Thingiverse
CTC - Side SpoolHolder - with some features. by FunkyArt
by Thingiverse
Last crawled date: 4 years, 7 months ago
This is an easy to mount and fast to Print Spool holder.
I was looking for an easy to install spoolholder that doesn't harm the filament transport and fits any kind of Spools (for example: Small FlexiSmart spools- Picture 4)
The result was that i maked this one. Its stable, clean and fast to Print.
Fast2Print (0.3mm - 25% infill -3 cells) = 55min
2 diffrent axis length to match the spool wide.
Feature Addons:
Filamentguide support (i recommend it)
Flexible spacer to fit any spoolwide
Stackable, 3 Holder = 2 Spools,..
Ball-bearing axis !
The Bearings are also easy to print and they works directly after printing :).
Print the bearings with 100% infill (you need two for one axis) without support and (if possible) without raft.
Work in progress..
stand alone version
greetz
I was looking for an easy to install spoolholder that doesn't harm the filament transport and fits any kind of Spools (for example: Small FlexiSmart spools- Picture 4)
The result was that i maked this one. Its stable, clean and fast to Print.
Fast2Print (0.3mm - 25% infill -3 cells) = 55min
2 diffrent axis length to match the spool wide.
Feature Addons:
Filamentguide support (i recommend it)
Flexible spacer to fit any spoolwide
Stackable, 3 Holder = 2 Spools,..
Ball-bearing axis !
The Bearings are also easy to print and they works directly after printing :).
Print the bearings with 100% infill (you need two for one axis) without support and (if possible) without raft.
Work in progress..
stand alone version
greetz