Thingiverse
Da Vinci 1.0 Replacement Filament Guide by BenW
by Thingiverse
Last crawled date: 4 years, 1 month ago
This is a replacement filament guide for a XYZ Da vinci 1.0 that fits between the upper filament tube and the gears (as seen in the second blurry photo). My original piece snapped somehow and whenever I would try to put in filament it wouldn't make it to the gears. This is NOT an modified guide to print flexibles, just an OE part so to speak.
Sliced with Cura at .2mm layer height, 10mm/s (it's quite small), no supports necessary but can be added if you wish. Only took about 12 minutes to print.
For those of you that it doesn't import scaled for some reason, scale to 10:1 (should be 9mm tall, ~22.4mm long, 19mm Wide)
Sliced with Cura at .2mm layer height, 10mm/s (it's quite small), no supports necessary but can be added if you wish. Only took about 12 minutes to print.
For those of you that it doesn't import scaled for some reason, scale to 10:1 (should be 9mm tall, ~22.4mm long, 19mm Wide)