Crow's Foot Flare Nut Wrenches by NikitaCN

Last crawled date: 2 years, 11 months ago

I needed a flare-nut wrench to work on my brake lines, so I made this. Only the 10 mm short version has been tested, the others are added just in case they're useful for you.
To use, you need a 3/8" socket wrench. Select the "short" or "long" version of the size you need. The short version should work with most socket wrenches, but the long version might be needed if more clearance is necessary. Print the appropriate file, plus the "...clamp.stl" file for that size.
Don't expect this to survive more than a couple nuts, or to work with very rusted fittings. It's still plastic!
Metric:
9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 17 mm, 19 mm, 22 mm, 24 mm, 27 mm, 32 mm, 41 mm
SAE:
7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 15/16", 1 1/16", 1 1/8", 1 1/4", 1 5/16"
Inspired by mh2014's part: https://www.thingiverse.com/thing:845581