Thingiverse
Customizable mount point adapter, connector, and spacer by ggroloff
by Thingiverse
Last crawled date: 4 years, 7 months ago
This is a customizable mount point adapter, connector, and spacer.
I have no idea why it doesn't work in the customizer web app, but it works fine in OpenSCAD
You can use this to connect one array of mount points to another, for example, mounting your upgraded 360w power supply on the existing mount points of the Anet A8.
Basically it is a connector of two points, and a separator of specific distances
As always, sand the contact surfaces to distribute loads across the part with friction.
You can set:
Thickness
Width
Shape (rounded, cornered, hex)
Distance between holes
Diameter of holes
Countersinks (cone, cylindrical)
Nut slots
Depth of countersinks and nut slots
What side of the piece each countersink or nut slot will be on
You'll need supports if the countersinks are on opposite sides, unless its a cone that faces down
I have no idea why it doesn't work in the customizer web app, but it works fine in OpenSCAD
You can use this to connect one array of mount points to another, for example, mounting your upgraded 360w power supply on the existing mount points of the Anet A8.
Basically it is a connector of two points, and a separator of specific distances
As always, sand the contact surfaces to distribute loads across the part with friction.
You can set:
Thickness
Width
Shape (rounded, cornered, hex)
Distance between holes
Diameter of holes
Countersinks (cone, cylindrical)
Nut slots
Depth of countersinks and nut slots
What side of the piece each countersink or nut slot will be on
You'll need supports if the countersinks are on opposite sides, unless its a cone that faces down