Thingiverse
CZ Scorpion EVO S1 Grip by pc-tech
by Thingiverse
Last crawled date: 4 years, 3 months ago
CZ Scorpion EVO S1 Grip.
Printed and tested on my CZ Scorpion.
I'm Not a Professional CAD Designer so Please print at your own risk. I do this as a hobby.
I would appreciate tip as this one took some time to get right.
You will need a M4 nut and a longer M4 screw. There's a reason CZ's and all aftermarket grips use an insert. I was not able to use the factory screw.
I printed my from PLA as a proof of concept, and I do not plan to go any further than this.
Thank you
Printed and tested on my CZ Scorpion.
I'm Not a Professional CAD Designer so Please print at your own risk. I do this as a hobby.
I would appreciate tip as this one took some time to get right.
You will need a M4 nut and a longer M4 screw. There's a reason CZ's and all aftermarket grips use an insert. I was not able to use the factory screw.
I printed my from PLA as a proof of concept, and I do not plan to go any further than this.
Thank you