D4V2 Diffusor by Mietjelan

...ivi elementum scales & backspacer by mietjelan thingiverse these are little oversized so they have to be sanded to the edge.

...;ve printed it and the dimensions seem to match my real d4v2. this is mostly useful for designing things that work with the d4v2.

...ge, other for lantern mode. i printed with a 0.6mm nozzle at 0.3 layer height but probably not fussy to smaller or larger layers

...ng chamfers to the lanyard hole and end cap knurling update 1/4/2021 knurling pitch is now accurate bezel profile is now accurate

...two 18350 batteries. b. the emisar d4 flashlight in 18350 configuration, an 18650 tube, one 18650 battery, and one 18350 battery.

...ps://www.blackdiamondequipment.com/en_us/product/vario-chest-harness/ in the immortal words of youtube’s matt smith, “good lux.”

... parete diffusore designconnected artemide tolomeo parete diffusore computer generated 3d model. designed by de lucchi, michele.

... anello светильник tolomeo suspension decentralized solo diffusore anello из новой коллекции artemide

...45 degrees while elevated by an opaline glass globe diffusor that appears to float over its marble cylinder base....

...wf502b diffusor by ripper121 thingiverse wf502b diffusor

...flash diffusor by jerome_k thingiverse large diffusor for pop-up flash. attenuates the shadow of the lens at wide angle.

...diffusor for led lights by bktrie thingiverse a diffusor for led stripes .... build with spiral printing

...thrunite tn4a diffusor by tigra thingiverse diffusor for thrunite tn4a. works well, but the fit could be a bit strong.

... 9 mm just a quick project to put down the preasure in the chillum when in use and to get a better cooling/mixing with the water.

...nikon flash diffusor by hac78 thingiverse remix of a great diffusor to fit my nikon d90. printed my in natural petg.

...dach diffusor by suter-3d-design thingiverse dach diffusor zum selber ausdruckern