Thingiverse
CTC Dual Extruder Fan Mounts by KimBrown
by Thingiverse
Last crawled date: 3 years ago
Having had the CTC Dual Extruder a couple of days now, I soon realised what a major pain it was going to be adjusting the Extruder heights. From new it's ok and fairly easy with nice clean nozzles, but getting to the Grub screw to adjust the height was still not that easy. First you have to undo the Cooling Fan, catch the spacer and heat sink when they fall out, then putting it all back together afterwards, was fiddly to say the least.
So the Scope of these Fan Mounts:-
1) Retain the Cooling of the Fans.
2) Allow Easy Access to the Nozzle Grub Screw.
3) Allow the Nozzle to be Adjusted when HOT!
So here is my Solution. The Fans are tilted Up at a angle, and the new Fan Mounts have a Groove in each to allow access to the Locking Grub Screw. The two original Fan Mounting Screws are re-used to hold the New Mount, Original Spacer, and HeatSink in Place. In addition to the new mounts you will also need Two M3 x 16mm screws to fit the Fan back in the new position. Also you need to file a Groove in the Original HeatSink to allow access to the Grub Screw. I temporarily screwed my Left Heatsing to the New Right Mount (and vice verser for Right Heatsink), and used the new mounts as a template for size of Groove.
Now I can adjust the Nozzles when Hot, and the Grub screws are easy to access.
Hope you enjoy using the new mounts. I used PLA @180' with a Bed temp of 57'.
Enjoy....
So the Scope of these Fan Mounts:-
1) Retain the Cooling of the Fans.
2) Allow Easy Access to the Nozzle Grub Screw.
3) Allow the Nozzle to be Adjusted when HOT!
So here is my Solution. The Fans are tilted Up at a angle, and the new Fan Mounts have a Groove in each to allow access to the Locking Grub Screw. The two original Fan Mounting Screws are re-used to hold the New Mount, Original Spacer, and HeatSink in Place. In addition to the new mounts you will also need Two M3 x 16mm screws to fit the Fan back in the new position. Also you need to file a Groove in the Original HeatSink to allow access to the Grub Screw. I temporarily screwed my Left Heatsing to the New Right Mount (and vice verser for Right Heatsink), and used the new mounts as a template for size of Groove.
Now I can adjust the Nozzles when Hot, and the Grub screws are easy to access.
Hope you enjoy using the new mounts. I used PLA @180' with a Bed temp of 57'.
Enjoy....
Similar models
thingiverse
free
PrintrBot Simple 30mm Cooling Fan Mount by lewisrl4x4
...the extruder using 35mm m3 screws. when installed proper clearance is allowed for access to the extruder for tension adjustments.
cults
$9
Raise3D N2/Plus - Upgrade Cooling Fan Mount for controlled cooling
...0, but attention: it could touch/hit the frame when it come into the home position. i have adjusted the end-switch to avoid this)
thingiverse
free
Rigidbot Easy Print Cooling Fan Mount for Dual Extruder by sockles
...bot easy print cooling fan mount for dual extruder by sockles
thingiverse
cooling fan mount for those of us with dual extruders.
thingiverse
free
Wade Extruder Dual Fan Adapter by mprobot
...s) and allows you to have two fans. i use it to allow me to have a fan that cools the extruder body and one that cools the print.
thingiverse
free
Replicator (plus CTC and other Clones) Dual Extruder Level by Inhibit
...it a day. i also put mounting screw holes similar to other tools in case they come in handy...
thingiverse
free
G2S 40mm hot end fan bracket by wbrucem
... the print. one fan, double duty.
so i now have implemented print cooling without adding significant mass or bulk to the spider.
thingiverse
free
Anet A8 alternative 40mm Extruder Fan Mount by SentinelRX5
...ng the heatsink and fan away from the end of the extruder allows better access when loading filaments and also reduces fan noise.
thingiverse
free
Z5 E3D Dual Extruder Spacer by Nvision81
... spacer has mounting holes for 3 screws to attach to the extruder heatsink and 1/8 threaded filament holes for pneumatic fittings
thingiverse
free
E3D V6 Mount with Fan Replicator2x / Replicator by wundel
...00 parts on the back (the ctc already has the correct mounting holes).
the left hotend has around 1 mm play for hight-adjustment.
thingiverse
free
MK7 extruder filament dual cooling fan adjustable mount by cwthoma
...using it on my mk7 extruder. i reinforced the side mount was having trouble with pla bending from the heat and weight of the fan.
Kimbrown
thingiverse
free
Printer Bed Leveling STL by KimBrown
...t
starts to pick up colour all over the bed, and the feeder doesn't skip.
that's your bed really nice and level now... :)
thingiverse
free
CTC Replicator 2 (and other Makerbot Clones) Display Guard by KimBrown
...d keep your printer safe... :)
kim..
(i printed mine on the ctc makerbot dual clone using pla 190' and a bed temp of 57')
thingiverse
free
CTC 3D Printer DTI Mounting Beam by KimBrown
... wing on the side of the mounting beam to operate the x axis micro switch, if you'd like to measure in a particular position.
thingiverse
free
CTC Spring Loaded Feeder (s) by KimBrown
...earance.
i'll let the pictures do the rest of the talking... oh one last thing the shim plates are left and right handed btw.
thingiverse
free
Simple J Head Extruder Mount for Ormerod by KimBrown
... of the microswitch, and the other for the hotend wiring. i will be adding some more, when i decide on a suitable 6pin connector.
thingiverse
free
1mm Extended Ormerod Nozzle Mount with Microswitch (2 Versions) by KimBrown
... the nozzle mount is extended by 1mm to suit some of the probes that are doing the rounds if you fancy switching between systems.
thingiverse
free
Filament guide for MK8 spring loaded aluminium arms for CTC Replicator Flashforge Dual (update: for flex) by 3DWorkhorse
...the moment. hi folks! i really liked the idea kimbrown had about mounting an existing aluminium/aluminum feeder arm to...
thingiverse
free
Big Blue 360 Complete by KimBrown
...ers unless your wiring in a led.... but i did inform them, and they were supposed to be updating the wiring diagram for the duet.
thingiverse
free
Easy Fit Extended Nozzle Mount for Ormerod 3D Printer by KimBrown
...e nozzle mounting screw holes and plenty of clearance around the bowden tube fitting, so no fighting to get it mounted.
enjoy....
Ctc
turbosquid
$4
CTC Railroad Telephone
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$7
Onibus Ciferal Padron Briza Volvo B58e CTC Azul
...briza volvo b58e ctc azul for download as blend, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1692482)
thingiverse
free
Double extruder for CTC 3 pro or AM8 by jiemeb
...n double extruder . imprimante d'origine ctc3 pro modifié m8.
je vous propose divers ventilation en fonction du ventilateur
thingiverse
free
Printer lamp stand (CTC i3 MK8) by DP73
...printer lamp stand (ctc i3 mk8) by dp73
thingiverse
stand for the print head for a 12v led bulb (t5) available in a car shop
thingiverse
free
CTC A13 Spool Holder Arm by Waggie1
...ds have stripped. v2 can be attached by drilling the frame horizontally and bolting through the frame with m4 bolts and washers.
thingiverse
free
CTC A13 Spool Holder Arm by Waggie1
...e stripped. the frame can be drilled horizontally and the spool holder bolted through the frame with long m4 bolts and washers.
thingiverse
free
CTC A13 LCD Screen Back Cover by Waggie1
...and ribbon connector cut-outs match the ctc a13 control unit. long screws may be required to attach the cover to the front plate.
thingiverse
free
CTC A13 Tool Holder by Waggie1
...1
thingiverse
this part is based on other tool holders uploaded for the ender 3. i allows the storage of all of the a-13 tools.
thingiverse
free
Ender Style Side Spool Holder 45 Degree Remix by drewadc
...the arm so that it mounted up to my ctc a13 (ender 3 clone) original spool holder, which is...
thingiverse
free
CTC Prusa I3 (Anet A8) Z-Axis Adjustment Knob by daneelg
... also a "stopper" part, which must be used together with an m3 nut, to fasten the adjustment screw (like in the photo).
Dual
3d_export
$49
LG L70 Dual Black 3D Model
... cellular 2g 3g ips lcd
lg l70 dual black 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl humster3d 103896 3dexport
3d_export
$49
Nokia 225 Red 3D Model
...3dexport nokia 225 cell phone mobile cellular 2g keyboard dual tft lcd red nokia 225 red 3d model download...
3d_export
$49
LG L65 Dual White 3D Model
...ouchscreen touch screen
lg l65 dual white 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl humster3d 103755 3dexport
3ddd
$1
Мобильный телефон Nokia Asha 210 dual-sim
...ual-sim
3ddd
nokia , телефон
profi 3д модель мобильного телефона nokia asha 210 dual-sim
3d_ocean
$15
Microsoft Lumia 535 Orange
...microsoft lumia 535 orange 3docean android cell dual lumia microsoft nokia phone sim smart windows - realistic,...
3d_ocean
$17
SMA's Dual Material Packs-Porcelain for Cinema 4D
...tion: this is my dual material series based on custom made hi-res 4k porcelain textures. the library contains 20 material. 10 ...
3d_ocean
$15
Element 3D - Microsoft Lumia 535 Green
...3d - microsoft lumia 535 green 3docean android cell dual lumia microsoft nokia phone sim windows - realistic, detailed...
3d_ocean
$15
Microsoft Lumia 535 White
...microsoft lumia 535 white 3docean android cell dual lumia microsoft nokia phone sim windows - realistic, detailed...
3d_ocean
$25
SMA's Dual Material Pack - Wood-S02 - Parquet C4D
...arquet description: here i present you with wood series 02 – parquet dual materials library for cinema 4d. all textures used a...
3d_ocean
$10
Modular Dungeon Set|Dual Teeth Wall Pack (8 of 20)
...ngeon set. (also has an all-in-one pack if you plan on buying them all) this dual teeth wall pack comes with a high quality lo...
Extruder
3ddd
$1
Footrest
...footrest
3ddd
footrest , tom dixon
extruded footrest inspired by tom dixon
3d_ocean
$5
Neon Light 3d Alphabet Set A-Z
...ckground, camera, sweep and extrude effects. you can change light color and material color to make another scene if you want. ...
3d_ocean
$3
Espresso Cup
...espresso cup
3docean
a fully editable espresso cup with lathe and extrude objects.
3d_ocean
$10
Pattern
...pattern
3docean
extrude
national ornament
3d_ocean
$3
Christmas Ball
...clause cold cool fir flake freeze frozen funny happy merry red reflect santa snow white
pretty christmas ball with stars extrude.
3d_ocean
$5
United States national emblem
...us national emblem
high polygon model, poly modelling, not just displacement extruding. goot for 3d printing or wax\wood milling.
3d_ocean
$12
Director Chair
...5 high details modeling and textures most of the model are still extrude nurbz & splines and some pc are poly with hypernurbs
3d_ocean
$25
NFL logos pack
...o, afc logo and 3d digits). it was made from vector files with extrude nurbs tool. all logos are editable. poject has material...
3d_ocean
$12
Beautiful Planet Earth
...extruded geometry for more realism. all textures are 8000×4000 in size. object includes: 3 diffuse textures( you choose which ...
3d_ocean
$10
World Globe (political)
...also every countriy ,large closed seas and lakes are named and colored with diferent colours . this item can be used for prese...
Fan
3d_export
$5
Ceiling fan 3D Model
...ort
ceiling room fan extractor extract interior 3d model light bulb blade rotor lamp
ceiling fan 3d model mimicmwb 24939 3dexport
3ddd
$1
STEALTH FAN
...stealth fan
3ddd
вентилятор
model included with texture
3d_ocean
$15
Westinghouse fan
...tinghouse fan, a great vintage interior set piece. all file formats are tested and work as they should and are subdivision ready.
3d_ocean
$39
Low Poly urban pack
...low poly urban pack 3docean bank buildings city dumpster fan fence flat furniture garbage generator high voltage hotel low...
3d_ocean
$7
Plane Low Poly (rigged)
...low poly low poly plane rigged vehicles wings plane fan and plane wheel door (open – close) rigged materials...
3d_ocean
$85
Scion FR S Cabrio 2015
...made at direction of the author and created for fan . so if you...
3d_ocean
$4
Facebook Like Thumb Up Hand Icon
...hand icon 3docean business button click clicked clicking facebook fan follow friendship internet like liked mouse social media thumbs...
cg_studio
$50
Baseball Stadium arena3d model
...sport arena game field city athletics sports audience crowd fan olympic dugout .obj .3ds .fbx .max - baseball stadium...
cg_studio
$35
Baseball stadium pitch diamond low poly3d model
...sport arena game field city athletics sports audience crowd fan olympic dugout .max .fbx .3ds .obj - baseball stadium...
3ddd
$1
TEFCOLD Минибар BA10H
...мини бар , бар product features: interior led light fan assisted cooling double glazed reversible door 2 adjustable shelves...
Mounts
3ddd
$1
Vega flush mount lamp
...t lamp
3ddd
dimensions: 22.5"wx22.5"dx12"h
размеры: 58см х 58см х 31см
v-ray light included | v-ray light внутри
3ddd
$1
Currey & Company Balthazar
...or model for easy change or setup.
object at 0.0.0, clean and light scene.
the archive contains the obj file and more previews.
3d_ocean
$5
Rock_6
...unt mountain rock rocks stone
rock_6….............1474.polygon. .1476.vertices. 4096 * 4096 texture. obj,fbx,blend format models.
3d_ocean
$19
Low Poly Hotel
...s, flower beds and flower pots, trees, brunches, street lights, trashcans, wall mounted air freshener, air conditioners, fire ...
3d_ocean
$25
Low Poly Buildings
...e/warehouse, one grocery/minimarket, flower beds and flower pots, wall mounted air freshener, air conditioners, air intake, ae...
3d_ocean
$5
rock_4
...d rock rock stone
rock_4…...............1419.polygon. .1421.vertices. 4096 * 4096 texture obj,fbx,blend format model. game ready.
3d_ocean
$5
mountain_9
...n_9…........................12560 polygon. ...12562 vertices. 4096 * 4096 texture obj , fbx , and blend format model. game ready.
3d_ocean
$25
Low Poly City Block
... cafe, store/shop/supply/cafe building, flower beds and flower pots, trees, brunches, street lights, trashcans, wall mounted a...
3d_ocean
$5
Rock_3
...ount mountain rock stone
rock_3…..............6048.polygon 6127.point. 4096*4096 texture. obj,fbx,blend format model. game ready.
3d_ocean
$5
Rock_2
...unt mountain rock stone
rock_2…...............3196.polygon 3248.point. 4096*4096 texture. obj,fbx,blend format model. game ready.