Thingiverse
Crossbow Micro Scorpio
by Thingiverse
Last crawled date: 5 years, 4 months ago
This is my first prototype of a reverse compound micro crossbow.
After Printing there are some problems with the clearances. On the triggermechanism some holes have to be drilled out to work without friction. Also there is some sanding to fit the parts together.
The mechanism works and it also shoots. But after every shoot the bowstring slips from the cams. Maybe an stringstopper will solve this problem.
The Parts are designed to print without supports when printed flat on the bed.
Print every part once, except cambolt has to be printed 2 times
After Printing there are some problems with the clearances. On the triggermechanism some holes have to be drilled out to work without friction. Also there is some sanding to fit the parts together.
The mechanism works and it also shoots. But after every shoot the bowstring slips from the cams. Maybe an stringstopper will solve this problem.
The Parts are designed to print without supports when printed flat on the bed.
Print every part once, except cambolt has to be printed 2 times