Thingiverse
CTF-HallOfGiants - Unreal Tournament '99 by 27v0XjvQTTuRUaX6xw
by Thingiverse
Last crawled date: 4 years, 7 months ago
Unreal Tournament '99 CTF-HallOfGiants
No support structure needed, infill 20%. Print as large as possible otherwise you will loose too much detail! I printed it 20cm wide and the bridges are still very thin.
Possibly it's better to cut it in two pieces, and superglue it together after printing. Though this will be a bit troublesome with the bridges in the middle of the model. I might create two special made STL files for this purpose, with easy to remove supports, in the future.
No support structure needed, infill 20%. Print as large as possible otherwise you will loose too much detail! I printed it 20cm wide and the bridges are still very thin.
Possibly it's better to cut it in two pieces, and superglue it together after printing. Though this will be a bit troublesome with the bridges in the middle of the model. I might create two special made STL files for this purpose, with easy to remove supports, in the future.