Thingiverse
Customisable Ormerod Duet enclosure by bobtidey
by Thingiverse
Last crawled date: 4 years, 7 months ago
A customisable version of the enclosure for the Duet electronics for the reprap Ormerod printer.
Customisations include
Overall depth for extra room
Extra mounts to allow better horizontal positioning
PC board can be separate from main mounts to allow enclosure mounting with PCB in place
Base can be solid or hollow (using original acrylic plate)
Wall near cables can be cut out or filled in
Ventillation holes
Cut out for aux 5v connector
Optional extra are reset / erase pins and guides to allow these two on board buttons to be easily pressed without taking cover off
Customisations include
Overall depth for extra room
Extra mounts to allow better horizontal positioning
PC board can be separate from main mounts to allow enclosure mounting with PCB in place
Base can be solid or hollow (using original acrylic plate)
Wall near cables can be cut out or filled in
Ventillation holes
Cut out for aux 5v connector
Optional extra are reset / erase pins and guides to allow these two on board buttons to be easily pressed without taking cover off