Custom Creation lightsabers Mk1 by Impul5e101

Last crawled date: 4 years, 7 months ago

This is my first lightsaber from the custom creation collection, the Mk1. Designed in Fusion 360, this should be easy to print within a couple of days.
The only supports needed are for the emitter guards. There are 2 types of dowels used to help line all the parts up. Depending on how good your printer is, I uploaded both sizes just in case.
All parts were glued together with Araldite which gives you a few minutes for adjustment. I recommend glueing only 2 emitter guards at a time, due to the others falling out whilst the glue sets.
The inserts for the Pommel, Emitter and power block are a push-fit and should not need glueing.
Here is a list of the number of parts needed:
1 x Emitter
1x Emitter insert
6x Emitter coil guard
1x Emitter coil
1x Main body
1x Pommel
10x Pommel inserts
2x Grip ring 1
2x Grip ring 2
3x Grip spacer
1x Power block
1x Power block insert
1x Power block strip 2.0mm
2x Power block strip 1.2mm
1x Button block
1x Button
3x 10x4 or 10x5 plug
Enjoy the print & Build!