Cutting Guide for Prusa Face Shield RC3 (Requires at least 240x240mm build plate) by mofosyne

Last crawled date: 5 years, 2 months ago

Cutting Guide for Prusa Face Shield RC3 (Requires at least 240x240mm build plate)
Brian Khuu (March 2020) mofosyne@gmail.com

This is a cutting guide based on the laser cut spec diagram for the replaceable face shield sheets:
https://www.prusaprinters.org/prints/25857-prusa-protective-face-shield-rc3

It consists of a upper drill guide as well as a lower base for cutting the surrounding sheets.
I have not tested this design as it requires a build plate that is larger than my 200x200mm buildplate. But it may be of use for others.

* faceShieldSheetModel() : This is the model of the face shield sheet
* faceShieldDrillGuide() : This is the drill guide
* faceShieldCuttingGuide() : This is the cut guide with alignment holes

# Generate Models
openscad -Dmode=0 -o prusaFaceShieldCutGuide_model.stl prusaFaceShieldCutGuide.scad
openscad -Dmode=1 -o prusaFaceShieldCutGuide_drillGuide.stl prusaFaceShieldCutGuide.scad
openscad -Dmode=2 -o prusaFaceShieldCutGuide_cutGuide.stl prusaFaceShieldCutGuide.scad

# MacOS generate model
/Applications/OpenSCAD.app/Contents/MacOS/OpenSCAD -Dmode=0 -o prusaFaceShieldCutGuide_model.stl prusaFaceShieldCutGuide.scad
/Applications/OpenSCAD.app/Contents/MacOS/OpenSCAD -Dmode=1 -o prusaFaceShieldCutGuide_drillGuide.stl prusaFaceShieldCutGuide.scad
/Applications/OpenSCAD.app/Contents/MacOS/OpenSCAD -Dmode=2 -o prusaFaceShieldCutGuide_cutGuide.stl prusaFaceShieldCutGuide.scad