly
turbosquid
$100
Engine Assembly
...id
royalty free 3d model engine assembly for download as stl on turbosquid: 3d models for games, architecture, videos. (1658296)
turbosquid
$100
Engine Assembly
...id
royalty free 3d model engine assembly for download as stl on turbosquid: 3d models for games, architecture, videos. (1658293)
turbosquid
$100
Engine Assembly
...id
royalty free 3d model engine assembly for download as stl on turbosquid: 3d models for games, architecture, videos. (1658291)
turbosquid
$75
Platform Assembly
...royalty free 3d model platform assembly for download as blend on turbosquid: 3d models for games, architecture, videos. (1472939)
turbosquid
$15
generator assembly
...y free 3d model generator assembly for download as and sldas on turbosquid: 3d models for games, architecture, videos. (1469469)
Da
3ddd
$1
Luce da Vivere
...luce da vivere
3ddd
luce da vivere
luce da vivere mary 387/6+3
3ddd
$1
Luce da Vivere
...luce da vivere
3ddd
luce da vivere
luce da vivere
cristalline 494/12 rosso/cromo
turbosquid
$6
Cabinet DA
...ty free 3d model cabinet da for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1637312)
turbosquid
$6
Bookcase DA
... free 3d model bookcase da for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1639996)
turbosquid
$5
Wardrobe DA
...y free 3d model wardrobe da for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1661117)
turbosquid
$5
Partition DA
... free 3d model partition da for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1640359)
3ddd
$1
Ecstacity_LAMPADA DA TERRA
...ecstacity_lampada da terra
3ddd
ecstacity
торшер ecstacity_lampada da terra
3ddd
$1
leonardo da vinci
...leonardo da vinci
3ddd
всадник , лошадь
leonardo da vinci
turbosquid
$60
DA-ExoticWeapons
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$32
DA-SpikedChainMace
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
1
turbosquid
$69
armchairs(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
ring 1+1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
chair(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
Chair(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
RING 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
house 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Table 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$59
Formula 1(1)
...lty free 3d model formula 1 for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1567088)
design_connected
$11
No 1
...no 1
designconnected
sibast no 1 computer generated 3d model. designed by sibast, helge.
turbosquid
$2
desert house(1)(1)
...3d model desert house(1)(1) for download as 3ds, max, and obj on turbosquid: 3d models for games, architecture, videos. (1055095)
2
design_connected
$11
No 2
...no 2
designconnected
sibast no 2 computer generated 3d model. designed by sibast, helge.
turbosquid
$6
Cliff Rock 2-2
...uid
royalty free 3d model cliff rock 2-2 for download as obj on turbosquid: 3d models for games, architecture, videos. (1619161)
turbosquid
$29
Book variation 2 2
...3d model book variation 2 2 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1366868)
turbosquid
$22
Classic baluster (2) (2)
...assic baluster (2) (2) for download as max, obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1483789)
turbosquid
$99
Smilodon 2 Pose 2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Barrel Barricade 2-2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
Wall Trophy (2) (2)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Tire label 2 of 2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Кровать, 2 тумбочки, 2 светильника
...кровать, 2 тумбочки, 2 светильника
3ddd
кровать, 2 тумбочки, 2 светильника
нормальное качество
формат 3ds max
без текстур
3ddd
free
Кровать, 2 тумбочки, 2 светильника
...кровать, 2 тумбочки, 2 светильника
3ddd
кровать, 2 тумбочки, 2 светильника
нормальное качество
формат 3ds max
без текстур